Audizine - An Automotive Enthusiast Community

Results 1 to 4 of 4

Thread: vacum reading

  1. #1
    Veteran Member Four Rings texasboy21's Avatar
    Join Date
    Apr 01 2007
    AZ Member #
    16891
    My Garage
    1983 Chevy Silverado
    Location
    houston texas

    vacum reading

    Guest-only advertisement. Register or Log In now!
    what should my boost gauge read at idle when the ac is cranked?? 20 when its off and what when on?

    barrett
    2019 SQ5 Prestige
    2016 S3 Prestige - Eurodyne Maestro ECU + TCU, REVO downpipe, air box mods, Bilstein B12 w/ EuroSport camber kit, 034 RCO + RSB
    2005.5 A4 2.0t "Stage 3" - Pag Parts rods/inlet pipe/FMIC/manifold/downpipe + Borg Warner EFR 6758 + Stasis cup kit + StopTech 332mm BBK + Eurodyne Maestro + Eurodyne Boost Manager Plus

  2. #2
    Veteran Member Four Rings jursch2211's Avatar
    Join Date
    Feb 05 2008
    AZ Member #
    24941
    Location
    Illinois

    Re: vacum reading

    I believe it depends on how strong your engine is. When I'm at Idle mine reads -22/23, then when the ac is on its between 18-20 depending on how high I have the ac blowing. Hopefully I wasn't told wrong and there is actually something wrong with my car. I don't need anymore problems.

  3. #3
    Veteran Member Four Rings CO AVANT's Avatar
    Join Date
    Feb 12 2004
    AZ Member #
    368
    My Garage
    '03 B6 Avant, '15 B8 A4, '14 S8, '15 Duramax
    Location
    Everywhere

    Re: vacum reading

    Also depends HIGHLY on ambient conditions and elevation. If you are in vac -20hg with ac off then it will be around -15/-16hg with ac on.

  4. #4
    Veteran Member Four Rings texasboy21's Avatar
    Join Date
    Apr 01 2007
    AZ Member #
    16891
    My Garage
    1983 Chevy Silverado
    Location
    houston texas

    Re: vacum reading

    thanks fo rthe input

    barrett
    2019 SQ5 Prestige
    2016 S3 Prestige - Eurodyne Maestro ECU + TCU, REVO downpipe, air box mods, Bilstein B12 w/ EuroSport camber kit, 034 RCO + RSB
    2005.5 A4 2.0t "Stage 3" - Pag Parts rods/inlet pipe/FMIC/manifold/downpipe + Borg Warner EFR 6758 + Stasis cup kit + StopTech 332mm BBK + Eurodyne Maestro + Eurodyne Boost Manager Plus

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.