ER SMICs for B5 S4, Ready to SHIP NOW (Been waiting since Feb, now here!!)

[jaybquick@JHM]

Ok guys, the group buy I started back in Feb and the order I placed with ER back then is now getting ready to start shipping starting next week 9-1-08. $1300 per set. $95 off retail!!!!!

Here are my orginal group buy threads I was talking about --> http://www.audizine.com/forum/showthread.php?t=190231 and http://www.audizine.com/forum/showthread.php?t=190233

The SMICS will start shipping next week. I have already 3 sets sold (the people I pm'd and emailed that contacted me direct previously).

So now the rest are available first come first serve NOW. I recommend buying ASAP before I sell out on this batch.

If you buy the CF Shrouds with your Kits now they are only $200 but may not ship for a week or 2 after you get your SMIC kits. If you order your SMIC shrouds later and bought your SMICs from me they will cost $225 plus shipping. If you need SMIC shrouds and didn't buy your SMICs from me the shrouds are $250.


Go here to our NEW secure store to buy your set and lock it in NOW! Our new store can give you a shipping quote and bill you out in ANY COUNTRY, so there is no need to email us for a shipping quote, just make an account and put the items you want in your cart and begin checkout. If you want to place the order then move forward with the purchase.

http://www.jhmotorsports.com/shop/ca...products_id=56

Don't forget to select your trans type and if you want shrouds or not when you order. The new store will do all the shipping estimates for you at check out. Please use FedEx only for these. USPS is a pain to deal with for items at such a high value.

I will be posting how many are left once the first several sets are sold.

Thanks everyone.


NOTE: This is our new store and is not linked to in any other way so save this URL. It is not fully populated with all our new products but feel free to buy other stuff on our site. You are one of the first few to see it. It should be launched really soon officially once we get the rest of the products on it.

[jaybquick@JHM]

About half the sets are sold. Still some left.

Thanks to all of those who have ordered thus far.

[jutny]

i ordered jay (on thursday or friday, via my blackberry, did you get the order?), glad this all worked out right when i needed them too!

[gointoscott]

If I can raise enough money for "Get Scott some ER's fund" I'm hoping to put an order in But as of right now I have other things I have to throw my money at.

These look great though!

[epyx]

I hope to be ordering a set tomorrow or wendsday

[jaybquick@JHM]

Thanks again for the orders. I have 5 sets left now. (maybe more if another shop bails on a set or 2) cross our fingers.

I also may have extra shrouds left over from my orders (from those who opted out of the shrouds, I ordered enough shrouds for all the kits) if any one wants them for their current ER SMICs.


I will keep you updated as the orders progress. I am hoping that the first set or 2 can ship out this week.

[AudiSportB5S4]

do you accept trade ins from AWE's lol.

[Dowskeet]

Do you accept kidneys? I hear they go for a pretty penny..

[epyx]

Ordered today

[jaybquick@JHM]

do you accept trade ins from AWE's lol.

Unfortunately no. Out here in CA I only put ERs and my FMIC on customers cars. AWEs work good but with 100 degree summer temps they just don't cut it these days.

Do you accept kidneys? I hear they go for a pretty penny..

I still have both otherwise I would consider, that way I would have a spare again. HAHA.

Ordered today

Thanks for the order.

[jaybquick@JHM]

UPDATE ON AVAILABILITY AS OF 9-03-08.

I was going to have only 2 more sets left, but I contacted ER to see if another dealer backed out of any sets. Well if I can buy it up soon, I will have a TOTAL of 3 SETS available for you guys.

[jaybquick@JHM]

UPDATE ON AVAILABILITY AS OF 9-08-08.

Only 2 sets left.

[BB2001S4:Tim]

How many charged rows are there? Where there 2 different models made?

I count 15 in this pic


But count 12 here:


Im not sure if Im counting the right thing but one does seem to have more than the other.

Are the widths of the charged row different?

[jaybquick@JHM]

How many charged rows are there? Where there 2 different models made?

I count 15 in this pic


But count 12 here:


Im not sure if Im counting the right thing but one does seem to have more than the other.

Are the widths of the charged row different?

Good eye. The first pic is the most recent of them taken by me personally. The other pic with them installed is from when they were in their prototype phase with ER. So yours would look just like the top one.

