Help with C6 A6 Wheel Fitment

[houstoned]

howdy. i just registered here and would like to say hi to everyone.

my buddy has a 2005 C6 A6 and he is lookin to upgrade to 20" wheels. i'm a complete noob when it comes to audi's so i'm hopin u guys could point us in the right direction. he wants a 20" wheel that will fit nice and flush. if anyone could help us out by tellin us whats a good wheel size and offset to do the job. he is lookin to spend $2000.

any help would be really really appreciated. thanks in advance guys.

[fritzner]

welcome..

you can check this page for links to some useful sites.. but specifically try here to figure out what offset your current wheels are..

http://www.myturbodiesel.com/1000q_h...audi_5x112.htm

i believe C6 A6's are around +48.. you can also call the parts department at the dealership..

you can usually go about 10mm or so, which you puts you around +38.. do not take my word, double check with the wheel manufacturer/distributor..

check the advertiser's section for wheel distributors, but to name a few VMR (Velocity Motoring), Achtun!ng (Hartmann wheels), Alloys-R-Us, etc..

happy shopping!

[houstoned]

welcome..

you can check this page for links to some useful sites.. but specifically try here to figure out what offset your current wheels are..

http://www.myturbodiesel.com/1000q_h...audi_5x112.htm

i believe C6 A6's are around +48.. you can also call the parts department at the dealership..

you can usually go about 10mm or so, which you puts you around +38.. do not take my word, double check with the wheel manufacturer/distributor..

check the advertiser's section for wheel distributors, but to name a few VMR (Velocity Motoring), Achtun!ng (Hartmann wheels), Alloys-R-Us, etc..

happy shopping!

yay! my first reply =P

thanks for the info. i was lookin for a specific offset range that was safe, but still offered a flush fitment. could anyone give me a hint? we might be pickin up some NC Forged rims, so i want to make sure the offsets are all good.

also, could anyone recommend some nice companies that offer wheels for about $2000 for 20's?

[Doc@tirerack]

Biggest we do is 19x9.5 At Italia Propeller (polished aluminum) with 2.75" lip @ $ 149 on closeout ! 19's and especially 20's will take a lot of comfort out of the ride, and make him more vulnerable to sidewall bubbles if road conditions are poor.

http://www.tirerack.com/wheels/Wheel...Super+Polished