Suspension Question

[b6quattro]

Alright so I am about to have an s4 sway, sport springs and hopefully I can come up with either sport shocks (hard to find used!) or comparable shocks in the near future... Now my question is when I get all of these parts and I go to install them... Will I need to purchase the sport bump stops? Or can I use my non sport bump stops and cut them? Can anyone give some help on how to cut them and what exactly needs to happen... ALSO, which is better? cut or sport bump stops? Sorry for all of the questions...

I am have searched and I really can't find the answer... Any insight is much appreciated! Thanks so much for your help guys!

Shane

[old guy]

Either way will work just fine. If you cut the stock bump stops just cut out the middle "roll" and epoxy the two sections stop back together. I cut my rear stops and epoxied them back together in '03 and they are still together 100K later.

Cheers!

[b6quattro]

Either way will work just fine. If you cut the stock bump stops just cut out the middle "roll" and epoxy the two sections stop back together. I cut my rear stops and epoxied them back together in '03 and they are still together 100K later.

Cheers!

Awesome, sounds easy enough for me. thanks the reply!