What's best for glass?

**dustind** · 08-27-2008 01:25 PM

Does anyone have a good recomendation for a glass cleaner? I've tried windex and a mix of alcohol + distilled water, but nothing takes off the water spots. Looks really bad on the opensky roof of my A3.

**le91688** · 08-27-2008 01:28 PM

windex?

**dustind** · 08-27-2008 01:55 PM

Tried that. It sucks!

**Twista616** · 08-27-2008 06:24 PM

If your just using it on glass, try some cleaner wax..it has taken water spots off for me...then go over it with a glass cleaner like Stoner Invisible Glass. Hope it helps!

**heateris** · 08-27-2008 08:22 PM

stoners ftw!

**DetailersDomain** · 08-27-2008 09:38 PM

how about Adam's Glass Cleaner or Lusso Glass Polish.

also try our Uber Glass MF's.

**Cycopath** · 08-27-2008 11:33 PM

while i was buffing my car today, i hit the windows with the PC and a mild abrasive and yellow pad. then added a polish and they look great

**Jetta** · 08-28-2008 05:56 AM

I have tried all kinds of stuff, but found that Adams glass cleaner and a microfiber towel does the best job. Seriously, its the only time I have ever been able to clean glass and end up with no streaks or spots left, and it has no ammonia so it is safe for tinted windows, unlike windex.

**SilverThing** · 08-28-2008 07:47 AM

Originally Posted by Jetta

I have tried all kinds of stuff, but found that Adams glass cleaner and a microfiber towel does the best job. Seriously, its the only time I have ever been able to clean glass and end up with no streaks or spots left, and it has no ammonia so it is safe for tinted windows, unlike windex.

^^^^X2 - the Adam's stuff w/ a mf towel works really well - am very impressed with end results - and really like the fact that it has no ammonia. "Try it, you'll like it..."

**boravr6** · 08-28-2008 08:12 AM

Microfibre is the only way to go for glass!

I dont even use any cleaner... i just use my damp shammy when im done wiping the car down and just pass over the glass, then i dry the window down in a buffing style motion. No streaks or spots.

MF for the MF'n win!

**dustind** · 08-28-2008 08:52 AM

Well I already use an MF on the glass, but I've had no luck buffing them out by hand with just that. I was looking at the Einszett polish and the Adams cleaner already but it sounds like I should give those a try. I'm don't have a PC or other rotary setup yet so I'll hold off on the buffing suggestion. Thanks for all the great comments.