A Filter That FITS!

[A4ringedONE8T]

Thanks to a few of you that mentioned the Advance Autoparts $19.99 air filter special! Works and fits like a charm!! Now I know why the Honda guys put APC stickers on there car, they make some good shit! lol

[dirtybrd]

You ricer! Did you pick up some stick on fender vents while you were there? Hahaha

[mister_tu]

You ricer! Did you pick up some stick on fender vents while you were there? Hahaha

Or led washer lights? z3 fenders? deck spoiler? light up exhaust tip? neons?

[[email protected]]

I'll keep this in mind when I decide to get rid of my TIP

[A4ringedONE8T]

I'll keep this in mind when I decide to get rid of my TIP

Is your car running again?

[[email protected]]

The wagon is back up and running after being stupid, found the performance issue (cat core was clogging exhaust flow) and pushing the car into high boost without actually doing any tuning first.

Just stupid. I'll post pics of what happened when I get the camera out of the wagon.

Anyway it took 5 weeks to get my ECU back but now the car runs again and it is now in the bodyshop to get the front bumper treatment done. Pretty much missed all the shows this summer due to delays.

Now it is time to do some logging to get data to send back to get a properly adjusted file.

[Gondi Stylez]

How did you hide all the wires? Writeup?!

Gotta do that ASAP !!

[absolutegtr]

Sweetness!

[F16HTON]

Check the CFM flow on it Shawn.

[layzie]

have fun replacing your turbo when that filter gets sucked in that filter will not flow enough cfm and tear itself up. K&N makes a filter that will fit.

[A4ringedONE8T]

Check the CFM flow on it Shawn.

Its gotta be better then the screen, Ill look into it. Much better piece of mind than the open turbo/screen IMO

[A4ringedONE8T]

have fun replacing your turbo when that filter gets sucked in

Not really possible with how its made ... Its better than how Ive had it for the last 5k miles. And I take it that you've had this setup and know more than me about it?

[layzie]

because i wasnt busy i found it for you

http://www.knfilters.com/search/prod...x?Prod=RU-2510

i dont know more then you about your set up, but feel like i know enough to not put a 20 dollar apc filter on a 1500 turbo. i had a 650hp 35r honda, so i feel i do have experience with turbos.

[fatty1.8t]

Not really possible with how its made ... Its better than how Ive had it for the last 5k miles. And I take it that you've had this setup and know more than me about it?

burn

[layzie]

what? are you implying he burned me? lmao

[KraftwerkB6]

call me stupid but what is that stuff in the red box i highlighted??? thoes white symbols?? i saw them in the new eurotuner on someones car as well..

[fire27]

my eyes may be going but i think its 1552

[KraftwerkB6]

Ohh yea nice call, i see it now, kinda like one of thoes poster you look at and see a boat or somthing. I take it 1552 i some tuning company since its on his FMIC as well.

[JustinCase]

Its his company.

[tarzjdm]

Real HONDA enthusiast Don't put any APC products on their car..... RICERS DO!!!

[absolutegtr]

I honestly can see any problem running that filter. It may not flow as well as running open turbo, but I cant see how it would fold in on itself/

[layzie]

actually with a filter on it will organize the air and would be much better then with out a filter. i gave him a link to a K&N which is much better then the APC. i personally saw that same filter be sucked into a big turbo.

[A4ringedONE8T]

because i wasnt busy i found it for you

http://www.knfilters.com/search/prod...x?Prod=RU-2510

i dont know more then you about your set up, but feel like i know enough to not put a 20 dollar apc filter on a 1500 turbo. i had a 650hp 35r honda, so i feel i do have experience with turbos.

Don't you think if that fit a few of us would have it ... It is bigger, and hopefully from my picture you can tell that nothing bigger will fit

[A4ringedONE8T]

Ohh yea nice call, i see it now, kinda like one of thoes poster you look at and see a boat or somthing. I take it 1552 i some tuning company since its on his FMIC as well.

www.1552v2.com and yes its my shop. We made the FMIC in house from scratch using only a Garrett core (no endtanks) hence the reason I put our name on it The sticker thats in the FMIC is one we give out, the 1552 is one you get only by having something extensive done at our shop

[A4ringedONE8T]

Real HONDA enthusiast Don't put any APC products on their car..... RICERS DO!!!

It was a joke and no shit ...

[Don Supreme]

because i wasnt busy i found it for you

http://www.knfilters.com/search/prod...x?Prod=RU-2510

i dont know more then you about your set up, but feel like i know enough to not put a 20 dollar apc filter on a 1500 turbo. i had a 650hp 35r honda, so i feel i do have experience with turbos.

I run that KN filter on my car - kn ru2510...

Its works well, but the front is made of rubber / plastic and when the engine gets hot it gets a little soft... however, no problems so far.

[A4ringedONE8T]

I run that KN filter on my car - kn ru2510...

Its worked out well, but the front is made of rubber / plastic and when the engine gets hot it gets a little soft... however, no problems so far.

What manifold are you running? Treadstone?

[B6Lovin]

that K&N won't fit.

ask me how i know

[A4TUNE]

I would keep that metal screen on that you had before and put the filter on just in case.

[speedydragon]

ahh nice! I don't get how those white symbols connote to 1552 haha

[n7plus1]

why not get one from hks?

[Don Supreme]

What manifold are you running? Treadstone?

Treadstone huh ???

I have a tubular mani.

Manifold pics

[AudiA4_20T]

What manifold are you running? Treadstone?

Jay Thorton Tubular...


Shawn, what did u do with that Evap junk on the left side of the engine?

[FromS60toB61.8t]

Jay Thorton Tubular...


Shawn, what did u do with that Evap junk on the left side of the engine?

i also would like to know, i wanna get rid of my tip but just dont kno wut goes to where

[A4ringedONE8T]

why not get one from hks?

Doesnt fit

[A4ringedONE8T]

Jay Thorton Tubular...

Shawn, what did u do with that Evap junk on the left side of the engine?

The EVAP purge solenoid is still connected to the tank feed line and plugged into the harness, I just moved it to the fenderwell behind the liner

[A4ringedONE8T]

Treadstone huh ???

I have a tubular mani.

Ahh, nice

[B6Lovin]

why not get one from hks?

shawn beat me to it - won't fit. have one sitting right next to me if you want it to try and make it fit though :)

[JustinCase]

You really went through your share of filters didnt you.

[n7plus1]

damn, i thought it'd fit.