rear calipers

[solowb5]

So I got some second hand calipers from an online junk yard. I assumed the pistons need to be tightened in by rotating them to the right. So that I can fit new pads in them. Well it seems neither will go down. Is there a different way to put the piston down? They look in perfect condition.

[mholme]

So I got some second hand calipers from an online junk yard. I assumed the pistons need to be tightened in by rotating them to the right. So that I can fit new pads in them. Well it seems neither will go down. Is there a different way to put the piston down? They look in perfect condition.

They have to be pushed in and turn at the same time, usually with the proper tool. It can be done without it..not easily..

[NoLeafClover]

^^^ he is right they will go in but u have to push it in and keep on turning it untillit starts going in. i took a socket and welded two pins on it to use it with a ratchet dont give up they will go in

[solowb5]

Thanks guys!

[Rated S]

Or you can rent the pistol retraction tool at autozone for free.

[washyourrhands]

use a crowbar

[readimag]

yeah I used a small c clamp to help me.

[audispeed]

vice grips - get the points on the end in the groves of the piston and twist clockwise. you really dont even need to push in much at all.