FS : BRAND NEW 2.0 Stroker Cranks - 375US

[Wizard-of-OD]

Thats right folks,
I bought a bunch of BRAND NEW (not second hand...not crusty...not old) 2.0 92.8mm stroker cranks for the 06A block and I am looking to unload them.
The crankshafts are cast (before you moan the cast crank from vw has been taken to over 500whp).

Asking price - $375US shipped.Great way to kick off your 06A stroker project.

I only have 5 so first come first serve.

[AudiA4_20T]

Thats right folks,
I bought a bunch of BRAND NEW (not second hand...not crusty...not old) 2.0 92.8mm stroker cranks for the 06A block and I am looking to unload them.
The crankshafts are cast (before you moan the cast crank from vw has been taken to over 500whp).

Asking price - $375US shipped.Great way to kick off your 06A stroker project.

I only have 5 so first come first serve.

Issam throw a post in the B6 forum too, since most 06A guys are B6

[t1demont1]

sounds interesing, holding out on the aeb guys?

[Wizard-of-OD]

AEB guys need the ABA cranks....you can pick those up for peanuts :D

Come on...I allready told you that next round is 2.2 for you...NO 2.0!!!

[t1demont1]

2.2 how the hell would I do that?

[Wizard-of-OD]

in time son...in time

[t1demont1]

show me a 2.2 build and ill show you a customer :D

[AudiA4_20T]

show me a 2.2 build and ill show you a customer :D

Issam has one lol

[t1demont1]

oh damn lol

[onemoremile]

It is closer to 2.1 but still about as large as you can go with these little 4 pots.

[mike-2ptzero]

It is closer to 2.1 but still about as large as you can go with these little 4 pots.

Correct, just a high 2.1 liter like mine is a high 2.0

83 bore and 98 stroke = 2121cc
83.5 bore and 98mm stroke = 2147cc

To get the 2.2 liter you need to run a Eurospec 100mm crank
83 bore and 100mm stroke = 2164cc
83.5 bore and 100mm stroke = 2190cc


Both need to be done in a tall deck block (TDI 1.9 or 2 liter)


83.5

[Wizard-of-OD]

No 98mm stroke Mike.

[Militant-Grunt]

Once I get my S4 shell, I'll be contacting you (Again) Issam.
Worst case scenario, if you run out, will you be getting more?

[Wizard-of-OD]

Nah,I only have 5 on board :(

[legionvr6]

sorry to go a bit off track. but for AEB's the ABA crank works for a 2.0 stroker? the VW ABA 2.0? AKA the 2.slow? i just wana make sure im not a moron.

[AudiA4_20T]

sorry to go a bit off track. but for AEB's the ABA crank works for a 2.0 stroker? the VW ABA 2.0? AKA the 2.slow? i just wana make sure im not a moron.

looks like you read the FAQ lol, that is correct

[legionvr6]

never realy had a chance to go through the engine build part. just took a look and WOW thats cool lol

[mike-2ptzero]

No 98mm stroke Mike.

Just giving an example seeing that you stated on your build that you did not go with the 100mm crank. I wasn't going to waste my time trying to dig up your build thread so I just threw out a number lower then 100.

[Wizard-of-OD]

LOL
ok ....who wants cranks?

[GURUMAN]

me

[bassed]

Just giving an example seeing that you stated on your build that you did not go with the 100mm crank. I wasn't going to waste my time trying to dig up your build thread so I just threw out a number lower then 100.

Pull it up I have not seen it in so long

[1hotA4]

It is closer to 2.1 but still about as large as you can go with these little 4 pots.

There was some guy trying to sell a 2.35L on ebay for 15000$ last week i believe. Or so he said it was a 2.35L.

[mike-2ptzero]

There was some guy trying to sell a 2.35L on ebay for 15000$ last week i believe. Or so he said it was a 2.35L.

Most likely a inline 5.

[1hotA4]

Most likely a inline 5.

Oh i wrote down his spreedsheet about it....
And yeah i just realized it said 5 cylinder. =)

this is what it said though...

