what what!?

[t1demont1]

It runs again... finally lol first starts with the head... start #1 was a bit rough idle, and eventually shut off on me, but start 2 was nice and idled until I turned her off lol http://www.youtube.com/watch?v=oTEkkg7m8F0

[7speed]

congrats

[SilverB7FL]

nice, now get her out on the rd!

[jstdoit1112]

sweeeeeeeeeeeeet video !!

[RebelS4]

congrats man. been watching this build hope to see/hear it one day.

[t1demont1]

yeah, im gonna put some miles on her today. Before the cam sprocket broke, causing a s-load of problems. but shes up and ready to roll

[LanEvo9MR]

Can't wait to see that out at the track!

[t1demont1]

cant wait to see you out at the track ;)

[LanEvo9MR]

cant wait to see you out at the track ;)

Lol! I spent 30 bucks going last week. And I might be in a slower car next time I'm out. Thinking about trading mine in for a X

[bwoy1981]

I would hate you!!!^^^^^ lol.. Brandon when u gonna put your exhaust on? Driving open downpipe is gonna get you a bit too much attention! Haha!

[t1demont1]

I neeed to get exhuast made first lol

[SilverB7FL]

Lol! I spent 30 bucks going last week. And I might be in a slower car next time I'm out. Thinking about trading mine in for a X

you should sell it privately....prob get more then what the stealership would give ya....

everybody loves an evo

[A4ringedONE8T]

I neeed to get exhuast made first lol

Do you have someone that is doing the exhaust for you?

[t1demont1]

not really lol. A guy out in bithlo said he can do a full mandrel bent 3" exhaust for me, but then again thats the same guy who attempted to fix my head the first time lol. You know anyone that does mandrel bent exhaust for a decent price?

[A4ringedONE8T]

not really lol. A guy out in bithlo said he can do a full mandrel bent 3" exhaust for me, but then again thats the same guy who attempted to fix my head the first time lol. You know anyone that does mandrel bent exhaust for a decent price?

We can do it but you would have to bring the car down here. Do you have a correct downpipe already?

I just redid my exhaust last week





Another one we did a few months ago

[t1demont1]

yeah man i have my downpipe so i can drive the car. Would you guys be able to do my dump tube as well?

[A4ringedONE8T]

yeah man i have my downpipe so i can drive the car. Would you guys be able to do my dump tube as well?

Sure, you want it recirced or just dumped under the car?

[t1demont1]

dump under the car

[t1demont1]

drove the car today ;) Wastegate is loose im pretty sure... 0 boost when i flored it lol and it was hot as shit around the wastegate.

[LanEvo9MR]

you should sell it privately....prob get more then what the stealership would give ya....

everybody loves an evo

Hmm odds seem that I'll be keeping it. Would take forever to sell it privately with the economy the way it is. And although I could get a X, my monthly payments would be about the same. Not worth it considering how much I've put into the 9 already.

Ah well, guess I'll keep modding my IX and hope the tranny holds up atleast 2 more years.

[SilverB7FL]

pssh i wouldve bought it if I wouldnt have already gotten my Z and I'm sure I could've given ya more for it then the stealership wouldve if you ever want to sell it let me know, my b/f wants an evo

[t1demont1]

So whens a good day for me to go to you guys shawn?

btw: test fitting bumper

[A4ringedONE8T]

Do you want to use Aluminized steel or SS? Do you have a muffler or do you need one? Vband or 3 bolt flanged? Tips? Enough questions?

[A4ringedONE8T]

drove the car today ;) Wastegate is loose im pretty sure... 0 boost when i flored it lol and it was hot as shit around the wastegate.

Your supposed to tighten everything before you start it

[t1demont1]

Do you want to use Aluminized steel or SS? Do you have a muffler or do you need one? Vband or 3 bolt flanged? Tips? Enough questions?

Which one sounds better? which ones lighter? which one cost more? I wanna vband at the bottom of my downpipe. I have resinators and will probably just run that right now and maybe get an s4 muffler later on. Probably no tips.

[t1demont1]

Your supposed to tighten everything before you start it

I thought i tightened it when I had the manifold off. Guess its just one of those things that slipped my mind.

[A4ringedONE8T]

Which one sounds better? which ones lighter? which one cost more? I wanna vband at the bottom of my downpipe. I have resinators and will probably just run that right now and maybe get an s4 muffler later on. Probably no tips.

Weight wise both are the same. Stainless is stainless, wont rust, ever ... Aluminized steel is cheaper but it is steel and will rust over time.

You providing whatever resonators and mufflers you want, SS pipe with a vband at the downpipe and one near the rear around $400 for materials. Using the steel, materials would be around $300. Labor for either $300

[t1demont1]

Weight wise both are the same. Stainless is stainless, wont rust, ever ... Aluminized steel is cheaper but it is steel and will rust over time.

You providing whatever resonators and mufflers you want, SS pipe with a vband at the downpipe and one near the rear around $400 for materials. Using the steel, materials would be around $300. Labor for either $300

I dont need a vband at the rear. 700 bucks for a straight pipe with vband? b5 is single exit if that helps at all? Ive got a spare vband clamp, just not the flanges if that helps drop the price at all lol.

[A4ringedONE8T]

I dont need a vband at the rear.

You need some type of flange/seperation. You can use a 3bolt flange as well but two flanges are about 20 bucks or a vband clamp and flanges are 35 bucks and a hell of alot easier

[t1demont1]

alright, another vband at the rear it is.

[A4ringedONE8T]

alright, another vband at the rear it is.

You got PM

[t1demont1]

WAAAAAA BOom, the sound of a intercooler pipe shooting off my car at 5k in 3rd. Literally, it removed itself from both coupligns and proceded to move itself to the sidewalk. Damn this car feels like a beast :D fastest thing ive ever driven for sure, even on the 14lb wastegate spring

[A4ringedONE8T]

Glad she's up and running well And I know the feeling, I still pop off intercooler pipes time to time and it still scares the hell out of me each time!