Exhaust Pics from UNDER the car, ANYBODY have some?

**A4 TSCHUSS** · 07-09-2008 08:16 PM

Hey I am looking for some pics of the exhaust (dont care if it is custom or any other brand) from under the car, like when it was on a lift or something. If anyone has some post them up.

Thanks

**B6Lovin** · 07-09-2008 08:23 PM

i don't have any yet.... mind if i ask why you need them?

**michgo** · 07-09-2008 08:29 PM

Here is one from my car. I have completely different piping as opposed to stock though. Hope it helps.

**aaaudiprotein** · 07-09-2008 08:29 PM

**A4 TSCHUSS** · 07-09-2008 08:33 PM

Originally Posted by B6Lovin

i don't have any yet.... mind if i ask why you need them?

just didnt feel like driving my car up on blocks and climbing under it to get a quick idea of what im gonna need.

I have neuspeed exhaust which is 60mm (2.3") so im gonna have a 3" section made from the 3" downpipe back to the Y. I wanted to get an idea of what kind of bends or what im gonna need to make what I want. I don't have crap for shops here except for a little muffler shop which does have 3" but it wont be mandrel. I was thinking of maybe buying some sections of straight and pre bent 45 or 90s that are mandrel and having my buddies dad weld it together. He has a bender but it only goes to 2" so he cant bend me any pipe.

I am gonna have him put a vband on my downpipe and then have one on the "straight" section of exhaust going back to the Y. The muffler shop only has a mig welder and I doubt that it would be a descent job so im trying to figure out how im gonna do all this.

**italian a4 1032** · 07-09-2008 08:34 PM

click

**aaaudiprotein** · 07-09-2008 08:38 PM

Oh, i got a question from u guys.
I got 2.5" to the y-pipe and then 2.25" to the mufflers with no resonators and a stock dp.
im thinking about getting a custom 2.5" dp. How louder (if) what that be?

**A4 TSCHUSS** · 07-09-2008 08:39 PM

Thanks guys. I am really just needing to see the front section. Looks like there is a little S in there. Wonder if 2 45s would work to make that zig zag.