Neuspeed exhaust install

[FourRings80]

Well this morning UPS dropped off my Neuspeed exhaust . Went to my local shop, got 1 triangular gasket and 3 diamond gaskets for $21. With the DIY on A4mods.com in hand I tackled the install in the drive way with ramps. If I knew how frustrating this install could get, I would of probably paid to get It done in a shop... But It's over took me 4 hours, with a sore neck and beat up hands I'm extremly happy with the results! The only problem I have, Is that the driver side muffler was about 1 " lower . The only way I got It to go up a little was to bend the support hangers on the exhaust a bit. Anyways I love the sound of my car, soo much better than my old oem exhaust.

Thanks Condo

Here's a few pics:






When the UPS guy got my box from the truck, My downpipe was sticking out of the side , but nothing was damaged. My dog loves this box for some reason?

[Condo]

Glad you like it and it made it to a good home. Looks like UPS was a little rough with the box though. Any sound clips?

[FourRings80]

Sorry no sound clip yet, but I will take a few tomorrow. Just took a couple of pics and had to go to the restaurant with the girlfriend lol.

[oregonaudi]

It sounds sweet, huh?
I love mine, but a no go with a test pipe

[gdawg'05a4]

Very nice. I'd keep an eye on that exhaust hanger you had to bend in order to get that side up. The shop that I took it to did this (the mufflers were lower than I liked) to even out my mufflers but a week or two later, it sagged back down. You may need to bring it to a shop and have a new, shorter hanger welded on that side.

[AudiA4_20T]

with a testpipe it sounds nasty

[Papachristou]

with a testpipe it sounds nasty

it does indeed!

[FourRings80]

Very nice. I'd keep an eye on that exhaust hanger you had to bend in order to get that side up. The shop that I took it to did this (the mufflers were lower than I liked) to even out my mufflers but a week or two later, it sagged back down. You may need to bring it to a shop and have a new, shorter hanger welded on that side.

yeah I'll bring it to work on my day off and cut the hangers. Easy fix I'll cut about 5/8" off and tig weld it back on.

[ZGSON]

I ordered a Magnaflow set up from hottexhaust and it didn't come with any gaskets or anything, assuming I need to get those?