Swaybar endlinks?

[Clay @ Kinetic]

Where can a guy find front and rear swaybar endlinks?

I'm looking to get some metal ones, looked all over, no luck.

[Clay @ Kinetic]

It looks like Mike @ Pure has them, disregard this post.

thanks

[andream88]

Audi RS2 Rear swaybar endlinks are made of metal ;)

[RuS4ty]

ecs also has them

[S4evr]

any advantages to switching to rear metal end links?

[BITRBO]

Is this a requirement if upgrading to any sort of swaybar kit? Or just good practice...?

[BastardS4]

good idea i guess if you are running monster sways. but ive not had any failures after over a year. just a standard no-speed bar.

[BITRBO]

yeah, nothing crazy. it'd just be a regular h-sport kit like one of these:

http://www.racerwheel.com/hot-22801.html

http://www.performance-cafe.com/prod...1b41ecf89251fb

edit: yes, I know they're the same

[BastardS4]

yeah, nothing crazy. it'd just be a regular h-sport kit like one of these:

http://www.racerwheel.com/hot-22801.html

http://www.performance-cafe.com/prod...1b41ecf89251fb

edit: yes, I know they're the same

im not sure a 22mm bar is big enough for the rear. The front is already significantly large.

[BITRBO]

yeah, the front is def. large enough but a 22mm might be fine for street apps. Now if you track your S and like more oversteer and turn-in, you might me right...

[Clay @ Kinetic]

Ordered mine from Mike @ Pure MS, great guy to deal with

Also ordered a shifter from Jay and a few other things.

Looking to get a rear diff mount from Frank @ ASP too.

[Venator1]

You can find them on these 2 websites below.

http://blauparts.com

http://www.foreigncarpartsonline.com/

[Mike@PureMS]

Thanks Clay! Went out yesterday.

[onemoremile]

im not sure a 22mm bar is big enough for the rear. The front is already significantly large.

The front is hollow which means it isn't as stiff as a 35mm solid would be.

These bars are the best engineered and most balanced set available for our cars. Once you switch to coilovers or stiffer springs over about 500 lbs/in then the front gets to be too much and you're better off with a stock front bar and the H-sport rear. If you can't get the rear alone the Neuspeed rear isn't all bad. I've had them for about 4 years and ran them with stock sport, KW V1 coilovers, and now Shine Racing suspension with 400 pound springs. The S4 Avant runs them with Vogtland Club Spec springs over Konis but will soon swap the springs out for 500 lb Shine springs.

[onemoremile]

Just an FYI, the best front bar links available are the rear links for an Impreza from Agency Power. They might seem like overkill for a street car but they should last a lot longer than the stock ones. If you track the car you'll appreciate the response that comes from the lack of compliant rubber.

[Clay @ Kinetic]

Just an FYI, the best front bar links available are the rear links for an Impreza from Agency Power. They might seem like overkill for a street car but they should last a lot longer than the stock ones. If you track the car you'll appreciate the response that comes from the lack of compliant rubber.

I got a set from Mike @ Pure MS, we'll see how they work

I don't track the car, just tear up the streets