DESCRIPTION
You are looking AT AUDI STATE OF ART ENGINE MONSTER!!!!
This is a LENGENDARY 5 cylinder 20V TURBO engine fully built to hold 900+++ HP With NO QUESTIONS AT ALL!!!
ENGINE Specs
7A BLOCK BORED TO 2.35L WITH 83MM WISECO PISTONS WITH 8,5:1 CR;
BRAND NEW PAUTER FORGED RODS
BRAND NEW OEM AUDI RS2 ROD BEARINGS
BARND NEW ARP CUSTOM MAIN BOLTS
FORGED CRANCK FULLY BALANCED
BRAND NEW OEM RS2 OIL PUMP
7A CYLINDER HEAD FULLY PORTED AND POLISHED
WATER MANIFOLD MACHINE WORK DONE BY LR ENG.
BRAND NEW STAINLESS STELL VALVES
BRAND NEW VALVE GUIDES
BRAND NEW TITANIUM VALVE SPRINGS RETAINERS
BRAND NEW HIGH RATE / HEAVY DUTTY SPRINGS / LIFTERS
7A CAMS (RS2 CAMS AVAILBLE UPON REQUEST)
BRAND NEW 034 MULTI-LAYER CUSTOM BUILT HEAD GASKET
ARP RACE HEAD BOLTS.
ALSO THIS COMPLETE ENGINE HAS BEEN ASSEMBLED/BLUE PRINTED AND BULLET PROOF CERTIFICATE FOR 900+++hp BY LG ENGINEERING , IN HOLLYWOOD, FL SPECIALIZED IN AUDI AND VW ENGINE BUILT AND HEAD WORK FOR OVER 20 YEARS
ACESSORIES
BRAND NEW CUSTOM BUILT EXHAUST MANIFOLD FROM LOVEFAB WITH LIFETIME WARRANTY AGAINST CRACK WITH T3 TURBO FLANGE AND 40MM WASTEGATE FLANGE.
BRAND NEW TIAL 40MM WASTEGATE WITH 1.2 BAR SPRING
BRAND NEW CUSTOM BUILT TURBO BY BORG WARNER K27/28 TO MAKE 800+++ HP.
BRAND NEW 034 RACE FUEL RAIL
BRAND NEW DELPHI 75LBS (790CC) INJECTORS (5)
COMPLETE AUDI RS2 ENGINE HARDNESS
AUDI RS2 FRONT AXLES
AUDI 4000 TRANSMISSION 5 SPEED WITH 45K MILES ON IT (6 SPEED TRANNY AVAILABLE UPPON REQUEST)
BRAND NEW FIDANZA ALUMINIUM FLYWHEEL
BRAND NEW STAGE 5 SPEC CLUTCH SET
AUDI 4000 DRIVESHAFT WITH 45k MILES ON IT.
034 RACE ALUMINIUM RADIATOR
BRAND NEW ALUMINIUM RACE FRONT MOUNT INTERCOOLER (32x12x4)
AAN CYLINDER HEAD COVER. (NOT IN THE PICTURE)
THIS IS A PROJECT THAT I WAS WORKING FOR THE LAST 3 YEARS AND NOW I HAD TO LET IT GO BECAUSE OF FAMILY ISSUES.
MY LOSS IS YOUR GAIN!!!!!
I HAVE CLOSE TO 20k JUST IN PARTS AND LABOR ON THIS PROJECT AND I AM ASKING VERY REASONBLE PRICE FOR THIS WHOLE THING
PLEASE CALL ME IF YOU HAVE ANY QUESTIONS, 954-822-3654
MORE PICTURES WILL BE POSTED SOON!!!
BUY IT NOW AND YOU WILL GET 1990 AUDI CQ BLACK WITH IT!!!!!!!!

[Siena]

That's one hell of an Audi Powerhouse.

Gotta love the Big Five motors.

[Wizard-of-OD]

Siena you got my last PM?
And forget the old bug 5's

little secret : new rabbit 2.5 motor accepts the A4 passenger side engine mount bracket (needs some tweaking though).

[Nebone]

Better start making flywheels and transmission adapters before this secret gets out too fast.

[killa]

Oh i wrote down his spreedsheet about it....
And yeah i just realized it said 5 cylinder. =)

this is what it said though...

