Removing trim, etc..

[zach_morris]

Can some one tell me how to remove the following parts:


I want to replace the fog light housing with a mesh, anyone done it?
Also want to paint the trim below the trunk myself, anyone done that?

Fog light assembly:



Trim below the trunk:




P.S. Instead of another thread ill just jack my own. Can't find these wheels anywhere on the net so I can find the offset. Ever heard of them? (näo) They are 20x8.5 (they came with the car)........does it look like I can lower it with a coil over kit without issues?

[RAudi Driver]

Front trim: Turn that screw 90 degrees.

As far as the wheels, take one off and look for a number coupled withthe letters "ET" or just ok for a number somewhere n the neighborhood of 30 to 36. Your offsets look prety low. by looking at that pic, i would guess 32. You can lower it but will probably rub if you are running 245 tires. You can minimize yourrubbing by removing the 12 o'clock bolt in the front fender. The rears you would have to roll, which i am not a fan of.

[FastB7S4]

a lot of people custom fit the RS4 fog grills (honeycomb mesh). ECS sells a kit.

[littleredwagen]

Front trim: Turn that screw 90 degrees.

that screw is an adjuster screw i believe, with B7s they are just snapped in the bumper.

[RAudi Driver]

that screw is an adjuster screw i believe, with B7s they are just snapped in the bumper.

Sorry, it's a screw on the B6's.