- Boser Story / PART 2!

[EUROaleksey]

Well, whoever was interested, here it is... oetty replica front is on, and boser is wheeled and finished... fitment A... too light for the stock hood-shock, just gotta remember to hold it when opening :)

As for the caractere replica grill.... i expected this - so no biggie.. The problem with this cheap (100$) piece of crap, is that there are no clips like the OEM grill has to clip on (over) the bumper.. But there are holes on the other side of it... So i either drill screws through the boser, or trim it down for the perfect fitment and silicone it to the hood... Propably gonna go with the second option... Because even if i do use screws, fitment is not that great... fits the hole well and even... but the middle is a bit too thick so it wobbles and sticks out a bit..

But here is the pic without grill... sunday or monday i should have the grill on though... Let me know what u think so far :) thanks

[pondside36]

I know on my stock grill, I had to trim the middle/bottom tab to let the grille fit flush and clip in place.

[HTA A4]

Your car looks completely different now! But in a good way! Nice work and good luck with the grille

[michgo]

Moar pee el zee.

Car has a whole new look too!

[heateris]

nice man, they did a good repair job.

[EUROaleksey]

more pics next week... zoomed in ass shot (didnt feel like goin outside, raining here right now..) hah

[michgo]

What rear is that? Drop in the future?

[robsilvr85]

Awww look at those two cute lil pieholes...lol. Sorry bro it really sticks out on that pic. I still have the stock exhaust tips too

more pics next week... zoomed in ass shot (didnt feel like goin outside, raining here right now..) hah

[EUROaleksey]

^^^ hahaha... soon, soon ;)

michgo, thats a deval rear.... drop - yes, im already running eibach springs/shocks, lowered it but not as much as i wanted... ill get coilovers in spring.. snows a lot here in michigan, cant go too low..

[A4natomical]

the front end is looking sweet.

[orangelmo]

What rear is that? Drop in the future?

Deval rear with CF diffuser

[akaEsCo01]

Your front is mean especially with that front plate

[DEMI]

The authentic Caractere grill doesn't have any clips either

[EUROaleksey]

DEMI, REALLY?... wtf... do u have one, is that how u know?... then please, tip on mounting..? cause im a little sceptical about my silicone way of mounting it... worked great for me so far, but its a "pain in my assholes"..



and.. thought most of you forgot what the stock engine bay looks like ;) haha

[Ill 3.0]

The authentic Caractere grill doesn't have any clips either

True, mine is screwed in.

[JA4]

car looks great bro...but please dump that thing! haha it would so much better lowered..IMO

[aaaudiprotein]

I really like your car Alexey, realnaya :)))
Is this grill you are talking about off of Ebay? I almost bought one, but then changed my mind. What about using just 3m tape?

[DEMI]

DEMI, REALLY?... wtf... do u have one, is that how u know?... then please, tip on mounting..? cause im a little sceptical about my silicone way of mounting it... worked great for me so far, but its a "pain in my assholes"..

Yah I have the authentic one. IIRC the grill pops in and there are a couple screws that hold it in. I think it also comes with some adhesive tape. It fits well with out any effort. Good luck

[geoshu]

Front end looks sick, the only thing I dislike is the rims. Something with a 3" lip on the wheels would look sick.

[doublezero30]

nice dude! hows that replica front fitting? any trimming or modification to get it to fit well? car looks sick!

[B6Lovin]

and.. thought most of you forgot what the stock engine bay looks like ;) haha

its funny that you should say that -- because I really did forget LOL. came up earlier at the waffle house... looking at pictures of my car on my phone someone asked if i had a picture when it was stock to compare - i said no, and tried to explain what it used to be like... but i had forgotten so much that i just gave up hahahaha

[EUROaleksey]

aaaudiprotein, da, ebayskaya kakashka.. 3m tape is definately an option, but the surface isnt wide enough and not straight enough... it might not hold... ill just do both, tape and silicone i think..

geoshu, yeah i know.. those were supposed to be my cheap winter rims, but i ended up driving on them all summer since i didnt have extra 2k layin around... i am going to get RS4 reps in onyx black i think... im pretty sure that will be my choice..

doublezero30, thank you :), and yes, had to work on it quite a bit... couple self-cuttin screws even had to be used on the very bottom of the wheel-well..

B6Lovin, I too want to forget what the stock engine bay looks like............... :)

[Audituning02]

Before you do the silicone jobby you should look into the thinest 3M tape you can find with some adhesion promoter. If you go the silicone route you may have a paint peeling problem later on should you decide to change out the grille. Oh and the onyx black RS4 reps is a great choice for the color scheme you got goin on

[DEMI]

da, ebayskaya kakashka

lol

[BOPOH]

more pics next week... zoomed in ass shot (didnt feel like goin outside, raining here right now..) hah

what kinda spoiler is that?