!!! GSG Motorsports CAI is in production !!!

[GhostSquadGarage]

Completely tested to my fullest standards and I sent the finalized prototype out for production today !
The sound is absolutely AMAZING !!!
The gains have been minimal per graphical data but the booty dyno don't lie !
MUCH improved throttle response and combined with the FMIC this thing feels like it got chipped all over again.

Our CAI will ONLY work with a FMIC installed.
The SMIC's will not support the design and in lieu of this we will be offering our FMIC at a more than reasonable price if you want to pickup the combo of both.
Also ATP is selling their FMIC for a great price as well, I believe around $750-$790 at different places. We will offer ours in the same ballpark for a limited time should you decide to pick it up as well.

I will have vids up tonight once I get done with some other projects.
Just keeping you guys updated !! This is the best thing I've made to date.

SOUNDCLIP VID - http://www.youtube.com/watch?v=avH_-FofP88

[johntesi]

Winnar winnar! Dyno plots? Looking forward to more explaination, in particular why an FMIC is a neccessity.

[Sanjman]

you said... a FMIC installed... so you're saying any FMIC will work with your CAI?

[GhostSquadGarage]

Because this is not routed the same as the CAI's that every other company has made.
This is routed down so it will scoop in actual fresh air from the lower passenger grill.
It's also been tested in rain situations and I have it setup perfectly so the MAF is protected and there is no risk of anything getting wet.
The passenger SMIC would be in the way of the location, so if you're looking to stay with the stockers then our intake pipe is your best bet as of now.
Yes this will work with the other FMIC's, not just ours so you have the option to choose what you will as long as the smic is removed you're good to go !

The dyno only showed marginal gains but I will have to redyno it once the final product is in. For the prototype I use less quality materials than I would in the full production models so that will reflect changes.

Now taking preorders on these as well. I'm sure they'll go out of stock faster than the intake pipe did PM me or Laurence@gsg for more info on this.

[quattrosaint]

Completely tested to my fullest standards and I sent the finalized prototype out for production today !
The sound is absolutely AMAZING !!!
The gains have been minimal per graphical data but the booty dyno don't lie !
MUCH improved throttle response and combined with the FMIC this thing feels like it got chipped all over again.

Our CAI will ONLY work with a FMIC installed.
The SMIC's will not support the design and in lieu of this we will be offering our FMIC at a more than reasonable price if you want to pickup the combo of both.
Also ATP is selling their FMIC for a great price as well, I believe around $750-$790 at different places. We will offer ours in the same ballpark for a limited time should you decide to pick it up as well.

I will have vids up tonight once I get done with some other projects.
Just keeping you guys updated !! This is the best thing I've made to date.

Price? Wow this is the first time I am considering a "CAI'

[GhostSquadGarage]

I should have a price by the end of the week.
Have to wait to see what production cost is per the amount of units I'm having made.

[Quattro]

just a heads up, the intake is insane!!!

More torque, quicker acceleration and that was with running a cheesy intake filter and not the one they will be using for the kit.

In combination with the fmic, gains are great...trust me =D

[GhostSquadGarage]

Vidz0r !!!

[Quattro]

works

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

[quattrosaint]

Vidz0r !!!

Sounds awesome. Is that with a DV instead of a BOV? Thanks.

[Quattro]

CAI + stock dv =D

[Alkemix]

Damn, would you say the DV and the induction noises are more audible with your CAI? That DV noise sounded like it could set off alarms.

[quattrosaint]

CAI + stock dv =D

thats sick, I bet it would sound even better with my Forge DV.

[Quattro]

Damn, would you say the DV and the induction noises are more audible with your CAI? That DV noise sounded like it could set off alarms.

The sound is a bit more noticeable, but not extreme of setting off alarms. If you are running an intake now, its basically the same sound with a bit louder woosh

[Phrost]

The growl/whoosh should be louder than any cole filter/short ram. The sound resonates down the tube to make it louder I guess, but engines have always been louder with a CAI (in a good way). Sounds sweet

[agkellyboy]

This could finally be the real 'cold air' intake I've been looking for. Hope to god it fits w/ the AWE FMIC

[Quattro]

^^ it should, should have no clearance problems =)

[mhjon2001]

I can't wait for pic's + dyno results. I've been debating about getting rid of my Carbonio recently.

