Local shop that does mods

[Sfinxs]

Anyone know local shop near everett wa that installs short shifter? i'm looking to get the jhm ss and not sure where to go.

[Sfinxs]

Anyone near seattle, everett, redmond that is good with their hands that wants to install short shifter, k&n drop in filter and snub mount for me? I'm willing to pay accordingly...
thanks.

[DolphinV8]

http://redmondeuropean.com/

[wRek]

http://www.achtuning.com

Achtuning
14515 NE 91st Street, Suite 7
Redmond, WA 98052

Phone: 877.722.4886
Call and ask to talk to Dion. Let him know that Wrek told you to call, so he knows that I do care. :)

[Sfinxs]

thanks for the info guys...

quote from redmond european
1.5hrs X $100/hr - $150 for snub mount install
3hrs X $100/hr - $300 for jhm ss

You guys think this is typical in terms of total hours and rates?

[jdaigner]

have you seen the install videos from jhm's website on the ssk. Seems pretty straight forward.

[Rhinop21]

Dude do it yourself, its very easy.
I did mine in under an hour with no prior experience.

[Eurotuned_A4]

yeah, installing the short shifter is easy. just make sure before you put it all back together that you have it adjusted so that you can get it in every gear.

[Triple8Sol]

I have several friends that are ASE certified Toyota Master Techs, and do alot of sidejobs in their spare time, for much less than any shop would charge. They stay really busy with extra work, doing everything from full 30K maintenance to suspension to forced induction. Feel free to shoot me a PM if you're interested.

[Tifosi]

I have several friends that are ASE certified Toyota Master Techs, and do alot of sidejobs in their spare time, for much less than any shop would charge. They stay really busy with extra work, doing everything from full 30K maintenance to suspension to forced induction. Feel free to shoot me a PM if you're interested.

Any of them familiar with Mark II MR2 Turbos ? TIA.

[Triple8Sol]

Any of them familiar with Mark II MR2 Turbos ? TIA.

Absolutely. However, they usually aren't into doing stuff like diagnosis since it's very time consuming and doesn't pay that well b/c of the time involved.

[Tifosi]

Absolutely. However, they usually aren't into doing stuff like diagnosis since it's very time consuming and doesn't pay that well b/c of the time involved.

It is not for a diagnostic visit, more like replacing the suspensions. Please LMK if they may be interested, TIA.

[Triple8Sol]

It is not for a diagnostic visit, more like replacing the suspensions. Please LMK if they may be interested, TIA.

Sure, just shoot me a PM with the exact year/model/trim of your car, and exactly what parts you want installed, and I can get you a quote.

[AWDios]

Join PSTOC, we have a member that's also a certified master mechanic and will pretty much help with anything. Guy is amazing.

[Mike@Startup]

That quote seams about right. The SS is not hard to install, but takes some time to adjust it properly. If you mess it up, forget about reverse, & scrapping your knuckles when you shift. It can take some time to get it all right.

The snub, for being so small, it's a PITA to get to, 1.5hrs seams spot on. Most of the time, people wait until they do the timing belt, then the install is free, since they are in there.

[jeremy@matrix]

SSK should probably be less at about 1.5hrs IMHO.
Snub should be a bit more IMHO.

Redmond European is great. Cantrell Motorsports in Kirkland is also a good option for lots of high performance stuff.