First software for the new 2.0 TSi available from Revo Technik
September 18, 2008 - Revo Developments Head Office, UK



Revo Technik is pleased to announce the release of Stage 1 performance software for the 2.0 TSi (CCTA and CBFA engines) on the 2008+ Audi A3 and Volkswagen Passat in North America. This first-to-market product is fully switchable between Stock and 91, 93 and 100 Octane performance programs*.

The Revo 93 Octane performance program for the 2.0 TSi delivers an increase over stock of 35 to 45 peak horsepower with the new peak horsepower arriving at 5,400 rpm, and torque gains of 80 to 90 lb-ft between 3,200 and 4,400 rpm (flywheel). The stock 200km/h (124mph) speed limiter is removed and the rev limit is set to 7,200 rpm.

The Revo Technik team has gone through extensive testing to deliver performance software that gives you massively increased power throughout the rev range and phenomenal torque. The 2.0 TSI engine combined with performance software whether in 91, 93 or 100 octane mode is extremely flexible, having even more torque than the earlier 2.0 TFSI whilst providing factory smooth power all the way from idle through to redline. Pick up from low rpm in any gear is amazing; the increase in speed is deceptively rapid. It's the immense area under the power curve that transforms the vehicle far more than even the strong peak figures might suggest!



The dynograph [below] gives a good indication of the gains that can be expected from this new release. The area between the stock and Revo curves hints at the new character of the engine after Revo software is installed.



Please note that these results are measured at the wheels!

Not convinced yet? Why not take advantage of the 30 day money back guarantee? Revo Technik promises that you will be very happy with the software or you can have the software removed and your money back. There is no better way to try it out on your own car!

This new performance software for the 2.0 TSi is available for $499.00 in the USA.

The team at Revo Technik is continuing to develop the 2.0TSi tuning for other vehicles with this engine. Further information on these, and Stage 2 software will be released in the coming weeks.

To locate your nearest dealer and for more information on 2.0TSi products check online at www.revotechnik.com

* Please note: Revo Technik Select Plus switch is required to access stock and all three of the switchable performance programs. The standard Select switch will give access to Stock and one Performance program. Both the Select and the Select Plus switches are sold separately from Revo Technik software.

Revo Technik
UK, EMEA, ASIA, OCEANIA
[email protected]
www.revotechnik.com

Revo Technik
Americas
[email protected]
www.revotechnik.com

Background
Revo Technik is a world leader in automotive performance engine tuning software, specialising in Audi, SEAT, Skoda, Porsche and Volkswagen vehicles.

Revo Technik operates out of 21 countries worldwide and has a network of over 300 Authorised Tuning Centres worldwide. Its key markets include UK, North America, Europe, Japan, and Australia.

Revo Technik tuning software is designed to enhance the qualities of a vehicle and engine in many ways. Power, torque, responsiveness and flexibility are all improved whilst delivering a smooth, reliable and economic performance … pure drivability! This approach to tuning is delivered consistently across the entire product range. Performance is optimised for real conditions, working with the original vehicle systems and within the factory protection mechanisms. The Revo Technik tuning is flexible allowing boost, fuelling, timing and throttle to be adjusted depending on the vehicle model, fuel type and the drivers own requirements. The software is uploaded to the vehicles ECU via the OBDII port using the Revo Serial Port Programmer Cable (SPP) In the majority of cases the ECU does not need to be removed. The ECU is not physically modified in any way.