[supamannn99]

finally, an intake that's actually outside of the engine bay.

[Quattro]

my evoms going out the door =D

[INTEGRATION]

Dang Jordan, your company is making some really sick stuff for our car! I love it!

[GhostSquadGarage]

Loving the response !!
The sound is definately more noticeable. I couldn't believe it at 1st either that it was still the stock DV, but since we all know Randy's car is pretty much all stock you can't argue with that The whoosh is even better than the intake pipe. I guess the only drawback (if you can even call it that) is it will only fit with a FMIC. More reason to mod right ?
How about 2 pics to get you guys more excited ?
This took a WHILE to get right, where the design was actually improving airflow and pulling in the correct amount as well. You have no idea the amount of welding and testing and rewelding and rebuilding and structuring this fluid curve took.
Obviously the production piece will look a billion times better than this and the filter will be way better and more effecient than the crap that's on there.

Just look at the room you're going to have where the old stock box used to be. I'm trying to think of ideas to spice up that area as well but it looks pretty sweet just being empty IMO. I'm very much a minimalist mindset to begin with.

[supamannn99]

It looks good! I hope you sell this at a reasonable price. Everything else in the market is already ridiculously overpriced.

omg randy don't tell me this is your car. and that's the greddy fmic you were supposed to sell.

[vtracer20]

dyno + temp logs + price please

[CardNation]

Sounds amazing, hopefully the price will be reasonable!

[GhostSquadGarage]

It looks good! I hope you sell this at a reasonable price. Everything else in the market is already ridiculously overpriced.

omg randy don't tell me this is your car. and that's the greddy fmic you were supposed to sell.

I will definately be releasing this at a great introductory price for you guys !

That's the GSG FMIC, not Greddy. We're not bankrupt just yet
I don't remember if that is Randy's car or not. I don't think it can be since he's still stock

[eastwick897]

I'm liken it

[virgsa4]

I can't wait for pic's + dyno results. I've been debating about getting rid of my Carbonio recently.

I could probably take the carboio off your hands for you

[vtracer20]

I will definately be releasing this at a great introductory price for you guys !

That's the GSG FMIC, not Greddy. We're not bankrupt just yet
I don't remember if that is Randy's car or not. I don't think it can be since he's still stock

Please provide dyno results + tempature logs + price, thanks. Also your vid sucks no offense, just way too much noise, if you could please do another one maybe on the outside. dont take offense to my comments.

[vtracer20]

okay sorry, i played it with headphones and the sound was better....

[supamannn99]

it sounds so nice. i've played it over 5 times already LOL. sounds like an aftermarket BOV

[GhostSquadGarage]

okay sorry, i played it with headphones and the sound was better....

Got these laptop speakers ?? hahahha
I'll get more factual data once the production models have arrived since the elements change with the better quality build and smoother design.

[vtracer20]

sounds good keep us posted

[reggaemylitis]

Looking forward to seeing more from this product! I've been delaying any kind of CAI purchase too. Sounds money so far!

[Quattro]

hey jordan, are you anti christ? Just asking LOL

the sound, is very nice. I love it

[quattshot]

You could easily powder coat the piping textured black or satin black.
You could also fabricate a nice aluminum panel that will close off that open space with the tube running thru it.
I work for one of the largest powder coaters in S.Florida.
We are coating some BMW intakes in textured black. It gives it a completely OEM look.

[RedS-line]

looks awesome! unfortunately if it requires a fmic then im out. well at least i can always just pick up the intake tube...its on my list.

[jmars]

Yeah, bumming about the FMIC. I really didn't want to get one yet but I guess I'll have to just wait longer now.

Nice work GSG! Glad someone took the B7 raines

[4 black rings]

I think that is on there website for $289.00 but i could be wrong!

[GhostSquadGarage]

^^^The Turbo Inlet Pipe is, yes. (aka intake pipe)