Some pics of my ass...

[rxrep]

Never really took any good pics of the back end since I shaved out seam. Here are some from this evening. Also some pics of "The Fleet", as today was detailing day for everything.

[A4ringedONE8T]

Very nice, and very pretty surroundings

[HTA A4]

Looking good as always Lee! But whaaat? How come the Audi isn't in the garage??

[dirtybrd]

I think your car is a model A4!

[akordboy]

my gawd your ass is soo Hot....but seriously, you car is super nice.

[rxrep]

Looking good as always Lee! But whaaat? Only one stall? And the Audi isn't in it??

The black company car is in the garage so I can wax it out of the sun. Blacky no likey sun. You can see it in the last pic that is showing front of Audi with garage open.
The Audi and bike are normally in the stall.
I'm doing an addition next summer; already have plans done for whole extension out the right side and back that will have huge master suite/bath, downstairs gym, and two car garage, for total of 3. Should be fun.

[HTA A4]

Cool man! Sounds great!

[Pete4 1.8t]

that A4 looks amazing! I want to still your grillz I wish I had some honeycomb

[F16HTON]

Alles Guten

[Jimbobdaga]

very very clean I love it

[actlsub9]

When that was done did they only put new paint on the rear bumper, or did they blend it into the rear fenders?

[MikTip]

Your ass is so smooth!

[A4TUNE]

looks awesome however i wouldn't have done it with the stock rear, maybe went with usp or s4 rear first.

[rxrep]

looks awesome however i wouldn't have done it with the stock rear, maybe went with usp or s4 rear first.

S4 doesn't have seam and that's kind of what I was patterning it after. I don't like the USP rear.
I did it because it didn't cost anything other than some fuzor and paint. It was total DIY. I was thinking of putting on the CF S4 exhaust cut-out, but some fab work would need done to make it fit.

Greg, no blending was done. Bumper was painted off of car. There is actually blending done on passenger side right around where gas cap is from when I had that dog hit back before spring. Sprayed whole passenger side and blended there. But no bumpers, front or rear where blended.
I was thinking about shaving seems between bumpers and fenders/quarters, but then I'd have a bitch of a time doing timing belt, lol. I may still do it after I change timing belt.

[actlsub9]

Greg, no blending was done. Bumper was painted off of car. There is actually blending done on passenger side right around where gas cap is from when I had that dog hit back before spring. Sprayed whole passenger side and blended there. But no bumpers, front or rear where blended.
I was thinking about shaving seems between bumpers and fenders/quarters, but then I'd have a bitch of a time doing timing belt, lol. I may still do it after I change timing belt.

Yea I was looking at the 4th pic you posted, the color on the bumper looks off. But so does mine I think its more of the design of the angles of the body that make it look so off. Even with bone stock cars it doesn't seem to look right. I need to get a new rear bumper so I am going to try and have it blended into the fenders, but I won't be surprised if it still doesn't match

[bigbro]

looking good

[rxrep]

Yea I was looking at the 4th pic you posted, the color on the bumper looks off. But so does mine I think its more of the design of the angles of the body that make it look so off. Even with bone stock cars it doesn't seem to look right. I need to get a new rear bumper so I am going to try and have it blended into the fenders, but I won't be surprised if it still doesn't match

It's way tough to get plastic to match. Usually it's because of the flex agent, but I don't use flex. But, plastic always comes out darker for some reason.
I read somewhere that our bumpers are painted away from the bodies anyhow, so it's a different paint batch even from the factory.
If you notice the front bumper, it does match even in pics. One reason is that it was done by someone who really knows how to mix. And he matched it dead on. The front bumper and the passenger side spray were done from different paint batches. He sprayed the passenger side with one, blended it in in the back, then mixed up and painted the front bumper separate. He knew how the plastic would change the hue and mixed accordingly.
The rear is not noticable to the naked eye. It only shows up on pictures. And it's "off" for two reasons. First, I did it... and I'm not a paint mixer. It was done with a straight generic mix from the auto body supply from the paint code. Second, it wasn't blended, because I suck at doing that, especially with silver.

[NightRoller USP]

The front of your car is DY-NO-MITE!!!
So sweet, what kind of upper grill is that?

[rxrep]

The front of your car is DY-NO-MITE!!!
So sweet, what kind of upper grill is that?

Thanks. The upper and lower center grilles are variations on Matt Devo specials.... in other words, custom DIY.

[F16HTON]

My ass is fatter

[A4 KiDD 810]

Your car is so nice and clean, plus i love silver. And it looks really good in your driveway, nice shot.

[HTA A4]

Greg, let's see some more pics of your ride!