DESCRIPTION
You are looking AT AUDI STATE OF ART ENGINE MONSTER!!!!
This is a LENGENDARY 5 cylinder 20V TURBO engine fully built to hold 900+++ HP With NO QUESTIONS AT ALL!!!
ENGINE Specs
7A BLOCK BORED TO 2.35L WITH 83MM WISECO PISTONS WITH 8,5:1 CR;
BRAND NEW PAUTER FORGED RODS
BRAND NEW OEM AUDI RS2 ROD BEARINGS
BARND NEW ARP CUSTOM MAIN BOLTS
FORGED CRANCK FULLY BALANCED
BRAND NEW OEM RS2 OIL PUMP
7A CYLINDER HEAD FULLY PORTED AND POLISHED
WATER MANIFOLD MACHINE WORK DONE BY LR ENG.
BRAND NEW STAINLESS STELL VALVES
BRAND NEW VALVE GUIDES
BRAND NEW TITANIUM VALVE SPRINGS RETAINERS
BRAND NEW HIGH RATE / HEAVY DUTTY SPRINGS / LIFTERS
7A CAMS (RS2 CAMS AVAILBLE UPON REQUEST)
BRAND NEW 034 MULTI-LAYER CUSTOM BUILT HEAD GASKET
ARP RACE HEAD BOLTS.
ALSO THIS COMPLETE ENGINE HAS BEEN ASSEMBLED/BLUE PRINTED AND BULLET PROOF CERTIFICATE FOR 900+++hp BY LG ENGINEERING , IN HOLLYWOOD, FL SPECIALIZED IN AUDI AND VW ENGINE BUILT AND HEAD WORK FOR OVER 20 YEARS
ACESSORIES
BRAND NEW CUSTOM BUILT EXHAUST MANIFOLD FROM LOVEFAB WITH LIFETIME WARRANTY AGAINST CRACK WITH T3 TURBO FLANGE AND 40MM WASTEGATE FLANGE.
BRAND NEW TIAL 40MM WASTEGATE WITH 1.2 BAR SPRING
BRAND NEW CUSTOM BUILT TURBO BY BORG WARNER K27/28 TO MAKE 800+++ HP.
BRAND NEW 034 RACE FUEL RAIL
BRAND NEW DELPHI 75LBS (790CC) INJECTORS (5)
COMPLETE AUDI RS2 ENGINE HARDNESS
AUDI RS2 FRONT AXLES
AUDI 4000 TRANSMISSION 5 SPEED WITH 45K MILES ON IT (6 SPEED TRANNY AVAILABLE UPPON REQUEST)
BRAND NEW FIDANZA ALUMINIUM FLYWHEEL
BRAND NEW STAGE 5 SPEC CLUTCH SET
AUDI 4000 DRIVESHAFT WITH 45k MILES ON IT.
034 RACE ALUMINIUM RADIATOR
BRAND NEW ALUMINIUM RACE FRONT MOUNT INTERCOOLER (32x12x4)
AAN CYLINDER HEAD COVER. (NOT IN THE PICTURE)
THIS IS A PROJECT THAT I WAS WORKING FOR THE LAST 3 YEARS AND NOW I HAD TO LET IT GO BECAUSE OF FAMILY ISSUES.
MY LOSS IS YOUR GAIN!!!!!
I HAVE CLOSE TO 20k JUST IN PARTS AND LABOR ON THIS PROJECT AND I AM ASKING VERY REASONBLE PRICE FOR THIS WHOLE THING
PLEASE CALL ME IF YOU HAVE ANY QUESTIONS, 954-822-3654
MORE PICTURES WILL BE POSTED SOON!!!
BUY IT NOW AND YOU WILL GET 1990 AUDI CQ BLACK WITH IT!!!!!!!!

15K for that motor is a bit on the heavy side, my 4banger motor will handle that hp as long as it doesn't detonate and i wouldnt dare ask that much for it.

[Wizard-of-OD]

Better start making flywheels and transmission adapters before this secret gets out too fast.

Every carbon copy is never as good as the original.

[Wizard-of-OD]

3 more left...

[leon]

I have an AEB, what do i need to make it 2.0..?
And do you ship to The Netherlands..?

[salz2135]

I have an AEB, what do i need to make it 2.0..?
And do you ship to The Netherlands..?

research...use the search button and you'll find quite a bit of info

ABA crank
clearance your block
custom pistons

and a free bump for issam's shiny cranks

[Wizard-of-OD]

I have an AEB, what do i need to make it 2.0..?
And do you ship to The Netherlands..?

Hi,
Yes I ship to Netherlands but I only have used ABA cranks here.Not new units...
You will need:
* ABA crank
* modification to your AEB im shaft to clearance the connecting rod end cap bolt
* clearance to the oil squirter.

I was going to make a conversion kit for the AEB's but the interest is slim to none.I prefer to sell them as the orders are processed.

[leon]

I did the search, i`m not really good in (technical) english (i`m Dutch)
and there is too much info, maybe somebody can help me out with a link?

I bought a spare engine and a GT35R, now i want 2.0 (or bigger)..

[Wizard-of-OD]

I did the search, i`m not really good in (technical) english (i`m Dutch)
and there is too much info, maybe somebody can help me out with a link?

I bought a spare engine and a GT35R, now i want 2.0 (or bigger)..

Send me a PM or email me : iabed[at]inaengineering.com

I will help you out....No Dutch please

[leon]

Ok... I will email you tomorrow, i`m leaving the office now..
The clearance is no problem, one of my best friend can do that for me..

[mike-2ptzero]

Send me a PM or email me : iabed[at]inaengineering.com

I will help you out....No Dutch please

He could send it to me in Dutch but I would need my mom to translate it.

[leon]

OT:
@Mike: We already had contact.. I want to be the first 2.0 in The Netherlands... Last week there was an ABT 2.0 enigine on Ebay.de, they sold it for 1,5K (euro), i made a mistake with bidding..

[onemoremile]

Hi,
Yes I ship to Netherlands but I only have used ABA cranks here.Not new units...
You will need:
* ABA crank
* modification to your AEB im shaft to clearance the connecting rod end cap bolt
* clearance to the oil squirter.

I was going to make a conversion kit for the AEB's but the interest is slim to none.I prefer to sell them as the orders are processed.

Have you considered stocking one or two IM shafts that have been machined down for balance and clearance? One would probably do and you could just do a core charge for the old one. You've probably got enough access to spare parts that cores just aren't a big deal.

[317ssayzarc]

and there is too much info, maybe somebody can help me out with a link?

heres the link to my thread in the b5 FAQ forum:

http://www.audizine.com/forum/showthread.php?t=188078

post up there if you have any questions