Ok I replaced my passenger side axle and upper control arms. The control arms were shot and the cv joint went so just picked up a new axle. It was driving fine drove it for about 50 miles no issues...
I get in the car this afternoon drive home still good. I park for about 20 mins get back in the car and head out. I push in the clutch and feel a vibration when the pedal hits the floor. Felt really weird.. I pull away.. Shift got through gears till about 4th with that odd feeling in the clutch. It was getting alot harder to shift as well. I had the muscle the car into gear. Then the feeling in teh pedal went away. I was in 5th driving ok. I get to a light BAM!! I could not get the car back into gear. I shut the car off I am not making friends at this point on the road. I was able to put the car into gear with the car off and i start out in 2nd i was unable to shift the car into 3rd. WTF!!!!!
I get to a parking lot and look to see if i have any fluid leaking or my reservoir is empty it was full and no leaking fluid. I am lost....
Is it my Slave Cyl? Master Cyl? I don't think it's the clutch cause the car drives when i gear... I is not allowing me to go in and out of gear so thinking something hydraulic. Can anyone point me in a direction here? I am really going nuts this is already been a very expensive month with this car.
Thanks alot.
Bookmarks