DYNO DAY @ 034Motorsport, Fremont, CA - Saturday 9/27

[Dan@034]

Dyno Day @ 034Motorsport





Saturday, September 27th, From noon until the sun goes down, our All-wheel drive chassis Dyno will be at your disposal for baseline pulls and tuning. We will be offering significantly discounted rates of $60 for baseline sessions (3 pull maximum) as well as discounted chip tuning upgrades provided by UNITRONIC.


It is a bit last minute notice, but figured it would be a great opportunity for the local community to stop in and get acquainted with our facility, products, service, and staff!




If you have been following our A4 VR6T Time Attack project, it has recently been upgraded from a 640whp 12v VR6 engine to a GT42R equipped 24V VR6 targeting over 1000hp to the wheels!! It will be strapped down for an exhibition run right at noon time to kick off the days events. Be the first to witness the revisions and tuning concepts before departing for the 2008 EuroTuner GP. Don't be late!






Dyno time sign up will be on a 'First Come First Served' basis. We'll do our best to ensure everyone who wants a turn, will get one.


CLICK FOR MAP


Please spread the word, all vehicle makes and models are welcome. I look forward to seeing you all there!



.

[Anthony]

Very cool, Dan! Thanks for offering this and for posting this up. And make sure you fix the date in the body of your post to match that of the title.

[dino]

Great! What time do you think I should drop by to sign up for early afternoon pulls?

[Ado]

count me in. ill come by after work around 4:30-4:45ish.

[mnkyA4]

Count me on for some Dyno pulls as well. I want to get a baseline for my B6

[awd2ks4]

Sounds cool, id love to get a baseline for my S4. When do we need to be there to see that 1000whp dyno run? right at 12:00? I never dyno'd before, so do you guys dyno it or do let the owner do it?

[papuc14369]

ok this is a stretch but can i get a rain check, i am going out of town for business this weekend and would have loved to come get my car dynoed. either that or you guys can set up another dyno day just for me :-)

[kidzero]

this is awesome :)

thanks for the great offer dan. I will see you saturday!

[Dan@034]

Great! What time do you think I should drop by to sign up for early afternoon pulls?

Please try to come as close to noon as possible, earlier the better to get on the signup sheet. (Not before noon please, unless you want to help us clean the shop! haha)

I never dyno'd before, so do you guys dyno it or do let the owner do it?

We take care of it all for you We will also be providing Dyno Graph printouts, and can even email you a .pdf copy if you'd like.

either that or you guys can set up another dyno day just for me :-)

During regular business hours, it is a service we offer. Please call us when you would like to schedule an appointment, and we'll be happy to have you, or anyone here for baseline runs, or a custom tuning session.


Enjoy!

[papuc14369]

How much do you charge regularly?

[034Motorsport]

How much do you charge regularly?

Our regular price is $125/hr or $100 for 3 pulls

[AudiRob]

how much for A4 B6 chip upgrade that day?

[Rau]

hey dan, ill swing by and watch. gotta fix my oil leak and replace the snail before i get my chip

[Dan@034]

how much for A4 B6 chip upgrade that day?

You'll have to come by to find out

It's not free, but I can assure you will not be disappointed.

[mnkyA4]

You'll have to come by to find out

It's not free, but I can assure you will not be disappointed.

Looks like I'll be going Stage 1 this day, hahaha.

[a4wd]

Ive PMed you guys before, but how much for an intercooler install?

[034Motorsport]

Ive PMed you guys before, but how much for an intercooler install?

PM replied

[20vpower]

i definatly want to try to come out. ill see if i can make it

[Wizard-of-OD]

Bump it up!

[speedydragon]

hmm would you all have time to install a forge dv tomorrow? :D thanks!

[Anthony]

Bump it up!

You planning on being there, Issam?

[AudiRob]

Dan / Issam .. i will be there tomorrow for chip upgrade. btw can we swing by before noon?

[akitamike]

Dan, I sent you a PM just now.

[AudiRob]

OMW to 034 .. see u guys there

[ActiveMonkey]

I might just have to take my truck there and see what it runs.... Too bad i just filled up with 87. i dunno, i'd want to make a run with the 93 octane file.

[sixfiveoh]

Good seeing a couple of you guys today, big ups to 034 for the hot dogs and good time

[034Motorsport]

Good seeing a couple of you guys today, big ups to 034 for the hot dogs and good time

It was a good time! I just got home a little while ago, and what a great day! Overall we dyno'd almost 20 cars ranging from 150whp to 430whp. The morning started out with a slew of B5 and B6 1.8t's, some tune better than others. It was my goal today to speak with each dyno'er and help them evaluate their tune; if the power seemed in range, if the AFR's were safe and what they could do to improve it if need be.

We did a number of Uni tunes as well, we were able to help one customer with a Stage 1 S4 running GIAC tuning to gain 50 ft/lbs TQ and 20 wheel HP by doing a custom Uni tune on his car! His AFR's were also dangerously lean, now he's running perfect AFR's under light load and boost, results like this is why we do what we do

We also ran our Time Attack A4 R32 for an enthusiastic crowd as well, hopefully some will post videos, there were plenty of cameras.

We'll be doing another dyno day like this soon, so stay tuned, we had so much fun and such good results that all the staff are excited to do another day soon

[AudiRob]

Nice meeting everyone .. thanks for putting this together 034 Crew!!!

i say Chip upgrade unitronics is a must!!! i am pleased with the gains. Can you guys custom tune mine?

[mnkyA4]

Thanks 034 for hosting this last minute Dyno Day. I unfortunately didn't get my car dyno'd but I will hopefully this year to get a baseline of my stock avant.

034: I'll probably be in contact with you within the the next month or so to find out about custom tuning and rebuilding a Sk04 if possible to get the most out of it among other things. Any suggestions on what internal parts i can use besides the normal K04 tubines? PM if you feel more comfortable with your response.

Jonah

[dannyj777]

Hey Dan,
Sorry I wasn't able to run. I tried to call the shop, but your machine just repeated the message prompt and I couldn't leave a message. Anyways, we had to rush to Oakland Honda to pick up the van being serviced. Hope to work with you guys soon. Thanks for a great event. Great facility.

[20vpower]

Thanks 034 for hosting this, it was great to get a dyno and check out all the great custom builds you guess are capable of. Really I have no idea what to expect next seeing all the potential this company has.

[Wizard-of-OD]

There might be another Dyno day in the middle of october.I will be flying in for this so if you want to come down...come down

[Anthony]

Thanks again, 034. A good time was had by all!

[Das General]

What did the time attack car dyno?

[Jayco88]

What did the time attack car dyno?

5 hundred something, they said it was a track tune... it was a pretty loud beast ... saturday was awesome. nice seeing you all.

[034Motorsport]

5 hundred something, they said it was a track tune... it was a pretty loud beast ... saturday was awesome. nice seeing you all.

Yea, just the "widdow" GT35R turbo tune, it was a 25psi tune for about 530whp

[Anthony]

Yea, just the "widdow" GT35R turbo tune, it was a 25psi tune for about 530whp

I think my ears are still ringing...man that sucker sounded mean as hell!

[ms4cd]

Good seeing everyone again, very happy with my results...

[simona]

Will there be another one, had to go to traffic school that Sat.

[sixfiveoh]

Will we be receiving the dyno graphs in our email, or how does this work?