Eliminate Drivetrain Slop - A.W.E. Tuning Drive Train Stabilizer Bar

[Alex/AWE]

The A.W.E. Tuning Drive Train Stabilizer (DTS) bar is In Stock and Ready To Ship!



The DTS is made of T6-6061 aircraft aluminum and utilizes a high durometer rubber bushing. The entire unit is a lightweight 6 lbs and will fit without clearance issues with any exhaust system currently on the market. 100% fit, 0 vibrations.

The AWE Tuning Drive Train Stabilizer (DTS) eliminates the excessive engine and transmision torsional movement found in these vehicles. The results are phenomenal throttle response, crisper and more precise shifts, and more power to the ground.





For more information regarding our DTS bars, as well as pricing information, please visit our website: http://www.awe-tuning.com/page...WEDTS

If you have any questions, please don't hesitate to contact me,
[email protected]

[bigmerle]

No Avant love.....

[oc-drop]

They are only for manual trans right?

[KfabR8]

by chance would these fit on an RS6???

[stevea6/z28]

They are only for manual trans right?

yup, we gets no love

[stevea6/z28]

by chance would these fit on an RS6???

no only for manual

[Gigi]

I wish I could get something like that for my TIPSLOWnic

[Alex/AWE]

No Avant love.....

You know, I'm pretty sure it will work for the Avant. Let me check into it on Monday and i will let you know.

They are only for manual trans right?

Like Steve said, the DTS will only work on cars equipped with a manual transmission.

by chance would these fit on an RS6???

Unfortunately the DTS will not work on the RS6.

[bigmerle]

You know, I'm pretty sure it will work for the Avant. Let me check into it on Monday and i will let you know.



Like Steve said, the DTS will only work on cars equipped with a manual transmission.



Unfortunately the DTS will not work on the RS6.

If it only works for manual.....that kills any thought of Avant love

[HOFFY11]

sounds like a waste of money..if it was really needed it would have come factory..i would second guess that theory if it were on a honda but not an audi.

[HOFFY11]

but i do still love awe =]]

[jon c]

I'm pretty sure this is extremely helpful in regards of reducing driveline slop when getting on and off the gas.

I have this on my A6 and compared to a stock one, it's a significant change

[Daft]

If it only works for manual.....that kills any thought of Avant love

Why? Weren't Avants available in stick?

[iconoclast]

sounds like a waste of money..if it was really needed it would have come factory..i would second guess that theory if it were on a honda but not an audi.

what~!? seriously wtf are you saying?

[iconoclast]

The A.W.E. Tuning Drive Train Stabilizer (DTS) bar is In Stock and Ready To Ship!


If you have any questions, please don't hesitate to contact me,
[email protected]

i had one of these on my b5 s4, and i am curious if you currently have anything similar for a b6 s4 6speed.

[bigmerle]

Why? Weren't Avants available in stick?

Naaaa C5 A6 Avants are all tip in the states.....sad sad sad

[jon c]

you could get the allroad with a 6speed 2.7t

[Affinitive]

I'm surprised you guys aren't pimpin this thing out along with some new upgraded tranny mounts of some kind and a upgraded front torsion mount or snub mount as some call it.

And where's the 5HP19 love. I mean c'mon, all it takes is to modify the the center support bar to clear the pan and mount it to the transfer case similar to how you guys are doing it with the manual. I think the 5Hp24 strapped to the 4.2's might be a little tuff though, them things are big b!tches.

C

[white fish]

hey is it the same part for the S4 A6 and allroad
as long as its 6speed?

[Alex/AWE]

sounds like a waste of money..if it was really needed it would have come factory..i would second guess that theory if it were on a honda but not an audi.

I'm going to respectfully disagree.

You could say the same thing about anything any of us add to these cars to enhance the driving experience. If your S4 (or any other car) really needed a bigger sway bar/coilovers or a bigger turbo, it would have come equipped with it from the factory.

I know there are plenty of avid car enthusiasts who don't enjoy modifying their cars, they simply enjoy the fact of driving, but there are also plenty of us who enjoy adding parts to enhance the experience. Sure these cars might not NEED a DTS, exhausts or anything else available through the aftermarket, but that doesn't mean they don't enhance the driving experience.

but i do still love awe =]]

Appreciate it man! Good luck on with your A6. Be sure to keep posting up pictures.

Naaaa C5 A6 Avants are all tip in the states.....sad sad sad

Doh! Come on Audi! Since the Allroad was available with a manual, I wasn't sure if Audi made a small number of C5 A6 Avants with a manual. Would be a pretty nice combination in my opinion.

i had one of these on my b5 s4, and i am curious if you currently have anything similar for a b6 s4 6speed.

We do not. It's only for the B5 and C5 platforms.

hey is it the same part for the S4 A6 and allroad
as long as its 6speed?

The DTS bar itself is the same for all the cars. For the allroad we include two adapter plates that are needed to clear the downpipes.

[white fish]

adapter plates ??
could I have some pics?
is the same shape as the ends?

[bigmerle]

Doh! Come on Audi! Since the Allroad was available with a manual, I wasn't sure if Audi made a small number of C5 A6 Avants with a manual. Would be a pretty nice combination in my opinion.

I couldnt agree more...at least give us the 2.7t in tip

[Josh/AWE]

THREAD RESURRECTION! A few finished Drive Train Stabilizers, all made in house here, courtesy of our team of fabricators.