what am i doing WRONG?

[G Men 08]

either i am doing somthing wrong or the bentley manual isnt all its cracked up to be... i just got it in and loaded it onto my computer... was playin around on it and today i plan on replacing the fuel filter and changing the rear differential oil...(waiting on the tool to do the tranny oil) and in my searches on this loveley program i was looking for the fuel filter replacement just for a reference and i cant find it anywhere on the system... and also came up empty on the changing of the rear diff oil... wtf gives?

[G Men 08]

i pretty much just wasted 75 bucs then

[doublezero30]

yea you did. you can get all those DIY's on here. free. check the DIY section!

[Condo]

i pretty much just wasted 75 bucs then

I wouldn't call it a waste of money. Have you tried entering your vehicle info and using the "Tech Info" tab to drill down to the info you need?

[G Men 08]

yeah... i finally found the info on the fuel filter.. i already knew how to change that i was just using it as a specific part to locate.. but the timing belt water pump and all that? must be it has a special name for it... idk i will look into a haynes repair manual or somthing of that sort and see what i can do with this manual...

[AudiTechS4]

toothed belt

[kwimberly]

I don't think there's a haynes for the B6

[diagnosticator]

I don't think there's a haynes for the B6

There is, Check the Haynes website.
It's a new title.

[diagnosticator]

i pretty much just wasted 75 bucs then

The Bentley for our Audis is crap, compared to the amazingly detailed manuals other manufacturers provide. And, it's not Bentley's fault, the blame is with AoA Service Publications. The thing is, there is a lot of service data missing. If you review the "Repair Manual", instead of any useful content under the title listings, very ofter it only refer to Consult the Guided Fault Finding or other service data only available via the VAS 5051/5052 OE scan tool programming. Associated with this, is the fact that there is practically NO troubleshooting or other guidance regarding any of the electrical system or electrical equipment in the Bentley. As is, the "Repair Manual" is not a good value. One aspect is that the Training/Self Study books must be used, along with TSBs and other stuff included with the Repair Manual, so that the information can be tied together.
For the timing belt, it's covered in the Cylinder head Group, and/or the Maintenance Group.
I strongly encourage you, and anyone else who purchased this product, to go to the Bentley website and use the Feedback to complain. Unless we give feedback it's not likely to improve.

http://www.bentleypublishers.com/

From the above link, sign in, then click on "Member Center>Communications>Compose" to send feedback.

[kwimberly]

There is, Check the Haynes website.
It's a new title.

Weird. This is the latest one I could find on the website:

[G Men 08]

thanks for the input guys!! now at least i know its not just me

[diagnosticator]

Weird. This is the latest one I could find on the website:

I found it, it's on the Haynes UK website. However it doesn't cover quattro or 3.0, It has everything else in common though .




See link:

http://www.haynes.co.uk/webapp/wcs/s...2353&langId=-1

[G Men 08]

The Bentley for our Audis is crap, compared to the amazingly detailed manuals other manufacturers provide. And, it's not Bentley's fault, the blame is with AoA Service Publications. The thing is, there is a lot of service data missing. If you review the "Repair Manual", instead of any useful content under the title listings, very ofter it only refer to Consult the Guided Fault Finding or other service data only available via the VAS 5051/5052 OE scan tool programming. Associated with this, is the fact that there is practically NO troubleshooting or other guidance regarding any of the electrical system or electrical equipment in the Bentley. As is, the "Repair Manual" is not a good value. One aspect is that the Training/Self Study books must be used, along with TSBs and other stuff included with the Repair Manual, so that the information can be tied together.
For the timing belt, it's covered in the Cylinder head Group, and/or the Maintenance Group.
I strongly encourage you, and anyone else who purchased this product, to go to the Bentley website and use the Feedback to complain. Unless we give feedback it's not likely to improve.

http://www.bentleypublishers.com/

From the above link, sign in, then click on "Member Center>Communications>Compose" to send feedback.

feedback sent!!

[Pr0n]

sell it to me for cheap!

[G Men 08]

lol ill give it to you for what i paid for it hows that sound