Im Back!!!! Another Wagon in the works!

[Audi Skate Snow]

I finally found a car that I want and I am picking it up on wednesday or thursday of this week!

Of course its another wagon but this time in white! its not a USP but I will be doing the conversion for sure.

By end of the month the motor is going to get pulled and block is going to get sent to the machine shop.

What I will be doing in next couple months.
2.0 Stroker
2.0TFSI Crank
Scat Rods W/20mm wrist pins
Piston yet to be determined....however they will be 82.5 piston

for the Head I am up in the air about as of now...but it will be checked when apart for any leaks, cracks etc...check all valves.

Turbo... Im going 3076 with full race maniold (thanks greg)
Most likely running the 630cc injectors and going to try out a couple tunes to see what works best.

Thats all the info I can think of for now...of course the car will have all the other bolt ons, wheels, suspension blah blah blah!

Cant wait to have another fast wagon!:)

[Audi Skate Snow]

oh...

p.s I hate my 335

[Audi Skate Snow]

p.s.s IM the only idiot to buy the same car twice.

[A4 TSCHUSS]

O SNAP, he is officially back with a plan!

[F16HTON]

Maybe I think Chuckie may be giving a class on how to do it right the first time (or second for him)

[Audi Skate Snow]

Maybe I think Chuckie may be giving a class on how to do it right the first time (or second for him)

ahah ya... this one is going to be done the right way. not even sticking with the 1.8 this time.... going for the gusto!

[HTA A4]

Nice! Can't wait to see the project progress!

[absolutegtr]

Wasnt around AZ when you had your first car, but you seem to know your shit.

Definetly looking forward to this project

[youngspeed]

what software? Unitronic?

[F16HTON]

Wasnt around AZ when you had your first car, but you seem to know your shit.

Definetly looking forward to this project

Charlie knows dick!

[Audi Skate Snow]

Charlie knows dick!

greg you know my dick in your...... well you know...its only gay if you cum right.?

[B6Lovin]

what software? Unitronic?

if he's smart he'll say yes hahaha.

but according to greg, he knows dick
and according to charlie, greg.... well he's married so we'll assume the best

[Audi Skate Snow]

if he's smart he'll say yes hahaha.

but according to greg, he knows dick
and according to charlie, greg.... well he's married so we'll assume the best

ahahah... Yea as far as the software... im going to try a few different ones.

[Exanimas]

greg you know my dick in your...... well you know...its only gay if you cum right.?

.............

Yea, anyways, welcome back. I'm sure the car will be incredible when you get everything listed in your plans done. Congrats (for a second time I believe).

[B6Lovin]

im going to assume (based on your vagueness) that you're not dropping names until you actually give the different tunes a shot?

[Audi Skate Snow]

im going to assume (based on your vagueness) that you're not dropping names until you actually give the different tunes a shot?

nah no secrets... im just going to try em all until i get one that im satisfied with :)

[Audi Skate Snow]

.............

Yea, anyways, welcome back. I'm sure the car will be incredible when you get everything listed in your plans done. Congrats (for a second time I believe).

ahahah, yea back to the old days of me and greg messing around back and forth, but its all fun and games!

Thanks man, appreciate it!

[audi808a4]

welcome back!

[bananas]

Good Lord, Paint Those Lowers!

[Jibberific]

p.s.s IM the only idiot to buy the same car twice.

I've done it. My last car was also a b5 avant but it was a different color.

Anyway have fun with the build, i'd sure like to do the same with my car.

[Audi Skate Snow]

Good Lord, Paint Those Lowers!

ahahah Bananas... of course you know those things are getting painted..

I posted in OP that im doing the USP conversion.. Car will look good when im done.... I hope :)

[RAVI]

nice to have you back in the audi fam!

[B6Lovin]

nah no secrets... im just going to try em all until i get one that im satisfied with :)

that's AMAZING news!

you can finally end the debate on the ups and downs of each tune! you'll be the one who can eliminate all the other variables (minus the weather) and measure ONLY the effectiveness of various tunes.

I'm going to go ahead and beg you to atleast try REVO and Uni lol

[jrau13]

That's gonna be a great looking car in white. Love white cars! Can't wait to see this thing when its done.

[AudiA4Turbo22]

the guy who fought with a dude in an M3 and lied about the race gas, welcome back. it'll be badass when ur done. And i can hook u up qith a 2.0TFSI crank if u want PM me i got one laying around.

[Silence]

lame.

[XwalkerX]

just curious why you hate the 335?

good looking avant either way!

[Pr0n]

"You've got race fuel, Charlie, fucking liar."

[yoogene83]

hahaha

[sadpandas]

rad, i don't know any of that race crap you are speaking of up there but i like that you are back with a wagon. once you go hatch you never go back....i understand buddy. i understand.

p

[Maverick]

that's a rare find
white Avant!!!!

[[email protected]]

Welcome back Charlie

[dougyfresh]

And he's back!


Looking forward to the progress. Welcome back!



Avants FTMFW!

[Audi Skate Snow]

Thanks gang!

[Arclight]

Welcome back, can't wait to see the progress on your new car.

Why didn't you like the 335...

[mike-2ptzero]

Welcome back Charlie, glad you picked the Avant over that FWD car.

[dougyfresh]

What year is that Avant? Tan or Gray interior?


Why are you thinking 82.5mm bore versus 83mm or 83.5mm? Just curious.

[CO AVANT]

^^^why did you go with an 82.5mm bore then fvcker

I take it Cosworth is going to be building your motor Charlie? BTW, welcome back to the mix. Good to see your a certified tech now.....bet it's a tad different from your last job

[AudiA4_20T]

^^^why did you go with an 82.5mm bore then fvcker

I take it Cosworth is going to be building your motor Charlie? BTW, welcome back to the mix. Good to see your a certified tech now.....bet it's a tad different from your last job

Does Cosworth actually build motors? I have yet to see 1 "Cosworth built" motor... Pretty sure cosworth does machining and Ecode assembles shit...

1. Condos car was a "Cosworth motor" and was actually built by Ecode and failed
2. Ecode 28RS S4 was supposedly a "Cosworth motor" but was actually built by Marc and Frank @ ASP

[dougyfresh]

^^^why did you go with an 82.5mm bore then fvcker

I listened to BobQ and he was being conservative in telling me I should bore to 82.5mm so I have material left over for future re-bores (if necessary). He also had 82.5mm pistons in stock so my block could be machined the day after I dropped it off rather than a month or two later. I did everything I could to not have to wait 6+ months....

Guess its a mute point. 82.5, 83, etc.. Just a few ccs here and a few ccs there.