where is everyone mounting their water/meth

[PinoyS4]

where are you guys mounting your w/i pump at? next to the abs module? can someone please post pics if possible? thanks in advance

[2ndEngineS4]

damn you.

[PinoyS4]

he he.. it' on

[HeveyS4]

[PinoyS4]

^^^^perfect. exact spot i was thinking of putting it at. that's exactly what i was looking for. thanks

[s vier]

can't! 2000

[bassed]

^^^^perfect. exact spot i was thinking of putting it at. that's exactly what i was looking for. thanks

VERY bad place for the pump and it's longevity. You want the pump below or level with the pick up in the collection tank. I'll snap some pictures tomorrow of my setup. I have the controller in the engine bay with the pump and tank trunk mounted.

[BITRBO]

do I see B.O.V.'s??

I do like the very ninja placement of the pump controller in the cabin light though

[BurnAll4S4]

what kit is this?

[Meddie600RR]

Underneath the tank.


Fits perfectly with custom bracket.

[HeveyS4]

VERY bad place for the pump and it's longevity. You want the pump below or level with the pick up in the collection tank. I'll snap some pictures tomorrow of my setup. I have the controller in the engine bay with the pump and tank trunk mounted.

I thought that as well after i installed it, and was going to move it because i didn't think it stayed primed. I was about to take it out and move it but then realized that the check valve keeps it primed. so its just fine like that, there is always meth/water primed to the pump. You can see from where i put my fuel filter to keep crap out of the pump and jets.

[JDM EJ1 95]

i put mine between my intercooler and the fender brace. on the driver sside

[ms4cd]

How about you hold it in your hand while you drive!

[bassed]

Underneath the tank.


Fits perfectly with custom bracket.

Basically the same as mine, I gabbed the low level indicator as well and have the LED mounting with an on/off and spray activation LED to the left of the steering wheel. My pump is under my trunk mat and in the spare tire well.

[bassed]

I thought that as well after i installed it, and was going to move it because i didn't think it stayed primed. I was about to take it out and move it but then realized that the check valve keeps it primed. so its just fine like that, there is always meth/water primed to the pump. You can see from where i put my fuel filter to keep crap out of the pump and jets.

Those pump as are all Gravity fed and it doesn't matter if it is SNOW or VAST ect.... They all use the same pump from RV toilets. Unless they have changed in the past 3 months, which I've not heard of I would lower you pump down and hang it off the frame rail if you're to keep it up front.

[rouellettea4]

Underneath the tank.


Fits perfectly with custom bracket.

K'Nex set for the win!

[casawhites4]

wow..goodness....a ton to know about the w/m injection...just got that and just ordered my FMIC...cant wait to throw it on the car and see how this beast really is....any ideas on how to mount this...i like the trunk idea..but how about the low level indicator, i really like that function from the regular washer fluid tank.

[infinkc]

wow..goodness....a ton to know about the w/m injection...just got that and just ordered my FMIC...cant wait to throw it on the car and see how this beast really is....any ideas on how to mount this...i like the trunk idea..but how about the low level indicator, i really like that function from the regular washer fluid tank.

im going to relocate my windshield low level sensor to a tank in my trunk. so it uses the stock light.

[GTMRS4]

[PinoyS4]

what is that thing it's sitting in?

[JDM EJ1 95]

its a reservoir.

[bassed]

im going to relocate my windshield low level sensor to a tank in my trunk. so it uses the stock light.

Bad Idea the stock level sensor fails to read properly with Methanol. Buy the 30 dollar one from Snow to avoid this problem.

[Allaidback]

with you guys mounting these in the trunk where are you running the hoses to the front of the car?

[JDM EJ1 95]

Bad Idea the stock level sensor fails to read properly with Methanol. Buy the 30 dollar one from Snow to avoid this problem.

where are you getting this info?


standard washer fluid is water/meth

so youre telling me that the factory level sensor isnt made for washer fluid either?

[ms4cd]

where are you getting this info?


standard washer fluid is water/meth

so youre telling me that the factory level sensor isnt made for washer fluid either?

I have the same problem. For some reason the stock sensor does not read well with meth. It gets confused, any way to change out the stock one for the snow unit?

[S4 in_lowplaces]

is there really a need for two nozzles? everything meets at the Throttle body so i would say one nozzle is all you need.