Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Active Member One Ring
    Join Date
    May 24 2008
    AZ Member #
    29151
    Location
    phoenixville pa

    Can anyone help with CA's?

    Guest-only advertisement. Register or Log In now!
    i just ordered a kit to do my control arms on a 2000 s4, what tools exactly am i going to need? and also ive spent hours trying to find a DIY for the Control arms (all 8 up front) anyone have the DIY or know a link to one?

  2. #2
    Veteran Member Three Rings Davect06607's Avatar
    Join Date
    Apr 07 2007
    AZ Member #
    17069
    Location
    Bridgeport, Ct

    Re: Can anyone help with CA's?

    Start soaking the pinch bolt with some PB Blaster now!
    It'll probably be a headache.
    '05 S4 6mt- Jhm 93 tune, Jhm IM Spacers, H&R c/o's, 034 Density Motor & Trans mounts, Hotchkiss Sway Bars f&r, Apikol snub & R.Differential mounts, 034 snub bracket, Jhm LW rotors w/ Hawk HPS, K&N, Piggies, FI Catback w/ 8" resonators, S.S. brake lines, 034 Density strut mounts, 034 MAF Hose, 034 adj. endlinks, RNSE, JHM Solid ss.

  3. #3
    Registered User Four Rings Mike@PureMS's Avatar
    Join Date
    Jul 19 2007
    AZ Member #
    19663
    Location
    San Diego, CA

    Re: Can anyone help with CA's?

    Plain hand tools. 18mm, 16mm, are the most commons tools you'll need. A ball joint separator is suggested for the lower arms. A couple floor jacks and jack stands will come in handy as well.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.