Gsg Motorsports Fmic Groupbuy

[GhostSquadGarage]

Due to numerous PM's and requests we've restructured our GB to the following.

Here's what you get:
1. FMIC (27 x 6 x 3.5)
2. All associated piping (2.5") for seemless install, no modifications or cutting to bumper needed.
3. Temp sensor relocation bracket.
4. T-Bolt clamps
5. 4 Ply Silicone Couplers in Blue\Red\Black
Now, onto the pics:
6. Power Steering relocation\cooler

















NO MODIFICATION OR CUTIING of anything is needed to run this. It's a very easy and clean install (I always recommend a qualified shop if you're unsure of anything though)

FMIC

We're going to offer the following prices based on the size of the GB:

5 people - $1050
10 people - $940 + free shipping
15+ people - $900 + free shipping

Shipping is a flat rate of $35 for everything anywhere in the Continental U.S.

Sound Clips:
http://www.youtube.com/watch?v=_zY6DFJHfUE
http://www.youtube.com/watch?v=aXwz9uijAu4

[Cronogr]

Is ther any gains with this ? Can we see a dyno ?

[GhostSquadGarage]

Yes the dyno will be redone and up mid next week.
I had some unbelievable results with the 1st time I did it to the point I couldn't accept them as factual so I'm going to do an immediate before (then install the fmic) and do it again so all factors should remain the same between pulls.

[Quattro]

mmmm fmic =)

[Duce]

Is ther any gains with this ? Can we see a dyno ?

Not to speak for Jordan but after seeing the the first dyno. Which was a 40hp increase over stock because of the 106 degree day and heat soak of the stock front mount. I believe that is why you have not see other numbers yet. I would guess they are waiting for cooler day to get closer numbers? Even you know 40hp was crazy to see because of heat soak. Guess that's why i order 2.

[GhostSquadGarage]

I've got 6 on board !
4 more for the next stage of pricing :)

[GhostSquadGarage]

8 on board
2 more for best pricing !!!

Also some are still doing the GSG HEATSOAK special for $1200 for the fmic\cooler\intake pipe as part of the package.

[ExSRAaron]

awesome looking FMIC!!

[akordboy]

Great looking product. To bad its just for the B7 though.

[GhostSquadGarage]

Here's a soundclip of the FMIC combined with our intake pipe:

http://www.youtube.com/watch?v=_zY6DFJHfUE
http://www.youtube.com/watch?v=aXwz9uijAu4

[GhostSquadGarage]

Here's a flyby clip as well:

http://www.youtube.com/watch?v=_zY6DFJHfUE

[Quattro]

anyone have name of clip? Trying to load on my stupid iPhone

[BlackSpeed2.0t]

got the car being washed right now at the auto gallery.. they were a bit surprised seeing this roll up and a lot of customers who noticed began to stare.. few older men with there s4 or a8's were very curious.. thanks AGAIN JORDAN for the great product this thing is amazing sounds great and not to mention even the steering feels much firmer... much more responsive when its 99 DEGREES OUTSIDE ESPECIALLY WHEN YOU COMPARE IT to HEAT SOAK.. this is amazing i recommend it to all

[GhostSquadGarage]

9 people IN !!

1 more for $940 shipped !!!

[06B7audiA4]

I'm in, esp when it gets to the 900 +free shipping...

[GhostSquadGarage]

10 in !
940 shipped is the pricing !

[golfvdude]

Awesome price! Bike needs to sell so I can pick this up!

[GhostSquadGarage]

Got 11 now !!

[Quattro]

^^good stuff, 4 more and everyone gets a killer deal!

[Brent27]

whens the new dyno result going to be posted?

