VMR Sport | B5/B6 Audi A4 Stainless Steel Test Pipe Turbo Downpipe

[VMRSport]

BRAND NEW STAINLESS STEEL TEST PIPE
Made for 1996-2005 Audi A4 1.8T

If you are interested in ordering, you can send payment ($89.99 dollars plus $12 dollars for shipping, within the US) via paypal. Our paypal address is: [email protected]

In the notes/comments section, include a link to this thread, so that we know what the payment is for, and also include what car it is for and what part you are ordering.

Price is $89.99 plus $12 dollars for shipping, within the US

Fitment Information:

Audi
1996-2005 Audi A4 1.8T
Fits Manual and Automatic Transmissions
Fits Quattro and non-Quattro vehicles

You are viewing a brand new test pipe made specifically for the B5/B6 Audi A4. This test pipe is designed to bolt on and replace the stock catalytic converter**.


Benefits:

- Uses a 2.5 inch inner diameter pipe
- Removes exhaust backpressure caused by the restrictive catalytic converter
- Increases efficiency of the turbo
- Increases lower end Torque
- Allows for higher sustained boost pressure
- Allows for faster throttle response
- Provides sufficient flow for up to 450hp
- Flanges have been casted and welded both inside AND out to assure long term durability

Includes:

- Fully-Polished 304 Stainless Steel Pipe
- High Quality Stainless Steel Nuts and Bolts
- Test Pipe-to-Downpipe Gasket
- Downpipe-to-Turbo Gasket (other test pipes do NOT include this piece)
- 1-Year Limited Warranty***

** Since this test pipe replaces the catalytic converter, it will cause you to fail smog. It is designed for off-road use only. It may not be legal to use this item on public roads, so please check with your local smog regulations.

*** Warranty is limited to all workmanship and durability of the product.


Price is $89.99 plus $12 dollars for shipping, within the US


If you guys have any questions or need help with anything, let me know.

thanks.

-Don

[email protected]

[vinny.dtw]

Does this bolt on to the stock downpipe?

[greyturbo]

yuppp

[F16HTON]

You have this posted in the B6 forum and are stating it wil fit 1996-2005, the picture and description is for a >2005.5 2.0T FSI.

Do you have a photo of the 1.8T logitudinal test pipe?

[VMRSport]

You're right. I typed in the wrong html address for the pictures.

They have been adjusted now.

thanks.

-Don

[VMRSport]

Thanks for the orders guys.

All orders should be getting processed today and shipped out over the next couple of days.

Let me know if you guys have any other questions.

-Don

[F16HTON]

Wrong gasket pictures.

[VMRSport]

Heh, you're right.

-Don

[VMRSport]

PMs replied to.

-Don

[VMRSport]

PMs replied to.

-Don

[VMRSport]

Thanks for the orders guys. All of the orders placed today will be processed and shipped out monday/tuesday of next week.

-Don

[VMRSport]

PMs replied to.

-Don

[VMRSport]

PMs and e-mails replied to.

-Don

[VMRSport]

PMs replied to.

-Don

[passatkid]

Just wondering why this one is so much more then the on for the b7 the only difference is the flange, is there a 32 dollar difference in the flanges.

[yung turbo]

i want one for the b6 but because it is 2.5inches wouldnt this have the step right at the turbo because of the hotside turbo exit being close to 3inches?

[VMRSport]

The price difference is partially due to construction/manufacturing and management's decisions on what to have it priced at. Various things are taken into account, such as what was already listed above, including quantity/amount that we are able to get, etc, etc.

Our test pipes will bolt up to the stock exhaust components.

Let me know if you guys have any other questions.

thanks.

-Don

[ballinb6]

i will be buying one of these hear shortly

[VMRSport]

PMs replied to.

-Don

[VMRSport]

PMs replied to.

-Don

[yung turbo]

i want one sooooooo bad but im broke on cash.

[absolutegtr]

i want one sooooooo bad but im broke on cash.

bought mine for $102 and then sold my converter for $90, sooooooo

[VMRSport]

bought mine for $102 and then sold my converter for $90, sooooooo

Win-win, haha.

[yung turbo]

bought mine for $102 and then sold my converter for $90, sooooooo

im in ny were emissions are tested every year so i need to swap in when its time.

[[email protected]]

bought mine for $102 and then sold my converter for $90, sooooooo

How did you sell your converter? This sounds like a good deal.

[Trev]

Just sent payment

Cant wait to get it in.

[VMRSport]

PMs and e-mails replied to.

-Don

[VMRSport]

PMs and e-mails replied to.

thanks.

-Don

[trueno429]

how much hp/tq is expected for gain? any dyno sheets?

[VMRSport]

No dyno sheets, but it is expected to get gains anywhere from 5-15 hp/tq, depending mods/tune/etc.

-Don

[aalipio]

The price difference is partially due to construction/manufacturing and management's decisions on what to have it priced at. Various things are taken into account, such as what was already listed above, including quantity/amount that we are able to get, etc, etc.

Our test pipes will bolt up to the stock exhaust components.

Let me know if you guys have any other questions.

thanks.

-Don

any noticable gains coming from stock vehicle?
i want one

[VMRSport]

I thinking it'd be around 7hp for a stock car.

-Don

[KareemA4]

What about on a chipped?

P.s. I already had my shop order 1 for me.

[VMRSport]

Sorry for the late reply. It depends on your tune, and what other mods you have. I would assume closer to 11-13hp for a chipped car with mods.

-Don

[VMRSport]

Thanks for the orders guys.

Orders made on monday/tuesday were shipped out yesterda.

-Don

[02A4_B6]

heard you were sold out......any available yet?

[VMRSport]

Nope, these are sold out with no ETA on when they will be back in stock yet. Check out our heat shielded test pipes. They are a bit more expensive, but still reasonably priced with other available test pipes out there.

-Don

[02A4_B6]

no thanks. like the space saving of the normal plain pipe. no offense but how can you sell a product that has always been in demand and not keep a current stock or even know when u will have them?