Boost Guage Install?

**Auditude2.0T** · 06-30-2008 11:10 AM

I just received my VMR Boost gauge. Looks great and fast shipping just doesn't have instructions. Anyone have any write ups?? TIA

**VMRWheels** · 06-30-2008 01:36 PM

Originally Posted by Auditude2.0T

I just received my VMR Boost gauge. Looks great and fast shipping just doesn't have instructions. Anyone have any write ups?? TIA

I believe intructions are currently in the process. Please PM VMRSport for more info.

-Charles@VMRWheels
www.vmrwheels.com

**cstarky15** · 06-30-2008 02:08 PM

I would for the most part follow AWE's instructions. That is until VMR gets theirs up and going.

**Todd/AWE** · 06-30-2008 02:10 PM

Originally Posted by cstarky15

I would for the most part follow AWE's instructions. That is until VMR gets theirs up and going.

How classy!

**Auditude2.0T** · 06-30-2008 02:36 PM

AWE is great but the 120 dollars i saved by not going for the AWE Boost Gauge is going towards the AWE BT Kit!!!

**Phrost** · 06-30-2008 03:05 PM

They are all pretty much the same depending on how your gauge is mounted. Here is the DIY I followed from Podi when I installed mine http://podi.ca/Installation.aspx

**VMRSport** · 06-30-2008 04:04 PM

If you need directions, or help with the install, you can PM or e-mail me.

[email protected]

thanks.

-Don

**Phrost** · 06-30-2008 06:41 PM

^ good customer service there

**VMRSport** · 06-30-2008 06:47 PM

I've even taken phone calls in the office, and on my cell phone when I am not there, to help people with their installs. Hopefully I can get this DIY done this week, and it'll cut most of those phone calls down, since the guide is very thorough and has lots of pictures.

**Grishbok** · 06-30-2008 07:11 PM

I just got my VMR boost gauge, will be doing the installation and write up with pictures this Wednesday alongside GlassandPowder at the Tysons gtg spot. This gauge looks so sweet and polished, i cant wait to get it installed!

**cstarky15** · 06-30-2008 11:53 PM

I might pony up the bucks for it. it sounds soo nice!

**VMRSport** · 07-01-2008 02:51 PM

Yea, let me know if you have any questions about the boost gauge or anything else.

-Don

**ddelano** · 02-04-2011 04:34 PM

Hi Don - could you please send me instructions for a B6 Avant 6 speed 2.0T installation? My e-mail address is [email protected]

Thanks!

**texasboy21** · 02-04-2011 06:40 PM

What are yall using to actually wire up the gauge? I want to install my buddies podi and dont know what to use. On my B6 I used solder

**Coderedpl** · 02-04-2011 06:55 PM

I think that's a first...3 years later and the thread gets bumped. I didnt have to solder shit. Just spliced some wires and thats it. I spliced into the middle vent. Incase you never noticed it has lights, so if you tap into those it will light up :)

**deeznuts** · 02-04-2011 09:19 PM

IMO a boost gauge is a boost gauge....i opted for the vmr one myself, not because of the price but because it didnt have any logos on it and it looked more OEM...when i installed mine i just called vmr and then emailed me the instructions within 5 minutes. I was content

**rvca3112** · 02-05-2011 12:38 AM

difficult to install?

**deeznuts** · 02-05-2011 06:00 AM

the concept of the install is extremely simple- but it took me a while to complete the install because i had trouble feeding the vacuum line through the firewall..but once you feed the hose, its simple from there