[GhostSquadGarage]

A guy in Washington was supposed to do his yesterday, so once he gets back in touch with me or posts in here you will have them.
It's a Auto\AWD\Revo Stage2

[Duce]

Sorry for the delay Jordan, I'm very new to forums. Well here is my dyno run stock Intercooler vs GSG Motorsports. Power was what i hope for even after hard runs the car still pulls. i notice better throttle response and up front power. I don't know much about Dynos but it did gain some power. There is no heat soak my main issue i was so worry about. Once again I'm down in El monte this weekend if you want to meet up Jordan and get a drink its on me. Thanks GSG Motorsports

[Subaru71]

whats the status right now? how many people are in?

[GhostSquadGarage]

11 as of now.

[Quattro]

gsg =

[Pete@IE]

If you want to see where a FMIC will really shine versus a stock SMIC, do three pulls with only a short cooldown (minute or two) with each, and post all 6. It'll become apparent that the SMIC becomes badly heatsoaked and power falls on its face.

Same reason all the old 1.8t's used to feel fast in the morning when you first pull out of the driveway, but like dogs in the mid afternoon heat after a few pulls.

[Laurence@GsG]

If you want to see where a FMIC will really shine versus a stock SMIC, do three pulls with only a short cooldown (minute or two) with each, and post all 6. It'll become apparent that the SMIC becomes badly heatsoaked and power falls on its face.

Same reason all the old 1.8t's used to feel fast in the morning when you first pull out of the driveway, but like dogs in the mid afternoon heat after a few pulls.

Thanks very true Pete. We have r32 project we are working on shoot me pm. So we can talk about doing some business together.

[Mr.Audi]

so what is the shipped price at right now???

[GhostSquadGarage]

^^^^^ $940 and 13 people thusfar. If you're in then that's 14 !!! ^^^^^

[Quattro]

good stuff almost 15 people!

[GhostSquadGarage]

Thanks GSG Motorsports

Oh NICE !!! I missed this post somehow ! hahaha
so it looks like 23tq \ 9hp over the stock ones.
Was that off the 1st pull or a few pulls into the dyno with the FMIC ?
I'm glad ambient temps and everything were the same as well so that doesn't play a factor at all in the graph. Nice work !

You ever figure out the shiftig clunking problem on the F150 ??

[Subaru71]

alright give me like a week or so to get everything together i should be able to join in on this :D

how long is this going on?

[GhostSquadGarage]

Ooooh you will make 15 and everyone else very happy !!

[Subaru71]

Ooooh you will make 15 and everyone else very happy !!

I was hoping so :D...

I woulda jumped on this one... but i wasn't planning on a fmic because there wasn't one out there that looks trustworthy.. and i dumped a lot of money on other parts of the car :(

but i think i can muster up 900... just need a little time

I'm also buying a new compressor, lift, and some tools.... so have to budget lol

[GhostSquadGarage]

Doing your own installs ? Nice ! I bet you're still ahead in $ even after the purchases.

It looks like that's ALL 15 !!!!

It will be $900 shipped on ALL ORDERS throughout the rest of the month !
This will end on September 30th at 23:59.
Get your payment in before that if you want in on this deal.

To those that have deposits or prepaid orders will be going out on Monday.

Currently Black and Red Couplers are on backorder with no official ETA so it's blue only for whoever is left.

[Subaru71]

lol if it isn't too long I'll take the rest of the kit and wait for the black couplers.. I need time to get all the piping powder coated anyway

but still.. give me 2 weeks or so..

[Quattro]

great stuff, 15 people!!! I know everyone will be pleased!!!!

[a4wd]

do you guys accept CC?

[GhostSquadGarage]

Yes ! Just give a call to order via CC on this groupbuy.

[Louis J.]

Jordan: a couple of Qs:

Have you tested the FMIC with a chipped car? The OE fuel pump seems to be operating at max capacity with a chipped car so I can only fathom the FMIC on a chipped car may trigger fuel cuts or require a high flow FP. Can you comment on this?

Also, does the car on the vid clips have the stock exhaust or aftermarket? If aftermarket, what brand? The exhaust on my car is as loud as I want it so I have to figure out how much louder the FMIC would make it.

TIA