Tenzo Type M (V2) Day Shots Edited

[7speed]

Okay guys here are the daytime (well lit photos). Photos were taken after HIN here in Orlando. Everyone loved the new rims and were puzzled as to why I didn't like them. Here are the pics.

[A4natomical]

the thing with black wheels is, its hard to make out the design.

i can see about 2 of the 12 spokes on each wheel....

but your car looks stock none the less... ;)

[t1demont1]

I think i liked your old rims more man, but ill have to see these in person before im 100% sure.

[1BadA4]

i like them, was your car in HIN?

[7speed]

i like them, was your car in HIN?

Yah I was there with there.

I think i liked your old rims more man, but ill have to see these in person before im 100% sure.

I stopped by Hunter's Creek for a minute after the show tonight, there were only 3 guys there. The guy who had the RS4 was there with his 1985 M3 (with only 35K original miles).

[auggy]

I stopped by Hunter's Creek for a minute after the show tonight, there were only 3 guys there. The guy who had the RS4 was there with his 1985 M3 (with only 35K original miles).

Didn't the m3 start production in 1986?




Nice car btw

[G Men 08]

the two tone scheme is pretty sweet imo, i wouldnt mind a carbon fibre hood like that but i dont have that kind of money so i will probably just paint my whole center black. the rims you have in these pics are nice btw, would be a little better if they had kind of a silver lining within the spokes so you can see them a little better and make out the lines, but these are just pictures on a screen, im sure it looks bad a$$ in person, Nice ride man, you have my vote

[mxrz]

Daytime? Kinda meaningless when you're not outside... Still can't see much.

[HeHateMe]

I like the wheels. I would like them even more if they didn't have that lip. The two-tone thing works very well.

[AudiA4Turbo22]

Old ones FTW!

[J3RR3L]

From what i can make out of it, i like it a lot. Are the door blades CF?

[AudiA4Turbo22]

did u get a new front?? that is the Kerscher no??

[7speed]

did u get a new front?? that is the Kerscher no??

Nope, same Kerscher front

[AudiA4Turbo22]

^^u need a kerscher rear lol, that would really look good if u got the CF diffuser with it!

[golgo13]

Your car looks good without the eyelids. I like these wheels a lot more than your old.

[HeHateMe]

Dude, those wheels are sick. Just saw the new pics. Keep them on. They are sweet. What don't you like about them? They kind of remind me a little of the black CHs.

[7speed]

Daytime? Kinda meaningless when you're not outside... Still can't see much.

Okay check em' out out now

[HeHateMe]

I see a Kerscher front and ABT sides, what rear do you have?

[J3RR3L]

damn sam, i am really digging the look. have you thought about painting the centers black. also, do these come in 19x10?

[vinny.dtw]

I think they look pretty good. Just weary of tenzo's...

[manhertm]

I think your wheel choice was fine, where you messed up was the accents on the wheel. Your car is already fully accented, the wheels were overkill. If it was the opposite and your car was more of a solid color, those wheels would have worked.


Kinda like this

By manhertm, shot with Canon PowerShot A70 at 2008-03-08
I also would have went with the wider 10 inch rear with some camber, you have chunky kit like Kirk said, so the wheels need to have an aggressive stance.

Even though I like the Tenzo wheel design better, I think the Sevas worked better because it wasn't too busy. Like a said the overall car has enough accents so the wheels should not draw away from that. Just my .02

[7speed]

I see a Kerscher front and ABT sides, what rear do you have?

It's a Reiger rear

I think they look pretty good. Just weary of tenzo's...

All I know is that they are wayyy lighter than my Sevas, my car accels like crazy !

I think your wheel choice was fine, where you messed up was the accents on the wheel. Your car is already fully accented, the wheels were overkill. If it was the opposite and your car was more of a solid color, those wheels would have worked.


Kinda like this

By manhertm, shot with Canon PowerShot A70 at 2008-03-08
I also would have went with the wider 10 inch rear with some camber, you have chunky kit like Kirk said, so the wheels need to have an aggressive stance.

Even though I like the Tenzo wheel design better, I think the Sevas worked better because it wasn't too busy. Like a said the overall car has enough accents so the wheels should not draw away from that. Just my .02

I think that I may like them better if they were all Black, I wanted a 10" rear but they said that they would not fit.

[XwalkerX]

didn't The M3 Start Production In 1986?




Nice Car Btw

1988

[auggy]

1988

Is when they were first imported to america, right?

[HeHateMe]

Those wheels come in our bolt pattern?

[manhertm]

It's a Reiger rear



All I know is that they are wayyy lighter than my Sevas, my car accels like crazy !



I think that I may like them better if they were all Black, I wanted a 10" rear but they said that they would not fit.

I think a 10" would fit, what was the offset for the 10" inchers.

I'm thinking a 45ET would be fine. Remember A4Dit has 9.5 on the rear with a 35ET. One half inch wider tire with 45ET would be fine. Here's a few pics of his car.

By manhertm, shot with NIKON D40 at 2008-07-20

By manhertm, shot with NIKON D40 at 2008-07-20

[20A4Audi1.8t01]

looks pretty good Sam I think black housing ecodes would set the black/silver off more!!

[AudiA4_20T]

if you got rid of the doorblades it would be money IMO

[trueno429]

i like em..paint your calipers silver

[pyro]

i like the new ones better, and x2 on the ecodes. that would complete the look.

[HeymyAudi]

uhmmmmmmm I like the wheels.... Some nice BIG SILVER brakes would look Great behind them

[A4natomical]

i like them a lot.
you cant go wrong with either set tho.

[PRY4SNO]

Not a fan.

IMO, rice = .

Tenzos are cheap quality Jap-crap, not worthy of a fine German saloon. Might as well toss a Tenzo spoiler to finish the look.

But it's your ride and at the end of the day you've got to be happy so don't let me rain on your parade. Just thought I'd be honest, even if it means I'm not licking your ass.

[7speed]

just gotta find a buyer for these now

[1BadA4]

ur part of team solo?? i didnt even notice that, so u know ryan dee?? he lives like right down the street from me, had the g35TT, and is driving the f430 now.

[7speed]

Not a fan.

IMO, rice = .

Tenzos are cheap quality Jap-crap, not worthy of a fine German saloon. Might as well toss a Tenzo spoiler to finish the look.

But it's your ride and at the end of the day you've got to be happy so don't let me rain on your parade. Just thought I'd be honest, even if it means I'm not licking your ass.

Yah I was a bit aprehensive about buying them initially because of the name. But I thought to myself who gives a $hit If I like. My only regret is not getting all black and the 10" rears.

[Rem-Rock]

Nice bro, I like it. You mind sharing where you got your door blades in carbon fiber? Did you get it done localy? I live in Altamonte Springs.

[7speed]

Nice bro, I like it. You mind sharing where you got your door blades in carbon fiber? Did you get it done localy? I live in Altamonte Springs.

Carboncopy.com

[Rem-Rock]

Do you mean carboncopydesigns.com? The people who sell interior trim set for an arm and a leg?

[Maverick]

the 4th picture is money!
black headlight housings are needed immediately!