Audizine - An Automotive Enthusiast Community

Results 1 to 24 of 24
  1. #1
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Suzuka Gray S8 after non-res milltek catback install *edit video added!

    Guest-only advertisement. Register or Log In now!








    thanks to Millaracing for the terrific install!
    unfortuantly i dont have any decent soundclips just yet...but for those of you who want to get an idea of what it sounds like just click here...
    http://www.youtube.com/watch?v=BgsYYBJpkzA


    behold the real video clip!
    http://www.youtube.com/watch?v=9kfXq5uXzAM
    Last edited by metalevon; 10-19-2008 at 09:02 AM.
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  2. #2
    Veteran Member Four Rings GFRRS3's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23157
    Location
    LI NY

    Re: Suzuka Gray S8 after non-res milltek catback install

    One of my favorite cars!!! Looks great...it must sound great now!!
    2017 - AUDI TTS
    2017 - PORSCHE 911 C2
    2019 - VOLVO XC60 R-DESIGN

    2021- AUDI A6 ALLROAD - SOLD
    2020 - AUDI RS3 - SOLD
    2006 - AUDI A3 - SOLD
    2005 - AUDI S4 - SOLD
    2004 - AUDI A4 USP AVANT - SOLD
    1999 - AUDI A4 AVANT GT28RS - SOLD

    IG- Greyfoxresearch

  3. #3
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Re: Suzuka Gray S8 after non-res milltek catback install

    it sure does! i can't even describe how good it sounds and i doubt a sound bit would even do it justice.
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  4. #4
    Established Member Two Rings
    Join Date
    Oct 31 2004
    AZ Member #
    3994
    Location
    SoCal

    Re: Suzuka Gray S8 after non-res milltek catback install

    Looking good :-) Suzuka Grey is sweet....

    Can you post a sound clips? I heard one on the milltek site. Sounds pretty decent. There was one of a S6 Avant that seemed to have a much deeper sound, but that may just be the recording device. What was the costs for the system if you don't mind me asking?



    Also looking at the pictures I noticed the tips seem a little off. They don't seem to line up perfectly. Is this normal?

    Thanks

  5. #5
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Quote Originally Posted by carsany View Post
    Looking good :-) Suzuka Grey is sweet....

    Can you post a sound clips? I heard one on the milltek site. Sounds pretty decent. There was one of a S6 Avant that seemed to have a much deeper sound, but that may just be the recording device. What was the costs for the system if you don't mind me asking?



    Also looking at the pictures I noticed the tips seem a little off. They don't seem to line up perfectly. Is this normal?

    Thanks
    this was a test fit for milltek we still have to do some final adjustments for the tips to line up correctly. the video on the milltek site is for the resonated version of the exhaust which literally sounds nothing like the non resonated version on our car. i will get some video clips up tomorrow.
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  6. #6
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Quote Originally Posted by zero View Post
    The first pictures like seem to enter on "Silent Hill" city,very obscure presence...:)

    Compliments to the photographer very very nice (half work made by the model obviously!).
    hehe thanks i am not a terribly good photographer, but i am quite proficient in photoshop.
    metal-levon.deviantart.com
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  7. #7
    Veteran Member Four Rings tike0rz's Avatar
    Join Date
    Apr 17 2007
    AZ Member #
    17364
    My Garage
    B8 A5
    Location
    NJ

    Re: Suzuka Gray S8 after non-res milltek catback install

    LOL at the T-rex sound clip. Beautiful S8. Is that yours?

  8. #8
    Established Member Two Rings utripn's Avatar
    Join Date
    Jul 13 2007
    AZ Member #
    19521
    My Garage
    2006 Audi A6 4.2 S-line
    Location
    Mission Viejo

    Re: Suzuka Gray S8 after non-res milltek catback install

    I LIKE!!!!!

