pictures of pss9 max lowered POR FAVOR

[mioStile]

I've searched high and low...and that is fasho fasho.

But, I can't find any pictures of pss9's lowered to their maximum level (or at least what I think would be their maximum level). For me, PSS9's work perfect, but I am an aficionado of going a little bit lower than what I've seen in pictures just far.

So, could you PLEASE help me out? thanks---
let the beautiful pic posting begin

[ant7701]

the can go LOW.....like real low!!! Im not sure about full tuckage low but they can go low. Im pretty low with another inch atleast.

[mioStile]

your car looks absolutely gorgeous! Thanks for the info!

[Dodge2Dub]

Mine is pretty low....I'm tucking in the back and a bit in the front with PSS9's. I'm actually thinking about raising it up a bit because the 245's are rubbing a lot on major inclination changes on the freeway as well as during aggressive cornering.

[mioStile]

Mine is pretty low....I'm tucking in the back and a bit in the front with PSS9's. I'm actually thinking about raising it up a bit because the 245's are rubbing a lot on major inclination changes on the freeway as well as during aggressive cornering.

Both of your guys' pictures have been immensley informative! If I were to run 245/30/20, you think I would run into problems being as low as you, C? I am going to run the same exact tires but don't know if the slight change in diameter will cause the sidewall geometry to change enough to elim/cause more rubbing

[Dodge2Dub]

I've had problems so I imagine that you will as well, especially running 20's on a 30mm sidewall while having the PSS9's set below 25" from ground to fender. With my 19's and the 245's, I'm rubbing enough that it actually started puncturing the sidewall. When I get my car back, it has an immediate appointment with F1 Motoring to have the fenders rolled/cut.

Btw, the tires are great! I picked them up at Performance Plus in Long Beach and it was well worth the drive. They gave me an incredible deal, well below the listed price which was already about 50% less than the PS2's!

[ngng]

the can go LOW.....like real low!!! Im not sure about full tuckage low but they can go low. Im pretty low with another inch atleast.

god damn that is hot! lose the front lic :P

[AndreNY]

if you wanna go low PSS9's are last coils you should do

[DGS4]

Andre any updated pics of your ride? Im kinda stoked to see what it looks like now.

[mioStile]

Andre any updated pics of your ride? Im kinda stoked to see what it looks like now.

in a few months! I have to pay off my wheels first before I buy dem der tires. Believe me...I'm dying right now! Will update asa I can!

[Lake Powell]

Mine is pretty low....I'm tucking in the back and a bit in the front with PSS9's. I'm actually thinking about raising it up a bit because the 245's are rubbing a lot on major inclination changes on the freeway as well as during aggressive cornering.

Love those wheels!

Are they HRE's?

What size are they, you mentioned a couple in your post are they 20"s?

Thanks!

[Rodknock]

If you want low you should go for the H&R's I have the rears all the way down and the front has about an inch left.. I tuck tire on all 4 corners..

[AndreNY]

^^^ your car looks SICK dumped like that but you need some nice 19's and your all set

Andre any updated pics of your ride? Im kinda stoked to see what it looks like now.

i have the RS6 reps, which will be gone next week and replaced with some new 19's
im rocking FK adjustable coils i have about .5" left in the rear and 2.5" to go in the front

[DeanUW]

Stasis Street Sports and I'm tucking tire on all four corners. I still have another 3/4" to play with in the rear and another 1.25" in the front. I'm on 19's too so if you were on smaller wheels it would look even lower:

[Dodge2Dub]

Love those wheels!

Are they HRE's?

What size are they, you mentioned a couple in your post are they 20"s?

Thanks!

No, they are VMR 710's.

They are 19x8.5.

[Dodge2Dub]

Y'all should post your ground to fender measurement for some consistency. I am 24.75" in the front and 25" in the rear

[DeanUW]

I think I'm 24 3/8 in the rear and 24 5/8 in the front last time I measured

[RAudi Driver]

Love those wheels!

Are they HRE's?

What size are they, you mentioned a couple in your post are they 20"s?

Thanks!

HRwannabeE's

Sorry Charles, I just had to go there.

[channad]

^^^^^ hahahahhahaha