A5 with VMR wheels? Any pics

**WillF** · 10-01-2008 08:02 AM

I'm starting to look for a winter set, and didn't want to spend too much. So forged wheels are out of the question. I've seen VMR wheels pics floating around these forums but haven't seen any pics on an a5.

Anyone have pics? or recommendations for different wheels? I'm open to suggestions :)

Thanks guys

**VMRWheels** · 10-01-2008 12:17 PM

A5's have a 66.5 center bore which we dont offer. You can bore out the center from a 57.1 to a 66.5 We've had a few customers do it without a problem.

-Charles@VMRWheels
www.vmrwheels.com

**A4B888** · 10-06-2008 09:30 PM

CHARLES: don't you guys at VMR sell a RS4 Rep wheel (V708) with a 72.6mm center bore? if so why cant you just use a hubcentric ring 72.6mm > 66.5mm? why go the hard route and machine ("bore out") a wheel?

http://www.velocitymotoring.com/links/wheels_v708.htm

**swaigo** · 10-06-2008 09:36 PM

um yeah, why not just get rings?

**VMRWheels** · 10-07-2008 05:27 PM

Response to both your posts,

We offer the 72.6 center bore for BMW 5x120 fitment, unfortunately not 5x112 fitment.

Thanks,

-Charles@VMRWheels
www.vmrwheels.com

**A4B888** · 10-10-2008 11:53 AM

Originally Posted by VMRWheels

Response to both your posts,

We offer the 72.6 center bore for BMW 5x120 fitment, unfortunately not 5x112 fitment.

Thats not a good thing...Booooooo

**VMRWheels** · 10-10-2008 04:18 PM

Hi,

I just wanted to let everyone know we are now offering center bore services for B8 customers with 66.6 center bore. The machining service will only be an additional $40 for a set of wheels. Please let me know if you are still interested.

Thanks,

-Charles@VMRWheels
www.vmrwheels.com

**Omeletpants** · 11-01-2009 10:13 AM

Originally Posted by VMRWheels

Hi,

I just wanted to let everyone know we are now offering center bore services for B8 customers with 66.6 center bore. The machining service will only be an additional $40 for a set of wheels. Please let me know if you are still interested.

Thanks,

-Charles@VMRWheels
www.vmrwheels.com

How about A5 customers?

**toothysaw2** · 11-01-2009 04:31 PM

^ A5 is on the B8 platform. so yes for A5.

**VMRWheels** · 11-02-2009 11:29 AM

Unfortunately we no longer offer machining services at this moment. We do however, offer the v708 with a 66.6 centerbore direct from the factory with a planned staggered release of all our models in that fitment.

Here's a pic for the OP