BBS LM sizes?

[craymond5]

Did a search but couldn't find anything. Wasn't someone on here running 19 by 10 LM's in the rear? Anyone know what offset they were running?

[SGVA4]

Did a search but couldn't find anything. Wasn't someone on here running 19 by 10 LM's in the rear? Anyone know what offset they were running?

19x10 et40 otherwise you'll be rubbing like no tomorrow (if your car is dropped)

[craymond5]

That's definitley the et they were running? I just want to make sure the 40et wasn't rubbing the suspension and cleared the brakes

[volcomic]

19x10 et40 otherwise you'll be rubbing like no tomorrow (if your car is dropped)

You'll need more than that... I'm lowered and running et32 wheels that are 8" wide with 235's and I'm really close to touching the fender. Although the rear fender of the Avant is different, I would bet the extra 8mm et40 would provide would not make up for the extra inch of wheel.

You'd need et57 if you wanted the face of the wheel to be where mine are (it would actually be .4mm further out than mine) and then you'd be sticking really far into the wheel well.