Haven't had a "Post your guns pics" thread in a while - PLEASE NO ANTI GUN PERSONNEL!

[raceshop147]

IMG_2298.jpg
Ruger precision .308 w silencerCo omega + vortex optics


Sent from my iPhone using Audizine Forum

[ericw.]

Finally found a decent place to run drills and do training, and it's less than an hour from my house.

[Gunnarrrrr]

Finally found a decent place to run drills and do training, and it's less than an hour from my house.

you’re taking me.


Sent from my iPhone using Audizine Forum

[ericw.]

you’re taking me.


Sent from my iPhone using Audizine Forum

Send me a PM on Facebook or IG if you really want to connect.

[Gunnarrrrr]

Send me a PM on Facebook or IG if you really want to connect.

Maybe i’ll get back on social media someday. My little gen z brain is still too undeveloped for that, you’ve seen what happens to the other ones

Also I rented a place in roseville for a week like a month ago, honestly, I’ve settled on auburn for the spring move. sorry but looks like we can’t be neighbors. roseville’s a little too flat for me, & the lots are small and getting smaller:( I grew up in the mountains, i’ll die in the mountains. Just gotta budget an extra $300 a month for that pge bill… wait, they hiked rates this month. $400

I still trip out when I see your name, cause my uncle is literally Eric W.


Sent from my iPhone using Audizine Forum

[Avantly]

Anyone in this MI group go elk hunting out west?

[ericw.]

Next up: Another AR build and a PCC build.

[BurnTheObedient]

I love threads like these!

My current lineup from most used to least.

EDC: Smith and Wesson M&P .45
Backup: Smith and Wesson M&P 9c
Home defense: Benelli M4 with extended mag, surefire gun light,

.300 Blackout pistol - Bear Creek Arsenal side charger, Aero Precision upper, Law Tactical Folder, Omega 30 suppressor. The whole setup is built to be concealed in a backpack. Overall length folded and minus suppressor is about 16 inches.
Remington 700 SPS chambered in 6.5 Creedmoor
S&W 5.56 AR
Ruger .450 Bushmaster AR
Aero Precision AR .308
Mossberg 500A 12 gauge

[Hostile]

I'm looking for recommendations to get a RMR cut for my VP9.

Does anyone have and recommendations for gunsmiths that do milling in Northern VA or for any of the online shops like MapleLeap, DP or JagerWorks?

[Gunnarrrrr]

I'm looking for recommendations to get a RMR cut for my VP9.

Does anyone have and recommendations for gunsmiths that do milling in Northern VA or for any of the online shops like MapleLeap, DP or JagerWorks?

I mailed out my G19 slide to DP for an rmr cut and they did a great job, and it was cheaper than any of the local shops. They turned it around in about a week.


Sent from my iPhone using Audizine Forum

[Gunnarrrrr]

nvm I looked again it was more like 2 weeks. but they did quote like 6. can’t edit posts in this thread because title character limit error


Sent from my iPhone using Audizine Forum

[Hostile]

Cool, thanks man.

[ericw.]

I'm looking for recommendations to get a RMR cut for my VP9.

Does anyone have and recommendations for gunsmiths that do milling in Northern VA or for any of the online shops like MapleLeap, DP or JagerWorks?

GCS10 gets you 10% off at Laserblade Engraving. You'll have to mail it in though since they're not in VA.

[Hostile]

GCS10 gets you 10% off at Laserblade Engraving. You'll have to mail it in though since they're not in VA.

Thanks for the suggestion.

[Hostile]

I ended up going with DP, got my parts back a couple months ago.





A few weeks back my FIL gave me a Mossberg 500A field model when I mentioned I was looking for a shotgun for the house. He got it for free from a friend of theirs after her husband passed.



I swapped out a few parts. The Magpul foreend didn’t fit, I had the shorter action tube. About 30 minutes with the dremel fixed that.

[Ape Factory]

Picked up a 365X Macro about a year ago, has a DPP recoil setup along with the Pro Ledge (really does work) and a Hogue grip. It's being replaced with my latest acquisition, an Langdon Tactical PX4CC. I just replaced the spurless hammer with a spurred match hammer in NP3. The PX4 is going to replace my 365X Macro as my carry gun. Comp is removable so I can roll with just the gun when needed. I actually shot well with the Sig but developed de Quervain's syndrome in my hands and the 365 aggravates the hell out of it. PX4 is next level in terms of recoil management and staying on target and fills my palm better. Might even like it better than my LTT Elite.

Trying out the Talon "pro" grip tape next before going with laser stippling on the PX4.



