Need help before waterfest :)

[Antekaudi]

Hey.

So i am getting my tints tomorrow :)

35% i think its enough.

And i wanna do clear corner mod but my headlight is different then on on a4mods.

Also what paint should i use to paint the bulbs silver ?

And will wheel caps from audi a6 rims i think 16" or 15" fit my 18" rpm 505 ?



PICTURES:

the rims is just like this one:
http://cgi.ebay.com/ebaymotors/Parts...3756.m14.l1318


And my headlights i cant find picture but my car is 2005 usp.



My car btw:

http://img242.imageshack.us/my.php?image=heykf0os2.jpg

As you can see i need tints + clear corner( corners are photoshoped on this pic)


Thanks for help guys

[akaEsCo01]

Did someone smoke your corners? Those look like stock headlights with something done to the amber inside

[got boost.]

Did someone smoke your corners? Those look like stock headlights with something done to the amber inside

OP says photoshop.

[AudiA4Turbo22]

really doesn't matter the clear cornering process is the same! just adjust ur high beams as far up as possible adn watch the amber piece slide out from under!

[natalia]

Hey.

So i am getting my tints tomorrow :)

35% i think its enough.

And i wanna do clear corner mod but my headlight is different then on on a4mods.

Also what paint should i use to paint the bulbs silver ?

And will wheel caps from audi a6 rims i think 16" or 15" fit my 18" rpm 505 ?



PICTURES:

the rims is just like this one:
http://cgi.ebay.com/ebaymotors/Parts...3756.m14.l1318


And my headlights i cant find picture but my car is 2005 usp.



My car btw:

http://img242.imageshack.us/my.php?image=heykf0os2.jpg

As you can see i need tints + clear corner( corners are photoshoped on this pic)


Thanks for help guys

My car is the same color I had 5% percent done and it looks great. I would consider more tint then 35%

[A4 KiDD 810]

I would do 30% at least.

[B6Lovin]

i'd do 30 on the sides and 20 in the rear windshield.

and for the love of god - you're getting your WINDOWS TINTED... TINT is ALWAYS SINGULAR!!!

you are NOT getting "TINTS"


sorry, but i see that SOOOO MUCH here and it just pisses me off

[Antekaudi]

Hey sorry not my fault.. i am in the country for about 2-3 years :(

What kind of spray paint should i use to paint light bulbs ?

I am getting 35% my interior is black and its legal. I dont wanna get pulled over.

BTW what should i get for my license plate ( european license plate)

http://www.europlates.com/cust-ecc-italy.php

I am Polish btw
Thanks

[A4natomical]

for the bulbs, silver engine enamel.
i have bi xenons like your headlights. so i took out the xenon lens out and slid the amber through that hole.
instead of going under.

[audikid66]

don't paint the bulbs.. jus get new side marker bulbs..looks much better IMO... we did my corners we actually heated up my headlight with heat gun and pulled the whole lense off and took the ambers out.... then resealed with RTV black silicone sealant.. i didnt wan to hafta worry bou mny headlights eventually crackin from dremeling the bottom cause it happened to my friends.. this way takes longer but in the long run i think is much better

[pondside36]

Wow... so did you paint the interior while you were at it? Seems like a lot of work for something that took less than 30 minutes..