Anyone have a problem with AWE boost gauge/t fitting

[OneBadAudi]

I had one of those advanced auto fittings on, it read correctly but it was very jumpy, so i call awe and get the non buzz fitting, now my boost gauge is reading 12 psi at idle on vacum...when i floor it, it goes to 15 psi boost, which i know its supposed to read 18 n peak more , then i shift, sticks, then drops back down, I know im pushing more then that but something is screwey...Anyone ever experience this...I have checked the vacum lines and they are all good.

[A4TUNE]

i think my t-fitting is leaking boost. its a shitty little plastic piece. sometimes it flutters but usually the needle just stays at 16psi.. is that low for revo ?

[Alex/AWE]

Hey guys. Do me a favor and email me at [email protected]. Let's get this all figured out!

[OneBadAudi]

i think my t-fitting is leaking boost. its a shitty little plastic piece. sometimes it flutters but usually the needle just stays at 16psi.. is that low for revo ?

seems low but i dont know anything about Revos tune, I know Giac 1+ is supposed to peak 21 psi and hold about 18psi, which it did with the crappy t fitting, but it was bouncing all over the place..

[DUDEFROMRI]

I e-mailed AWE cause my T-Fitting was cracked. They sent me out a new one that day... They have pretty Good customer service..

[OneBadAudi]

yeh i tried emailing them today but no answer....Guess they are pretty busy...hopefully i will hear back from them sometime this week.

[Alex/AWE]

yeh i tried emailing them today but no answer....Guess they are pretty busy...hopefully i will hear back from them sometime this week.

I got your e-mail but didn't get a chance to respond just yet. I'll be sure to take care of it tomorrow when I get back to work.

[A4TUNE]

I e-mailed AWE cause my T-Fitting was cracked. They sent me out a new one that day... They have pretty Good customer service..

actually i agree with that, their customer service is excellent. i'll need to talk to them about that t-fitting because it is pretty flimsy and on the verge of leaking.

[quat]

Same thing happened to me, My vacuum with the original T fitting was 19. then that one cracked and AWE sent me a new one, not Im at 10. but sometimes it will go to 21 in-Hg vacuum.

[OneBadAudi]

im starting to think the gauge may be bad, but i havent seen a gauge go bad...Anyone ever have a gauge issue?

[OneBadAudi]

I got your e-mail but didn't get a chance to respond just yet. I'll be sure to take care of it tomorrow when I get back to work.

no rush man, take your time