Audizine - An Automotive Enthusiast Community

Page 1 of 2 12 LastLast
Results 1 to 40 of 58
  1. #1
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Guest-only advertisement. Register or Log In now!
    Quote Originally Posted by High Flow Catalytic Converter, B5 & B6 1.8T
    Stainless steel high flow cat upgrade for longitudinally mounted 1.8T engines. Mandrel bent, featuring high-flow 250 cell catalytic converter.

    Full 3" including the cat and inlet and outlet flanges. Finest quality stainless steel cat matrix.

    Comes with installation hardware and gaskets.

    PLEASE SELECT WHETHER YOU WANT FOR A B5 or B6 1.8T


    PRICE = $305US Shipped in the lower 48
    Please send me a PM when you are ready to place your order and specify if you want your downpipe for a B5 or B6 chassis.
    Last edited by Wizard-of-OD; 09-06-2008 at 03:17 PM.

  2. #2
    Registered Member Two Rings
    Join Date
    Feb 07 2006
    AZ Member #
    10132
    Location
    ouellette

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    I need an HFC, I'm so sick of my test pipe and borla exhaust. My car sounds like a civic with a straight exhaust!

  3. #3
    Veteran Member Four Rings widgget's Avatar
    Join Date
    Dec 18 2007
    AZ Member #
    23464
    Location
    nj

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    looks very nice. If i was still in the market for one this one would be high on my list i think.

  4. #4
    Veteran Member Four Rings
    Join Date
    Oct 15 2006
    AZ Member #
    12580
    My Garage
    From a few to one...
    Location
    Arlington, VA

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    anyone know if this causes a CEL?..

    '97 A4 1.8TQ, '02 A4 1.8TQ Avant, '03 A4 1.8TQMS, '04 A4 3.0Q Cabrio - Sold
    '18 S4 Prestige - Kohlefaser Luft-Technik Intake

  5. #5
    Veteran Member Four Rings aaaudiprotein's Avatar
    Join Date
    Apr 17 2007
    AZ Member #
    17337
    My Garage
    2003 RS6
    Location
    Chicago Burbsss

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    If its the same as Labree then it shouldnt.
    I'm wondering if its basically the same though?
    BLACKHAWKS 2010, 2013 and 2015 STANLEY CUP CHAMPIONS
    Windows 7 WAS MY IDEA

  6. #6
    Veteran Member Three Rings Gondi Stylez's Avatar
    Join Date
    Oct 22 2006
    AZ Member #
    12780
    My Garage
    B6 3.0 Q
    Location
    Calgary, Canada

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    3.0?
    '02 DG A4 3.0Q 6MT | Member of Club 3.0


    .:. OEM+ : Custom I.C.E : Vogtland GT : Hartmann : SPP : Hawk : Goodridge : JHM : Apikol : 034 .:.

  7. #7
    Veteran Member Four Rings MikTip's Avatar
    Join Date
    Dec 25 2004
    AZ Member #
    4604
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    I had one from Tantrum...


  8. #8
    Veteran Member Four Rings IceMole's Avatar
    Join Date
    Oct 09 2007
    AZ Member #
    21666
    My Garage
    E46 M3
    Location
    PA

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    any B7 love coming?
    -Kris

  9. #9
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    It wont cause a cel and these are manufcatured in house.

  10. #10
    Veteran Member Four Rings aaaudiprotein's Avatar
    Join Date
    Apr 17 2007
    AZ Member #
    17337
    My Garage
    2003 RS6
    Location
    Chicago Burbsss

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by Issam@034 View Post
    It wont cause a cel and these are manufcatured in house.
    Do u guys have any videos of exhaust with it?
    And how much do u think it will last? Cause i remember Labree 250's were going bad a year after.
    BLACKHAWKS 2010, 2013 and 2015 STANLEY CUP CHAMPIONS
    Windows 7 WAS MY IDEA

  11. #11
    Registered Member Three Rings Amze's Avatar
    Join Date
    Apr 10 2007
    AZ Member #
    17166
    My Garage
    2003 Audi A4 1.8TQM
    Location
    Phoenix, AZ

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by NyteEscape View Post
    anyone know if this causes a CEL?..
    I never even got a CEL with my testpipe.

    And i used it for 6 months.

  12. #12
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Cant speak for Lebree's 250.If these go bad in a year then contact me...
    never heard of a catalytic converter going bad after a year.

  13. #13
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    All PM's replied.

  14. #14
    Veteran Member Four Rings downhillracer's Avatar
    Join Date
    Aug 20 2007
    AZ Member #
    20445
    My Garage
    97 Jeep Wrangler
    Location
    Costa Mesa / Mammoth Lakes

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    What size is the stock cat and pipe?

  15. #15
    Registered Member One Ring
    Join Date
    Jan 11 2009
    AZ Member #
    37311
    Location
    Alabama

    High flow Catalytic converter vs Test pipe

    What is the difference between the catalytic converter aftermarket vs a aftermarket test pipe??

