Audizine - An Automotive Enthusiast Community

Results 1 to 11 of 11
  1. #1
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Official CEL codes need assistance!

    Guest-only advertisement. Register or Log In now!
    Alright codes are as follows please help a brotha out here!

    P0441: EVAP purge incorrect flow(no vac leaks, changed N80)

    P0229- turbo/super charger Boost sensor (A) Circuit: under boost


    is it the boost sensor though?? please help!


    In other news raced a 4 door Civic SI with APR 1+ and got whooped by like 10 cars!!!

    Oh and i started my own Audi GTG in Socal lol!
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

  2. #2
    Active Member Four Rings A4ringedONE8T's Avatar
    Join Date
    Feb 17 2005
    AZ Member #
    5337
    Location
    Sarasota, FL

    Re: Official CEL codes need assistance!

    EVAP purge incorrect flow is probably a bad check valve, oddly enough though I took all that shit out of my car and never get a single EVAP code. A loose or bad gas cap seal can also cause EVAP CEL's\

    What was the rest of the boost sensor code? FYI boost sensor = MAP sensor under the drivers side headlight

  3. #3
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Re: Official CEL codes need assistance!

    printed the receipt out of the Launch scan tool here we go:

    P0229- turbo/super charger Boost sensor (A) Circuit: under boost

    will edit orig. post.
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

  4. #4
    Active Member Four Rings A4ringedONE8T's Avatar
    Join Date
    Feb 17 2005
    AZ Member #
    5337
    Location
    Sarasota, FL

    Re: Official CEL codes need assistance!

    WTF, clear that shit and see if it comes back, doubt it will.

  5. #5
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Re: Official CEL codes need assistance!

    ^^guaranteed my car hates me last week i got a CEL for o2 sensor S2 high resistance i give up!
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

  6. #6
    Active Member Four Rings A4ringedONE8T's Avatar
    Join Date
    Feb 17 2005
    AZ Member #
    5337
    Location
    Sarasota, FL

    Re: Official CEL codes need assistance!

    What software do you have? High resistance usually means the heater circuit is bad. Should have said B2 S2? Thats the rear 02 sensor FYI

  7. #7
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Re: Official CEL codes need assistance!

    ^^figured APR 1+, the car doesn't boost right either it hits 19 PSI but by 5k RPM's i'm at 12!
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

  8. #8
    Active Member Four Rings A4ringedONE8T's Avatar
    Join Date
    Feb 17 2005
    AZ Member #
    5337
    Location
    Sarasota, FL

    Re: Official CEL codes need assistance!

    Quote Originally Posted by AudiA4Turbo22 View Post
    ^^figured APR 1+, the car doesn't boost right either it hits 19 PSI but by 5k RPM's i'm at 12!
    12-13 past 5k is all the K03's can do, thats not out of the ordinary. Do you have the test pipe file?

  9. #9
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Re: Official CEL codes need assistance!

    ^^nope have a stock cap, i have a jaguar gas cap can i try that lol!
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

  10. #10
    Active Member Four Rings A4ringedONE8T's Avatar
    Join Date
    Feb 17 2005
    AZ Member #
    5337
    Location
    Sarasota, FL

    Re: Official CEL codes need assistance!

    Quote Originally Posted by AudiA4Turbo22 View Post
    ^^nope have a stock cap, i have a jaguar gas cap can i try that lol!
    Huh? Did you clear the codes and those returned? The codes you mentioned are completely unrelated BTW

  11. #11
    Veteran Member Four Rings AudiA4Turbo22's Avatar
    Join Date
    Dec 06 2007
    AZ Member #
    23140
    My Garage
    '03 Audi A4 1.8TQ Tip, '14 Mbz E63 S-AMG, '02 GMC Sierra Denali, '75 DJ5 Postal
    Location
    SoCal

    Re: Official CEL codes need assistance!

    ^^stock CATalytic converter, correction lol! last week i had 02 sensor high resistance code, cleared it and this is what returned!
    -Kirk
    AZ's First 2.0 Stroker 3076R Powered Tiptronic B6 Built by RavenMS. Powered by PSI Concepts & GIAC

    BetaAlphaTau Member #58

    "The last time someone tried to put GRAMMAR in their shit it caused a massive over boost and their motor shit the bed." - Turbavanttro

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.