Ever see these on a b6?

[JMVant]

Thinking I may be the first if I can get them to fit my b6 avant...



Name: Helios
Manufacturer: Borbet
Size: 19x8,5
Offset: ET45
Bolt Pattern: 5x112

What do you think? Will they fit with a 10mm spacer?

[Maverick]

no, haven't seen it at least in my area.

VMR V710 looks much better than this, same style basically

[A4ringedONE8T]

They should fit over stock brakes even without a spacer. Not the best design IMO for our cars though

[JMVant]

They should fit over stock brakes even without a spacer. Not the best design IMO for our cars though

ET is a bit high, think will rub without the spacer

[Maverick]

if the offset is too high, it will not rub, you simply can't mount them on.
but the spoke design of this wheel looks alright.

if your budget for wheels only is under 1K, you can consider buying wheels from Alloy R us or VMR. they have good stuff for cheap.

[JMVant]

if the offset is too high, it will not rub, you simply can't mount them on.
but the spoke design of this wheel looks alright.

if your budget for wheels only is under 1K, you can consider buying wheels from Alloy R us or VMR. they have good stuff for cheap.

Yeah VMR's are hot but I picked up 5 of these before they were out. (dam expensive) Just no time to mount... will run them next season or find a vortexer to take them and get the vmr's.

[A4ringedONE8T]

ET is a bit high, think will rub without the spacer

No, they will fit

My S4 wheels are 18x8 et45 with 235/40/18 and dont rub one bit ... and clear 355mm Stasis/Alcon fronts and 305mm Stasis rears without a spacer

[michgo]

Are those helios? Yikes... Stick to vw with those.

[B6Lovin]

^if they're 19's i think they might look decent. he'll just need the rest of the car to go with it... it'll take a very subtle, "round" kind of look to pull those off. they're not the most attractive wheel ever IMO, but if done properly I think it'll give a very VERY definitive look to his car and make it stand out. and in the car world there's really nothing better than that

[VMRWheels]

VMR 19x8.5 +35 V710 in Hyper Silver

-Charles@VMRWheels
www.vmrwheels.com

[El_Chapusca]

VMR 19x8.5 +35 V710 in Hyper Silver

-Charles@VMRWheels
www.vmrwheels.com

^^^^= SEXY

[mister_tu]

They should fit over stock brakes even without a spacer. Not the best design IMO for our cars though

And I trust that opinion.

[JMVant]

Thanks guys will post pics after I have them on the car, if no spacer is needed I may try this weekend.

Charles I will prob run these for 1 season and pick up the v710's after some vortexer takes them off my hands.

[manhertm]

ditch the Borbets, here's the reason why.................
By manhertm, shot with E-500 at 2008-10-01

[outkasta4]

http://forums.vwvortex.com/zerothread?id=4002830 They are pretty nice A jetta right down the street has some they look clean

[SICCHEF1.8t]

A friend of mine has them on his MKV GTI...they look really good on his car but they have some crazy curb rash. With the 19's, your going to have some poke which leaves you more prone to rash. But then again I have never seen them on our cars so it could be a little different. Just dont want to see you get them and have them chewed up in the first week

[a4darkness]

Damn it Charles, stop it. Please. God I love those wheels. ;-]

[VMRWheels]

So what are you waiting for?

[a4darkness]

My portfolio to get out of surgery. ;-]

[A4 KiDD 810]

My portfolio to get out of surgery. ;-]

lmao i hear ya on that one

[gotdubd]

With the 19's, your going to have some poke which leaves you more prone to rash.

WAT?

diameter of the wheel has nothing to do with how much poke you have.

width and offset do.

19x8 et 45 or whatever these are will need a spacer on them so they dont look sunken into the fenderwells, if anything at all

[JMVant]

Hearing I won't need spacer but have a set of 4 10mm sitting on side just incase. Will mount this weekend if weather is nice...