speedo reading wrong speed.

[poseidon5]

Ok, I have a UK RS4 cluster, and everything works perfect except for the speedo (which is in MPH) is reading incorrect, at about 10MPH, it reads 20MPH, and around 60MPH, it reads at 100MPH. I have tried it on every setting for softcoding that I can find, and have matched all the settings under the adaptation from my original cluster. I know some people have had this same problem in the past, but I have not been able to find any solutions anywhere, here or AW. Please let me know if you have an idea, or solution.

[old guy]

Ok, I have a UK RS4 cluster, and everything works perfect except for the speedo (which is in MPH) is reading incorrect, at about 10MPH, it reads 20MPH, and around 60MPH, it reads at 100MPH. I have tried it on every setting for softcoding that I can find, and have matched all the settings under the adaptation from my original cluster. I know some people have had this same problem in the past, but I have not been able to find any solutions anywhere, here or AW. Please let me know if you have an idea, or solution.

This may help (maybe you have already seen it) Clicky click Sounds like you are reading KPH instead of MPH.

[poseidon5]

This may help (maybe you have already seen it) Clicky click Sounds like you are reading KPH instead of MPH.

I have not seen that before, but it seems to be for a B6, not a B5. thanks though. also, my odometer and everything else is fine, reading in Miles, and MPG for the mileage.

[poseidon5]

anyone else? this is driving me crazy. please help.