To: Quad Mufflers Community!

[starfriend]

Hi Everyone,

To the guys running quad mufflers: (2x2 mufflers)
1) is there any rear bumper that will make it fit without cutting it?
2) what mufflers do _YOU_ use? pictures?

I currently got 3" all the way from the turbo, to a Y split to 2x 16600 Magnaflow mufflers, those are going out the window in favour of quad tips!:)

- star

[AudiA4Turbo22]

^^ABT rear looks best, also Kerscher, Reiger, etc.

[A4natomical]

Quad tips ftw

i hope you guys dont mindvvvv

[starfriend]

that second car is just sick, god damn :D first one doesnt look THAT good, i want only the tips to show, not the whole resonator ;)

edit: the ABT bumper needs to be trimmed for the occation?

[GO-GOTEKNO]

It would be a sin the cut-up my milltek but jesus do 2 tips look clean

[Arclight]

Abt - no trimming of any type is necessary and fitment is factory like. I recommend NOT using the factory hangars if you want the tips tight to the body kit.

Magnaflow 14815 w/ dual 3" outlets

[IMG]

[starfriend]

man, you ass looks SICK! :) do you have a picture from right behind it?

[HP18]

if you don't want the resonators to show just paint them black

another pic of mine

[starfriend]

if you don't want the resonators to show just paint them black

another pic of mine

god damn... that care amazes me more and more everytime i see it!
What ass do you have?

[HP18]

ABT

[A4ringedONE8T]

lol you're going to see the muffler cans/resonators no matter what from behind when the bumper is cut for the quad tips. If you dont like that, paint them black as said

That rear shot of my car straight on doesnt look that great either, looks much better in person as all these cars do

[LampyB]

this is the greatest A4 picture thread ever. please post more of the white ABT USP!

[starfriend]

totally awesome a4ringed.. what mufflers do you have? and how do you like them?

[A4ringedONE8T]

totally awesome a4ringed.. what mufflers do you have? and how do you like them?

Magnaflow 14816, I have a center muffler as well which I need to remove. Other than it being a bit quiet because of that, its good

[DeanUW]

S4 Rear FTW!

[starfriend]

those bumpers are trimmed, yes?

[Gondi Stylez]

^^yuppers! The S4 rear needs to be trimmed to fit quad tips!

[starfriend]

nevertheless, its freakin' hot!

[manhertm]

Hey what do you guys use to trim your S4 bumpers for quad tips?

[starfriend]

my best guess would be a dremel and some fine fine fine sandpaper to make a nice finish afterwards... i aint doing this myself tho, i need it to be perfect, something i dont think i can do on my own (perfectionist.)

[DeanUW]

Hey what do you guys use to trim your S4 bumpers for quad tips?

my best guess would be a dremel and some fine fine fine sandpaper to make a nice finish afterwards... i aint doing this myself tho, i need it to be perfect, something i dont think i can do on my own (perfectionist.)

No sanding or dremel, I used an air saw. Dremel will melt the ABS

[A4ringedONE8T]

No sanding or dremel, I used an air saw. Dremel will melt the ABS

x2, agree 100% ... DO NOT attempt to use a dremel. Make a template for the cutout you want, tape them to the bumper, draw a line, cut with an air saw, use a sanding block with some heavy grit to clean up the cut, take to body shop and theyll do the rest

[DeanUW]

x2, agree 100% ... DO NOT attempt to use a dremel. Make a template for the cutout you want, tape them to the bumper, draw a line, cut with an air saw, use a sanding block with some heavy grit to clean up the cut, take to body shop and theyll do the rest

haha Crazy! Thats exactly step by step how I did mine too Shawn!

[doublezero30]

what rear is that? looks amazing.

[italian a4 1032]

oettinger i think nate

[El_Chapusca]

what rear is that? looks amazing.

Oetty