Audizine - An Automotive Enthusiast Community

Results 1 to 2 of 2
  1. #1
    Veteran Member Four Rings coowhip's Avatar
    Join Date
    May 11 2008
    AZ Member #
    28641
    Location
    Columbus, OH

    Winshield washer problem

    Guest-only advertisement. Register or Log In now!
    So I can hear the motor for the washer fluid but nothing comes out. It started as a trickle on the drivers side and has now come to a drip if that. I've filled it several times and am wondering what the issue is? Clog? Anyone have any diagrams or pics of the hose lines or anything that would be of help? I also don't think my headlight washers work either.

  2. #2
    Veteran Member Three Rings cjonesgo's Avatar
    Join Date
    May 22 2007
    AZ Member #
    18238
    My Garage
    02 A4 Avant 1.8t qm, '74 Vespa
    Location
    oakland ca

    Re: Winshield washer problem

    It certainly could be clogged, but more likely one of the lines has become disconnected.
    You mentioned needing to fill it, so that fluid is going somewhere...

    If you hear the motor and think it is pumping it may just be a line between the motor and the nozzles. I have not seen a diagram, but most everything is visible/accessible once you get under the car. Driver side wheel well cover may need to be removed to gain further access.

    Headlight washers only spray if the headlights are on.
    [CENTER]02 A4 Avant 1.8tqm Dolphin Gray
    Blackout Grills | S4 Bi-Xenons | 3.0 Brakes | RS4 Rear Swaybar | Bilstein Sport Shocks
    K04 | REVO | TT225 Injectors | Apikol SMIC | 034 HFC |

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.