Audizine - An Automotive Enthusiast Community

Results 1 to 4 of 4
  1. #1
    Registered Member Two Rings AuditudeA642's Avatar
    Join Date
    Jun 12 2007
    AZ Member #
    18742
    Location
    New York

    Installed Milltek Resonated Valved Exhaust on the RS4

    Guest-only advertisement. Register or Log In now!
    I bought this from a fellow member who had custom valves (through the factory sport mode) and i can bypass the mufflers with a push of a button or run full exhaust. I can't even explain how much the car picked up off a roll over 50mph. The car pulls so so much harder. I am thrilled!! I will post some vids tomorrow of no muffler and with muffler. The great thing is that even at 70mph with the valves open there is no drone whatsoever.
    Stable:
    07' RS4 Phantom Black/Ebony Premium CF Trim and Sirius. Front Filler Plate, Tints, K&N Filter, Black Reflectors, Deflapped and Milltek unresonated Catback with Muffler Bypass Valves.
    09' BMW X5 3.0 Sport Black/Almond

    Gone but not Fogotten:
    01' A6 4.2 Silver/Ebony (Highly Modded)

  2. #2
    Veteran Member Four Rings WinterRunner's Avatar
    Join Date
    Oct 11 2007
    AZ Member #
    21717
    My Garage
    12' DG R8 5.2 6mt 22' CG Q3 S+ 07' DG RS4 01' A4 avant 5mt
    Location
    Suburbia

    Re: Installed Milltek Resonated Valved Exhaust on the RS4

    A bypass valve like the one's on our stock S4 exhausts? I'd be curious to see a pic. Thanks.

  3. #3
    Senior Member Three Rings lrae's Avatar
    Join Date
    Jul 22 2007
    AZ Member #
    19732
    My Garage
    b7%20s4%2C%20b8.5%20sq5%2C%20488gtb
    Location
    Southern NH

    Re: Installed Milltek Resonated Valved Exhaust on the RS4

    Smashrs4's exhaust right? i wish i could have heard it. Will you be at waterfest with it this weekend? i would like to hear it.
    2007 S4 Phantom Black Pearl / Ebony Nappa | RNS-E | CF | Corsa Catback | 034 Suspension Goodies| Bilstein B14 | RS4 Grille | VMR V706 19x8.5
    2016 SQ5 Daytona Gray Pearl / Ebony Fine Nappa | Carbon Atlas | Black Optics | APR Stage II w/XLR8 196.5mm Single Pulley | Roc-Euro | H&R Sport Springs
    2018 Ferrari 488 GTB | Rosso Scuderia

  4. #4
    Registered Member Two Rings AuditudeA642's Avatar
    Join Date
    Jun 12 2007
    AZ Member #
    18742
    Location
    New York

    Re: Installed Milltek Resonated Valved Exhaust on the RS4

    Yea Smash's Exhaust. I will be at Waterfest Saturday, you going to be there? Im supposed to be in the Audiworld Tent.
    Stable:
    07' RS4 Phantom Black/Ebony Premium CF Trim and Sirius. Front Filler Plate, Tints, K&N Filter, Black Reflectors, Deflapped and Milltek unresonated Catback with Muffler Bypass Valves.
    09' BMW X5 3.0 Sport Black/Almond

    Gone but not Fogotten:
    01' A6 4.2 Silver/Ebony (Highly Modded)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.