I started building my sub enclosure this weekend. Should be done some time next week. I cut the wood (3/4 MDF), laid it out roughly. Still need to radius corners, assemble, caulk, sand, lay fiberglass, sand, bondo, sand, and paint. I goal is to paint it to match the outside of the car, so it looks like an actual part of the car and not a sub enclosure. No carpet for me!

Putting in 2 JL 8W7 and a JL 500/1 monoblock.

Before I get comments, I know the supports are not even, they are not screwed down yet, only sitting in there for support to hold the top up.