Can Anyone ID this clutch??

[will175]

Trying to figure out what brand clutch it is. All I know it is uses a rs4 pressure plate and is matted to a fidanza LWF. Thanks in advance for the help.

[AMC]

didnt know we used 6 puck clutches like that? is that an rs4 plate painted red, also needs to be resurphased.

[2001S4NY]

looks like a clutchnet PP with a Solid Hub 6 puck

[will175]

the shop is saying that the pilot bearing does not fit in there like it should. Is it missing something. Sorry for being so non informative.

[2001S4NY]

the shop is saying that the pilot bearing does not fit in there like it should. Is it missing something. Sorry for being so non informative.

umm the pilot bearing goes in the flywheel not the clutch disc

so i guess who ever is doing your car has never done a clutch job

[NYCVR6]

umm the pilot bearing goes in the flywheel not the clutch disc

so i guess who ever is doing your car has never done a clutch job

Yup looks like a clutchnet setup to me.

[will175]

umm the pilot bearing goes in the flywheel not the clutch disc

so i guess who ever is doing your car has never done a clutch job

Sorry I forgot to post pics of the LWFL.

[will175]

[2001S4NY]

k now take the pilot bearing and try and put it in the flywheel hole and take a pic, does it fit or its too small? big?

[will175]

These are the pics the shop sent me. He said the pilot is two small also it sits recessed in there. I thank you for your help and patience.

[will175]

also he said that he thinks there is something missing for the pilot to sit into, does this look to be true. Also the flywheel bolt that I bought (OEM ones) bottom out before being able to tighten them down (too long of a bolt).

[amd is the best]

also he said that he thinks there is something missing for the pilot to sit into, does this look to be true. Also the flywheel bolt that I bought (OEM ones) bottom out before being able to tighten them down (too long of a bolt).

Southbend cluctches usually paint their pressure plates red, maybe its one of theirs.

[will175]

thanks Ill hit them up today.

[2BblkAudis]

Will,

Good luck with the build. Looks like the shop still has your car? Hope everything is going well. Let me know when it's out. I'm still waiting for the ECU. Good luck with everything.

[will175]

thanks bro. Yah I wish the car was being worked on up there at a more competent shop. One that could figure this shit out for themselves.lol. I was suppose to have it back today. Hope I get this all worked out today. Then the ECU is all yours.

[ThirdStrike]

the person that sold it to you didnt tell you these specifics?

[will175]

Bro "Silence" sold it to me, thats why I was asking if you knew how to contact him,lol. My shop is insisting that something is missing. Im talking with fidanza and southbend right now. And this clutch suppose to has less then 3k miles. But it looks like more. Oh well.

[will175]

well got off the phone and they said it might need a clutch specific center ring pin.

[ThirdStrike]

Bro "Silence" sold it to me, thats why I was asking if you knew how to contact him,lol. My shop is insisting that something is missing. Im talking with fidanza and southbend right now. And this clutch suppose to has less then 3k miles. But it looks like more. Oh well.

i wasnt trying to bring private business out. i know who sold you the clutch. i was just wondering if he told you teh specifics on the clutch? and if so what did he tell you? ??

[will175]

oh my bad. I was not trying to make silence look bad at all. He is in the process of helping me out big time with this. He did tell me what he knew when he sold it to me. He is a good seller and good guy. I would buy from him again. I think its more my shop then anything else. I wish my car was back up there...

[Silence]

I let him know everything up front, and I definitely only had about 2-3k miles on it. I took it out because I didnt like the LWFW or the engagement of the clutch. All of which I told him. As far as clutch and flywheel, its a fidanza LWFW and an Rs4 style pressure plate. Look at the SAC mechanism. Not sure why his shop os having so many problems.

[will175]

^Hey bro, sorry if it sounded like it looked bad on your part. I was just really stressed out with my shop and the whole thing. Thanks for all the help.