No power to front door-switches don't work

[Kid Red]

(I cross-posted in the telematics forum, but not sure if this might be a better area)

I took off my door panels to adjust my crossover settings for my front speakers and when I put everything back together, nothing on the driver door works. Windows, locks, trunk, gas, door light, etc. Nothing work. I checked the fuse for the front door, it's fine (switched with another fuse also). The back doors work fine. But the front driver and passenger (which I also took apart) do not have button functions. I made sure the plug (on the drivers side) was connected correctly. I'm about to verify the passenger side plug though I don't see how that would affect the driver side.

Any other ideas what could be happening? I have zero power to my front doors and no switches work.

[SEXICÄN]

did you blow a fuse?

[Kid Red]

No I checked.

However, update- the wife asked if I "blew into the plug?" Strange enough, I plugged and unplugged 2-3 times, then I decided to blow into the plug and reconnect it. The passenger suddenly door had power! Then I tried the driver door, first reconnecting and yanking with no results. I hesitantly blew into that plug and reconnected. Voila! The driver door worked. I can't explain it, but crisis averted.

I will never mock my wife again :)

[Quattro]

^^prove her wrong, take to dealer and get a new part! haha

but that is strange, I always tell the girls I date "blowing (my plug) will solve a few problems"

but seriously, get a new plug