At the range comparing the two.

[Hostile]

Nice! The PX4 is supposed to be really good and Langdon Tactical knows them best.

[Ape Factory]

It definitely lives up to the hype. This is my second LTT, I have an Elite as well. In the midst of an NP3 conversion on it and will post photos when done.

[ericw.]

This one just came off the chopping block. Pic from when it was unfired. Ran 550 rounds through it to break it in last weekend.
Monsoon Tactical did the cerakote and "Dimebag" ports (10 ports)

[SilverStrider]

Is there a gun in that photo?

[Ape Factory]

Finished the NP3 (silver looking parts) conversion on my LTT Elite and also switched over to the match hammer. SA mode in this or the LTT PX4 is as good as the best 1911's out there. With the PX4, it's so flat shooting you never loose the dot/sight picture. There's no "return to target" as you never left! Makes me want the full size version as well.

The LTT's slide release is now a Volker Precision and the RDO is sporting a flash kill (overkill I know but it protects too) from One Hundred Concepts. If you haven't heard of them, really cool company and I use a ton of their products. Their scope and light caps are super functional, durable and just work better than normal caps. I can't live without their paracord QD mounts either.

[ericw.]

If you haven't heard of them, really cool company and I use a ton of their products. Their scope and light caps are super functional, durable and just work better than normal caps. I can't live without their paracord QD mounts either.

I have a bunch of their stuff also and they just shipped out my pre-orders on the AEMS kill flash.

Kill flash on the pistol though I always thought was interesting. Are you covering the light with tape or what's the solution to kill reflection off the WML reflector?

[Ape Factory]

I really just bought it for a bit of protection. I think they're really meant for guys running an LPVO or MPVO and an RDO for 1X on their rifles. I use their scope cap pro on both my PLxC's which has an integrated flash hider as well. So it only makes sense to have one on your RDO too, right?

The P415 has the scope cap pro, rear scope cap, the paracord QD and the ruggedized light cap for the Rein 3.0. Pro tip, the light cap does its job so well, if you accidentally hit the tape or tail switch, you don't know the light is on. I flip the cap off if it's not needed. Has this really weird texture/feel to it and it's very light. It feels recycled. Best way I can explain it but it doesn't make noise like the normal cap does when you flip it up.



It's expensive for what it is...when you start fitting all the bits to six or more rifles, the costs add up. Pretty sure I'm a "platinum" member now, LOL.

[ericw.]

I really just bought it for a bit of protection. I think they're really meant for guys running an LPVO or MPVO and an RDO for 1X on their rifles. I use their scope cap pro on both my PLxC's which has an integrated flash hider as well. So it only makes sense to have one on your RDO too, right?

The P415 has the scope cap pro, rear scope cap, the paracord QD and the ruggedized light cap for the Rein 3.0. Pro tip, the light cap does its job so well, if you accidentally hit the tape or tail switch, you don't know the light is on. I flip the cap off if it's not needed. Has this really weird texture/feel to it and it's very light. It feels recycled. Best way I can explain it but it doesn't make noise like the normal cap does when you flip it up.
[url=https://postimg.cc/Xp12Lctb][img]https://i.postimg.cc/vZbpQ0zc/IMG-5919.jpg[/im
[url=https://postimg.cc/wtsTPkqN][img]https://i.postimg.cc/wBwy1Wnw/IMG-5903.jpg[/mg

It's expensive for what it is...when you start fitting all the bits to six or more rifles, the costs add up. Pretty sure I'm a "platinum" member now, LOL.

I just acquired the ruggedized version for this one>> it's a big improvement over the standard light caps that I've used in the past. Been waiting on the AEMS kill flash to finish it off.


My mailman is probably getting sick of all the packages in my mailbox but I'm in another country for 20 more days. lol

[Ape Factory]

Nice! And I agree, the ruggedized version is better. They don't make the scope cap pro for a few scopes I have unfortunately but hopefully soon.

[Patrick303]

A couple new builds I just completed:

Stribog SP9A3S
Franklin Armory BFSIII trigger
A3 tactical folding brace
A3 tactical AFG
Sig Romeo5 on LaRue QD mount
+ a few upgraded internal bits




Masterpiece arms BA PMR Pro II
Tungsten chassis with polished barrel
Left hand bolt chambered in 300 PRC
Arken Optics EP-5 7-35x56 scope
Arken Optics rigid precision mount
LRA Send It level
Accu-Tac FC4 bipod
SilencerCo Hybrid 46

[raceshop147]

Ruger 1911 .45 ACP
Love this


Sent from my iPhone using Audizine Forum