  9. #9
    Registered User Four Rings OEMplus.com's Avatar
    Join Date
    Feb 27 2004
    AZ Member #
    950
    My Garage
    2x VW, 2x Audi
    Location
    OC, CA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Nice color!!

  10. #10
    Established Member Two Rings jonmiles's Avatar
    Join Date
    Sep 25 2006
    AZ Member #
    11994
    Location
    P

    Re: Suzuka Gray S8 after non-res milltek catback install

    I have an errection.
    Audi Sales

  11. #11
    Veteran Member Three Rings Audi05s4's Avatar
    Join Date
    Oct 17 2006
    AZ Member #
    12658
    Location
    Hockessin, DE

    Re: Suzuka Gray S8 after non-res milltek catback install

    i love it
    daworldisyours.com/forum<----check it out!!!!

  12. #12
    Established Member Two Rings
    Join Date
    Oct 31 2004
    AZ Member #
    3994
    Location
    SoCal

    Re: Suzuka Gray S8 after non-res milltek catback install

    Contacted stratmosphere for some info. Price is reasonable and they are running a 20% off sale this week. Making me think hard here....

    Metalevon,
    Wanted to ask your opinion on the non resonated version you have. Is it loud all the time? Does the exhaust note hum into the interior? Don't want to wake up the whole neighborhood on my way home leaning towards resonated.?.?.? or......

    Barker.... Barker...... Barker......

    Any opinions Rich? The MTM is nice, but price wise and the tips protruding too far on the MTM is making the Milltek system look really attractive. Would you facilitate in the exhaust install if I go this route or maybe you can source the milltek and I will buy it from you instead??

  13. #13
    Registered User Four Rings OEMplus.com's Avatar
    Join Date
    Feb 27 2004
    AZ Member #
    950
    My Garage
    2x VW, 2x Audi
    Location
    OC, CA

    Re: Suzuka Gray S8 after non-res milltek catback install

    We are a Milltek reseller, so no problems if you'd rather go that route. We have the MTM system here (as I've reminded you 10,000 times) so we could even install both of them and let you decide on the look/sound you prefer...

  14. #14
    Established Member Two Rings
    Join Date
    Oct 31 2004
    AZ Member #
    3994
    Location
    SoCal

    Re: Suzuka Gray S8 after non-res milltek catback install

    Awesome Rich, I'll give u a call in a few.

    I am pretty sure I am going for the milltek. Price is reasonable and the major point for me is the flush mount tips. I spoke to Peter Ryckaert @ Stratmosphere and he confirmed that Metalevon's exhaust was done that way at his request and the shipping versions are designed to be flush with the car

  15. #15
    Registered User Four Rings OEMplus.com's Avatar
    Join Date
    Feb 27 2004
    AZ Member #
    950
    My Garage
    2x VW, 2x Audi
    Location
    OC, CA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Good to chat with you again Carsany! I sent over an email with the details and I think we're good to go once the car comes out of the dealer.

    BTW - The tips are slip-fit, so they can be adjusted to flush perfectly with the bumper.

  16. #16
    Veteran Member Four Rings JMRQuattro's Avatar
    Join Date
    Jul 04 2008
    AZ Member #
    30563
    Location
    Seattle, Washington

    Re: Suzuka Gray S8 after non-res milltek catback install

    haha nice t-rex clip. So basically you're saying that your car frightens other cars, tips over jeeps, and eats goats now that you have that exhaust? I must say, FTW!

  17. #17
    Established Member Two Rings
    Join Date
    Oct 31 2004
    AZ Member #
    3994
    Location
    SoCal

    Re: Suzuka Gray S8 after non-res milltek catback install

    Thanks OEMPL.US, Slip Fit Tips

    Metalevon, any chance you can get some good vids or soundclips up. Love to hear some more while I wait for mines to show up.

  18. #18
    Registered User Four Rings OEMplus.com's Avatar
    Join Date
    Feb 27 2004
    AZ Member #
    950
    My Garage
    2x VW, 2x Audi
    Location
    OC, CA

    Re: Suzuka Gray S8 after non-res milltek catback install

    LOL, just saw the clip. FTW indeed!