Hope that clears it up.

[BB2001S4:Tim]

were there any differences in deltas between the 12 row and the 15 rows?? Im assumming there was...

Were the two core sizes the same but just narrower and wider rows that fiffer between the 2?

[jaybquick@JHM]

were there any differences in deltas between the 12 row and the 15 rows?? Im assumming there was...

Were the two core sizes the same but just narrower and wider rows that fiffer between the 2?

I would assume so, since Fred @ ER spent a lot of time developing these. They have been out for over 2 years so the 15 must be better if that is what they switched to. I have seen all the ICs out there on cars and these are by far the best side mounts in raw performance and keeping IATs down.

[jutny]

mine showed up today, they look great!

[Illusive90s]

mine showed up today, they look great!

Were you part of the group buy, when did you place the order?

I'm very anxious to get mine.

[jaybquick@JHM]

Were you part of the group buy, when did you place the order?

I'm very anxious to get mine.

I gave Fred @ ER the list of people in order to be shipped based on the date of payment. 2 went out last week. Hopefully more this week and more the following week.

The people who ordered shrouds are being held up since the shrouds are not done yet and I have a line of 12 people already for those.

Trust me as soon as they are ready they are coming straight to you, not even to me. Straight from ER to save time.

Thank you everyone for your patience. I ordered these back in Feb.



UPDATE: Still only 2 sets of SMICS left as of 9-10-08 and 4 sets of shrouds left as of 9-10-08.

[Illusive90s]

I'm not worried Jay, I was just wondering how soon I'd see them.

[jaybquick@JHM]

I'm not worried Jay, I was just wondering how soon I'd see them.

If you still live in CT I am pretty sure I know which order is yours and the hold up is the shrouds because a couple more without shrouds went out today. So any day now man. ER is waiting to ship the SMICs that come with shrouds so they don't have to eat extra shipping from what I can tell.

You are one of the top ones with shrouds. Thanks.






FYI. If anyone wants to order some Without shrouds they will be able to ship out as early as tomorrow.

[Illusive90s]

Yes I'm still in CT. I'm like a little kid waiting for Christmas presents when I order parts; I know that I have to wait, but knowing that I'm getting something makes me excited and eager to get them.

[fatezero]

Jay, any word on the shrouds yet?

[jaybquick@JHM]

Jay, any word on the shrouds yet?

If you have paid already we have a group of 15 or so that will be shipping out from ER at 5 units a week really soon. They will come straight from ER to you so there will be no delays.

If you have not bought a set yet go to our store and lock them in. I have like 2 sets of shrouds left.




UPDATE: We got 1 set of SMICs left from this batch, so order up on our site to lock your set in to ship out soon. May have more if another dealer doesn't buy all their reserved units, but don't plan on it.

[fatezero]

ok, thanks for the update. I am picking them up and I can't put in my IC's until I got them.

Someone better get this last set of IC's while Jay has them. It will be like a long te until more come

[jaybquick@JHM]

ok, thanks for the update. I am picking them up and I can't put in my IC's until I got them.

Someone better get this last set of IC's while Jay has them. It will be like a long te until more come

No problem man. Still sitting on 1 set I have available.

[Illusive90s]

Can I haz update ploz?

[jaybquick@JHM]

Can I haz update ploz?

ANY orders without shrouds are going out just about the same day right now.

I did sell the last set but fred @ ER informed me I have access to more. So feel free to order in our store to lock yours in.



UPDATE ON SHROUDS, this is holding up shipping the complete sets:

Looks like Fred @ ER was expecting them to go smoother than it has when he told me to start selling them several weeks ago. Either way at least the people that have bought will have a set locked in from the first batch One side is ready to be fully produced at 5 units per week. They are having to make adjustments on the other mold for the other side. So as soon as the other mold is finalized they will start shipping. I know our group of buyers (JHM) should be 2nd on the list. So as soon as they are made they will be drop shipped straight to you.


Here are some pics I received this morning from Fred @ ER of the one shroud ready to go. They look sick.

[cleveland222]

Can't say enough wonderful things about these ICs. I absolutely love mine. Jay's service is second to none as well.