Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Veteran Member Three Rings
    Join Date
    Dec 14 2006
    AZ Member #
    14197
    Location
    Halifax, NS, Canada

    Some One with ETKA

    Guest-only advertisement. Register or Log In now!
    I redid my control arms a while ago. But the car has been sitting. noticed that on one side the bolts for the shock were not visible though the holes... though the 3 bolts to hold whole assembly was there and they are visible on passenger side.. I remember that I swapped left and right are these two different part numbers in ETKA? Its the top where the upper control arms bolt to.
    Thanks
    2001.5 1.8T Manual Quattro Celebration | Startup Racing Vogtland Coilovers | Giac X Chip | SPP A pillar with VDO Gauge | Boxster/A8 Front brakes S4 rears | Neuspeed Catback VMR Testpipe |

    NOW DEAD :(

  2. #2
    Veteran Member Three Rings
    Join Date
    Jun 20 2007
    AZ Member #
    18944
    My Garage
    2012 JSW TDI
    Location
    Raleigh, NC

    Re: Some One with ETKA

    http://ncdubs.org/forum/album.php?al...&pictureid=384

    what do you need the part number for?

  3. #3
    Veteran Member Three Rings
    Join Date
    Dec 14 2006
    AZ Member #
    14197
    Location
    Halifax, NS, Canada

    Re: Some One with ETKA

    they are the same doesn't matter, found problem.
    2001.5 1.8T Manual Quattro Celebration | Startup Racing Vogtland Coilovers | Giac X Chip | SPP A pillar with VDO Gauge | Boxster/A8 Front brakes S4 rears | Neuspeed Catback VMR Testpipe |

    NOW DEAD :(

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.