  19. #19
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Quote Originally Posted by carsany View Post
    Contacted stratmosphere for some info. Price is reasonable and they are running a 20% off sale this week. Making me think hard here....

    Metalevon,
    Wanted to ask your opinion on the non resonated version you have. Is it loud all the time? Does the exhaust note hum into the interior? Don't want to wake up the whole neighborhood on my way home leaning towards resonated.?.?.? or......
    i am sorry it took me so long to get back to you. i was in chicago over the weekend. For my taste, the car is still remarkably quiet when cruising around. with the windows up and the B&O on you wont even know its there unless you floor it. There is so much insulation that even with no driving music the exhaust is barely noticeable at cruising speeds. there is no where near the amount of hum i got from installing a non res milltek on my B7 s4 and i still found that very comfortable.
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  20. #20
    Established Member Two Rings
    Join Date
    Oct 31 2004
    AZ Member #
    3994
    Location
    SoCal

    Re: Suzuka Gray S8 after non-res milltek catback install

    Thanks for the response, that settles it for sure. Non - Resonated it is From the various clips I heard on the web, I wanted the non-resonated. I was just scared of the interior hum. Thanks Metalevon

    Cheers


  21. #21
    Veteran Member Four Rings highPSI-S4's Avatar
    Join Date
    Oct 31 2005
    AZ Member #
    8584
    My Garage
    19' RS5 Coupe, 22' Tiguan SEL R-line
    Location
    Ashburn

    Re: Suzuka Gray S8 after non-res milltek catback install

    Sounds sexy as hell.
    2019 Glacier White RS5 034 STG3 e85 ECU | 034 STG2 TCU | Uni Carbon intake/inlet | AWE Touring | 034 Downpipe | 034 RSB | ABT HAS | BC Forged KZ10 |
    - Instagram: @Sinister_rs5-

  22. #22
    Deactivated Two Rings
    Join Date
    Oct 14 2008
    AZ Member #
    34171
    Location
    Victor, NY

    Re: Suzuka Gray S8 after non-res milltek catback install

    I do have these in stock in both configurations. We always extend an offer to swap center sections to get you louder/more quiet if your initial choice needs a change. That's why we offer options. Let me know if you have any questions. Order line is Toll Free at 1.866.533.1777. -Pete

  23. #23
    Senior Member Two Rings metalevon's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18243
    My Garage
    2012 Dodge Challenger 392
    Location
    Bryn Mawr, PA

    Re: Suzuka Gray S8 after non-res milltek catback install

    Quote Originally Posted by zero View Post
    Can be very interesting to konw wich model of camera used for this nice pics.
    I'm every time in trouble for the quality of my pictures.

    Obviously 100% caused for my "Big Experience"...but a little doubt for the tech resource...mmmm....
    i just used my point and shoot nikon "coolpix p500" with some photoshop afterward.
    2012 Dodge Challenger SRT8 392 6mt / 1995 Chevy Silverado K2500 turbo diesel
    GONE 2009 S5
    Audi Exclusive Suzuka Gray Pearl Magma RedCarbon Fiber
    current mods...
    H&R Sport Springs
    35% tint, Euro Lights, Milltek Non-Res Catback
    For sale!!!20" Modular Concept Carbon Wheels, Brembo GT Kit, LED Fogs & full LED interior, RS4 Pedals, REVO Tune, Gloss black grill, fog housings, rear valence and window trim.

  24. #24
    Established Member Two Rings anpk05's Avatar
    Join Date
    Aug 29 2008
    AZ Member #
    32503
    My Garage
    2005 A6 4.2L S-Line/
    Location
    Long Beach, CA (562)

    Re: Suzuka Gray S8 after non-res milltek catback install

    That's badass!!!!!!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.