  16. #16
    Senior Member Two Rings
    Join Date
    Apr 04 2007
    AZ Member #
    16987
    My Garage
    2003 A4 1.8TM, 1987 325, 1987 528
    Location
    Columbia/Nashville, TN

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    95% of the time, the only reason a cat will EVER go bad is because the engine is not running right and overheating it.
    Robbie
    2003 A4 1.8TM
    Motor F21 Turbo, FMIC, Green Tops, Meth Injection, Motoza Tune, Carbonio, Forge DV, Ecode Test Pipe, Neuspeed Catback, 034 Motorsport Solid Mounts
    Suspension Statis SS, Antera Type 309 18x8
    Interior/Audio Pioneer D/D Head, JL 450/4, JL 500/1, JL ZR650's, 2 - 8 JL 8W7's

  17. #17
    Veteran Member Four Rings EBG 18T's Avatar
    Join Date
    Mar 27 2005
    AZ Member #
    5877
    Location
    The Cold North

    Re: High flow Catalytic converter vs Test pipe

    Quote Originally Posted by CivicEK97 View Post
    What is the difference between the catalytic converter aftermarket vs a aftermarket test pipe??

    simply one has a catalytic converter and one is a test pipe (aka no cat).
    2001 A4 1.8TQM (in pieces..)
    2020 Chevy AEV ZR2

  18. #18
    Veteran Member Four Rings KPC1.8TQuat's Avatar
    Join Date
    Mar 20 2006
    AZ Member #
    10926
    My Garage
    2003 A4 1.8T Quattro, 2006 Triumph Daytona 675
    Location
    North Shore, New England

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Will this fit on a B6 tiptronic? Planning to mate to a Magnaflow 16600 Downpipe-back, and a Techtonics Tuning downpipe.

  19. #19
    Established Member Two Rings
    Join Date
    Mar 01 2007
    AZ Member #
    16047
    Location
    Bellevue, Wa

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Looks like a good unit, nicely sized too, my 250 cell labree is only 2.5 in and it threw a cell from day one, my oem cat went bad @ 70k. If it didn't shell out $$ for the labree i would definately get this instead.
    AZ Addict
    2003 1.8t Quattro 5 speed
    Mod List --= EuroGear Boser CF Hood, APR Stage 1+, APR R1, APR Snub, Magnaflow 16601 Exhaust, B5S4 Brake Upgrade w/SPP Dimpled & Slotted Rotors =--

  20. #20
    Veteran Member Three Rings
    Join Date
    Jan 16 2007
    AZ Member #
    14921
    Location
    Wetzlar

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Does not look like Emitec the way core looks. So which company makes this core?

  21. #21
    Veteran Member Four Rings lookaught's Avatar
    Join Date
    Apr 20 2007
    AZ Member #
    17432
    My Garage
    2002 1.8t Avant GTRS, Aprilia SXV 550, BMW F800GS, Ram EcoDiesel, 1990 Bronco
    Location
    Lander, Wyoming

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by LavaSurfer View Post
    95% of the time, the only reason a cat will EVER go bad is because the engine is not running right and overheating it.
    Or its running too rich or too lean. Too lean and you'll have other problems before a cat fails I think. You can run a car rich until the thing fails.
    Jon

    go > show

    Ich liebe mein Audi

    2002 GTRS Avant - Built with love, sweat, bloody knuckles, and pride.

  22. #22
    Senior Member Three Rings BLACKa4QUAT's Avatar
    Join Date
    Mar 26 2008
    AZ Member #
    26916
    Location
    union city, ca/fort worth, tx

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by IceMole View Post
    any B7 love coming?
    any answer on this issam?
    2006 A4 2.0Tqm, S-line, tech, FH-P8000BT, 10" sub, 800 watt,
    VAG-COM mods (remote windows, no chime), revo stg 1 tweaked
    AWE pedals, HRS4 DTMs/Eagle GT, VMR TP
    193.7 awhp/232 ft/lb/91 oct pre-TP
    16MAR09DSWHTAW

  23. #23
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Working on B7's shortly.

  24. #24
    Account Terminated Three Rings
    Join Date
    Mar 27 2008
    AZ Member #
    26938
    My Garage
    04 Audi A4 3.0
    Location
    North Jersey

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    3.0?

  25. #25
    Veteran Member Four Rings KPC1.8TQuat's Avatar
    Join Date
    Mar 20 2006
    AZ Member #
    10926
    My Garage
    2003 A4 1.8T Quattro, 2006 Triumph Daytona 675
    Location
    North Shore, New England

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by KPC1.8TQuat View Post
    Will this fit on a B6 tiptronic? Planning to mate to a Magnaflow 16600 Downpipe-back, and a Techtonics Tuning downpipe.
    X2

    Need to know ASAP

  26. #26
    Veteran Member Four Rings IronAudi's Avatar
    Join Date
    Jun 13 2007
    AZ Member #
    18758
    Location
    Middletown, CT

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    no 3.0 Love :(
    2018 C7.5 A65 3.0 S BB Bone Stock - for now.
    2008 B7 A4 2.0 T Brilliant Black|20% Tint|18" RS4 Reps LE|Bone Stock Brand new old Engine.

