Stasis FWD vs. Quattro coilovers...any difference?

**chrissurfr** · 09-13-2008 05:40 PM

I am looking to pick up a set and noticed the same part number for both fwd and quattro coilvers. Am I missing something here? Shouldn't they be different?
Thanks!

**Matt Devo** · 09-13-2008 06:36 PM

Originally Posted by chrissurfr

I am looking to pick up a set and noticed the same part number for both fwd and quattro coilvers. Am I missing something here? Shouldn't they be different?
Thanks!

most companies sell a single set for FWD and Quattro. Some even sell a single set for 1.8T and 3.0l, sedan and avant too (like Stasis, Koni, Tein)

**B6driver** · 09-13-2008 06:40 PM

the usual difference would be that Quattro has a little beefier rear springs... but everything should mount up

**chrissurfr** · 09-13-2008 06:47 PM

so i can get the same coilover set for my fwd, that fits quatto, correct?

**A4 in SC** · 09-13-2008 07:19 PM

To confuse things a little more, the same part number is listed for the B6 S4 too. (for the MS suspension since Stasis isn't offering the SS suspension for the S4).

**chrissurfr** · 09-13-2008 07:34 PM

WTF...haha....

**B6driver** · 09-13-2008 08:28 PM

you should be ok. the mounting points on both Q and FWD are the same. just the spring weights are different

**A4ringedONE8T** · 09-13-2008 08:45 PM

Originally Posted by chrissurfr

so i can get the same coilover set for my fwd, that fits quatto, correct?

Yes, Ive got Tein SS's for a Quattro on my car

**absolutegtr** · 09-13-2008 08:47 PM

I wouldnt put FWD coilovers on a quattro, but quattro coilovers on a FWD should be fine!

**A4ringedONE8T** · 09-13-2008 08:54 PM

Originally Posted by absolutegtr

I wouldnt put FWD coilovers on a quattro, but quattro coilovers on a FWD should be fine!

x2

**chrissurfr** · 09-13-2008 09:08 PM

thanks shawn..i knew you would come through haha

**chrissurfr** · 09-17-2008 01:34 PM

just to confirm...i will be ok with the factory settings from stasis quattro coilovers on my fwd and be able to put them on my car out the box without adjusting anything....right?