[F16HTON]

It is pretty plain, I do not take many pictures

[Audi_Chick]

Your car is beautiful

[rxrep]

My ass is fatter

I'm bigger up front, where it matters, lol... (up front meaning bumper, not engine/turbo, hehe)... your car does look sweet from the back.

[A4natomical]

ghetto booty ftw.

[natalia]

Clean. I love it!

[HTA A4]

Looks sweet Greg! I like that IC!!!

[actlsub9]

It's way tough to get plastic to match. Usually it's because of the flex agent, but I don't use flex. But, plastic always comes out darker for some reason.
I read somewhere that our bumpers are painted away from the bodies anyhow, so it's a different paint batch even from the factory.
If you notice the front bumper, it does match even in pics. One reason is that it was done by someone who really knows how to mix. And he matched it dead on. The front bumper and the passenger side spray were done from different paint batches. He sprayed the passenger side with one, blended it in in the back, then mixed up and painted the front bumper separate. He knew how the plastic would change the hue and mixed accordingly.
The rear is not noticable to the naked eye. It only shows up on pictures. And it's "off" for two reasons. First, I did it... and I'm not a paint mixer. It was done with a straight generic mix from the auto body supply from the paint code. Second, it wasn't blended, because I suck at doing that, especially with silver.

kudos to you then, you did a better DIY job at matching on yours then a shop did on mine

[F16HTON]

I'm bigger up front, where it matters, lol... (up front meaning bumper, not engine/turbo, hehe)... your car does look sweet from the back.

I planned it that way...since that is all anybody will ever see anyways.

[HTA A4]

Hahaha! Nice! I'm going to come out to Cali some time and run with you Greg! Here's my aaasssssss!

[IMG][/IMG]

[actlsub9]

Greg, I think some black ecodes would really look good on your car.

[F16HTON]

I have S4 Bi-xenons, but I am painting the insides Ebony Pearl and having the reflectors wrapped in CF. Since I no longer drive the car, I will let everyone know what is up...

Right now my wheels are Ebony Pearl Metallic with polished lips, I will be changing the centers to matte black and the lips will be candy purple. I will also paint the rings candy purple and the trim piece on the trunk too.

My Alcon calipers are red but I am having them stripped and polished, the lettering will be purple. Other than that, no real changes.

[rxrep]

I have S4 Bi-xenons, but I am painting the insides Ebony Pearl and having the reflectors wrapped in CF.

You prick.

[nezach]

wow this is really nice car

what kind of material did you use for your grills. i am looking for usp grills right now and i really like the way yours look

[rxrep]

wow this is really nice car

what kind of material did you use for your grills. i am looking for usp grills right now and i really like the way yours look

Me, or Greg's?
If me, it's just expanded metal. There are always distributors of the stuff in bigger cities. I found the pattern that most closely resembled the stock USP fog grilles and bought a 4'X8' sheet of it. Used cardboard for templates, then went through hundreds of dremel cutting disks to cut the shape from the metal. The upper was then fabbed back in to the stock surround using fuzor and duramix. I then cut out the rings and fabbed those on top. Wasn't fun.

[F16HTON]

Me, or Greg's?
If me, it's just expanded metal. There are always distributors of the stuff in bigger cities. I found the pattern that most closely resembled the stock USP fog grilles and bought a 4'X8' sheet of it. Used cardboard for templates, then went through hundreds of dremel cutting disks to cut the shape from the metal. The upper was then fabbed back in to the stock surround using fuzor and duramix. I then cut out the rings and fabbed those on top. Wasn't fun.

OCD, there is treatment for it

http://www.aafp.org/afp/980401ap/eddy.html

[actlsub9]

I have S4 Bi-xenons, but I am painting the insides Ebony Pearl and having the reflectors wrapped in CF. Since I no longer drive the car, I will let everyone know what is up...

Right now my wheels are Ebony Pearl Metallic with polished lips, I will be changing the centers to matte black and the lips will be candy purple. I will also paint the rings candy purple and the trim piece on the trunk too.

My Alcon calipers are red but I am having them stripped and polished, the lettering will be purple. Other than that, no real changes.

o i see

[actlsub9]

OCD, there is treatment for it

http://www.aafp.org/afp/980401ap/eddy.html

Last week cop pulls me over...

cop: wheres your front plate?

me: I just washed my car and I took it off for the wash

cop: You have OCD?

[rxrep]

Last week cop pulls me over...

cop: wheres your front plate?

me: I just washed my car and I took it off for the wash

cop: You have OCD?

It would take a huge sum of money to get me to move to a state with front plate requirements. That's how OCD I am.
Could be paradise with hot chicks and free beer.... and I'd still have to think about it.