  27. #27
    Veteran Member Four Rings KPC1.8TQuat's Avatar
    Join Date
    Mar 20 2006
    AZ Member #
    10926
    My Garage
    2003 A4 1.8T Quattro, 2006 Triumph Daytona 675
    Location
    North Shore, New England

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by KPC1.8TQuat View Post
    Will this fit on a B6 tiptronic? Planning to mate to a Magnaflow 16600 Downpipe-back, and a Techtonics Tuning downpipe.
    ??

  28. #28
    Veteran Member Four Rings AudiOso's Avatar
    Join Date
    Aug 04 2007
    AZ Member #
    20076
    My Garage
    Do Hotwheels count?
    Location
    Boardman, OH

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Issam... will this fit on a B6 Tiptronic car?
    A couple of Audi's later...

    "It's a false state of elation... You can join the Prozac nation... If you want to..." - Killing Joke

  29. #29
    Veteran Member Three Rings infinitigor's Avatar
    Join Date
    Jul 17 2008
    AZ Member #
    30980
    My Garage
    02' b6 1.8t
    Location
    NYC

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by AudiOso View Post
    Issam... will this fit on a B6 Tiptronic car?
    +1
    revo//s4 front//sides//s4 rims//h&r//rs4 sway//b5 s4 brakes//rns-e

  30. #30
    Veteran Member Three Rings windyctyaudi's Avatar
    Join Date
    Jul 30 2007
    AZ Member #
    19930
    My Garage
    '12 S4 prestige DSG
    Location
    Chicago

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by MikTip View Post
    I had one from Tantrum...

    So did I and mine caused a CEL

  31. #31
    Active Member Two Rings
    Join Date
    Dec 22 2008
    AZ Member #
    36645
    Location
    Bronx, NY

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    I'm in need of one, but for a 3.0

  32. #32
    Veteran Member Four Rings Kittrell's Avatar
    Join Date
    May 07 2008
    AZ Member #
    28523
    My Garage
    B8 S5 - 4L Q7 TDI
    Location
    Broomfield, CO

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Here is a "living" pic. Mine looks different from the pics. I do not know if its the difference between the B5 and B6. But I imagine they use the same core for both, so I couldn't tell you.


  33. #33
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    You have the B6 unit,pictured is the B5 unit

    we now have these for the 02 Sensors
    O2 Sensor Spacer
    Oxygen sensor spacer, spaces out the O2 sensor to remove MIL or CEL.


  34. #34
    Veteran Member Four Rings QTC's Avatar
    Join Date
    Sep 16 2006
    AZ Member #
    11552
    My Garage
    2004 B6 A4 1.8t 6MT; 2013 F30 320i 6MT; 99.5 Pathfinder 4x4; Mk7 Golf TDI
    Location
    Wynnewood, PA

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Is the spacer available because the cat is throwing a CEL? Or is it just in case?
    Dahlback | AWE | Milltek | Vogtland | H-Sport | Oettinger | Thule | OEM+

  35. #35
    Veteran Member Four Rings Kittrell's Avatar
    Join Date
    May 07 2008
    AZ Member #
    28523
    My Garage
    B8 S5 - 4L Q7 TDI
    Location
    Broomfield, CO

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by Issam@034 View Post
    It wont cause a cel and these are manufcatured in house.
    They better not be throwing a CEL.

  36. #36
    Active Member Two Rings
    Join Date
    Sep 21 2008
    AZ Member #
    33268
    Location
    Finland

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Mine threw a CEL.

  37. #37
    Veteran Member Four Rings Dolphin18T's Avatar
    Join Date
    May 17 2007
    AZ Member #
    18120
    Location
    Denver, CO

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by jarge View Post
    Mine threw a CEL.
    Not good...
    -Ryan
    Maestro Tuned

    Now with slushbox-delete mod!



  38. #38
    Veteran Member Four Rings QTC's Avatar
    Join Date
    Sep 16 2006
    AZ Member #
    11552
    My Garage
    2004 B6 A4 1.8t 6MT; 2013 F30 320i 6MT; 99.5 Pathfinder 4x4; Mk7 Golf TDI
    Location
    Wynnewood, PA

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by jarge View Post
    Mine threw a CEL.
    More details? Are you running the spacer or no? I've been thinking about this, and don't mind running the spacer to alleviate the CEL, but I don't want a CEL after all that.
    Dahlback | AWE | Milltek | Vogtland | H-Sport | Oettinger | Thule | OEM+

  39. #39
    Active Member Two Rings
    Join Date
    Sep 21 2008
    AZ Member #
    33268
    Location
    Finland

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    I don't have spacer in my O2, i'm going to stop by the shop that did my tune so they would remove the CEL permanently.

  40. #40
    Registered User Four Rings
    Join Date
    Feb 26 2006
    AZ Member #
    10540
    My Garage
    Over 20! too many plant pots!
    Location
    Earth

    Re: *** AZ Intro : High flow Catalytic converter - B5 & B6 Models ***

    Quote Originally Posted by Kittrell View Post
    They better not be throwing a CEL.
    In some cases (well it is actually 2 cases....) a CEL was thrown hence the spacer.If you throw a cel then get the spacer or delete it in the software.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.