VMR V710's on a B6 S4

[khyber]

Here are the sideshots everybody wanted. Direct side shots and rolling kind of hint at BBS RGR to me. What do you all think?








Rolling (not the greatest rolling shots ever):



Just picked up a set of these and love them. Just thought I'd snap a few shots and throw them up for anybody who might be considering them.






I believe they are ET35 and I have 10mm spacers in the back. I'm waiting on some center caps and then having them powder coated to match the badges/grill, or getting them done in a lighter shade of grey and repainting the badges/grills to match. Let me know what you think, and if anyone is thinking about these wheels I've got a bunch more pictures of the wheels specifically, and their fitments. Thanks
-Max

[MOFSTEEL]

A full side shot would help.

[iconoclast]

2nd... profile shot is key here.

[xtort44]

I like what I've seen so far. Hey Mofsteel. Can you find me a pic of a Dolphin Grey b6 s4 with these wheels in anthracite? ;) Did you happen to weigh these before mounting em?

[PenguiN]

i think these are a cheaper version to the HRE Monoblocks. They dont look bad but i need o see a side shot.

[Speedymon]

Yes need a sideshot

[ZEUSROTTY]

sideboob

[SuperAvant]

i really like these wheels but is it just me or do you have a stretch look going on? I think since these wheels are so concave that stretch wouldnt look as good as a properly fit tire.

[enigma1406]

Really like the look.

i think these are a cheaper version to the HRE Monoblocks. They dont look bad but i need o see a side shot.

Cheaper doesn't begin to describe it. A set is less than one monoblock.

[RAudi Driver]

Max, are those new PS2's? Nice! i agree that you need take a few steps back and snap some more pics. A far shot would even be nice.

I see that you put a 10mm spacer on the rear, which would bring your offset to a +25. I don't see how you're gonna keep from rubbing with that offset. I would probably have done a 245 all the way around with no rear spacers. That would make your wheel look a little more concave (good) and would fill the wheelwell better than a 235.

Anyway's, the way your drive, you'll burn through those 235's in no time. If you got the tires from tire rack you have a 30 day return period where you could switch them out for 245's.

Whatever the case is, your car looks great with the new wheels and wash.

[J3RR3L]

M

Anyway's, the way your drive, you'll burn through those 235's in no time. If you got the tires from tire rack you have a 30 day return period where you could switch them out for 245's.

Whatever the case is, your car looks great with the new wheels and wash.

I agree, 245 would look good with those spokes. overall, very sharp looking rims

[UltraS4John]

SIDE SHOT....who cares about the front and back or angle...SIDES!!!! :)

[XwalkerX]

how wide are these wheels?

[doublezero30]

cant wait until they make these in 18in gunmetal!!

[enigma1406]

Also, FYI, 235s don't support enough weight for the S4 front end. Even the XLs don't. That's why tirerack doesn't suggest 235s for the S4 (only the A4).

[ngng]

Also, FYI, 235s don't support enough weight for the S4 front end. Even the XLs don't. That's why tirerack doesn't suggest 235s for the S4 (only the A4).

aren't the stock tires 235s?

[enigma1406]

aren't the stock tires 235s?

235/40/18 has a different load rating than 235/35/19. Sorry, I meant exclusively for 19s with a 35 sidewall.

[khyber]

That's the only real side shot I took for some reason. I thought I had taken more but I guess not. I'm planning on taking more today, I was going to go up to Glendora Mt. Rd and do a photoshoot or something, so I'll take a bunch today and update the pics here with some better shots.

As far as the PS2's, in the back I've got PS2s, and up front i have PZero Neros. I got a really good deal on these because they were used but in real good condition so I just took them as opposed to spending a boatload on new 19" tires. And I just wanted to throw these on ASAP. And as far as the 25mm offset goes, I am rubbing a little bit (not as much as I thought though), but if my financial situation allows for it I've got some big ideas for the car and the offset will be much much lower than that (but again, that's only if money allows for it. I'll definitely be posting updates though).

And thank you for all the compliments, sorry the pics aren't better, I'll see what I can do today. Hopefully I can bring one of my photographer buddies along.

[UltraS4John]

Can you take about 2 steps back and get down...then take a pic? LOL... :)

Thanks.

[channad]

x2!

[EuroB6]

cheap or not cheap..they looks just like the the HRE wheels and they look sweet!! I definitely would buy these for my b7 s4, if i was looking.

[khyber]

I like what I've seen so far. Hey Mofsteel. Can you find me a pic of a Dolphin Grey b6 s4 with these wheels in anthracite? ;) Did you happen to weigh these before mounting em?

Charles from VMR said he weighed them right when they got in and it was 26 or 27, can't remember which he said. I think it was 26 though... heh. If anything, they do feel a little bit heavier than the A4 S-line five spokes I had on prior to this. Not by a ridiculous amount though.

And sideshots are being uploaded to photobucket right now...

[UltraS4John]

Thanks khyber. You're the first to post pix of VMR 710's....nice job!

[RAudi Driver]

Man those wheels look great. VMR did a good job at knocking off HRE's monobloc. These wheels are almost exactly like VMR's CSL BMW knockoff wheels.

[dreamcar=rs4]

I really like these wheels...are center caps available?

[xtort44]

If I decide to go the "cheaper" wheel route I'm probably going to seriously consider these now. Can't wait to see em in person. Photos don't do the b6 s4 justice.

[channad]

i guess no monoblock HREs for anyone then...

these do look great...

[jayel]

that looks really nice!!

what is the weight?

Are VMR's known to be strong?

[rs_fizzy]

Nice!!! See ya on thursday!!

[VMRWheels]

that looks really nice!!

what is the weight?

Are VMR's known to be strong?

The wheels definitely look great on your car Max! They are 26lbs. As far as strength, they are very durable! Our wheels are JWL, VIA certified for strength and safety. We have also tracked tested a few wheels in our lineup. They stand up to the beating

-Charles@VMRWheels
www.vmrwheels.com

[RAudi Driver]

What about all those wheel weights?

[UltraS4John]

khyber: thanks for updating the pics... we ALL appreciate them. :)

[nimski62]

Pic with centercaps bc it bugged the hell out of me =)

[colonelburke]

That looks good with the center caps.

[channad]

What about all those wheel weights?

26 lbs...1 lb lighter than stock 18s?

[VMRWheels]

26 lbs...1 lb lighter than stock 18s?

Weight was posted in previous posts. 26lbs.

-Charles@VMRWheels
www.vmrwheels.com

[PenguiN]

they look nice... I would totally get these if they came in a matte charcoal color.

[SuperAvant]

they look nice... I would totally get these if they came in a matte charcoal color.

They would look like those Breyton Race GTS'

[VMRWheels]

they look nice... I would totally get these if they came in a matte charcoal color.

We can do custom powder coated finishes. $120 a wheel. Satin Gunmetal would be a great looking finish.

-Charles@VMRWheels
www.vmrwheels.com

[RAudi Driver]

26 lbs...1 lb lighter than stock 18s?

I'm talkin' about these wheel weights.