So...Is this Y I need ecodes....

[1stb6]

FINALLY decided to try and properly align my just installed VVME HID's in my OEM HALOGEN housings..... Its looks like this...
Top: Stock look before install
Middle: How it was from lights turned on right after install
Bottom: How it looks no matter how i adjust them...(up or down/Left or Right)



I cant get rid of the second "z" line....Is this why i need ecodes? My stock halogen lights did not have the second "z".....

If thats the case im gettin some....HOWEVER....if i messed up my headlight housing RE-Installation....I NEED TO KNOW!! I HATE THE WAY IT LOOKS!! AHH

[toaster]

i have no idea what's going on here, but i thought of this:



explain your issue a little more clearly and we'll help you out brotha!

[akaEsCo01]

Your issue is very clear. No matter what you do, I doubt you will get it to look like xenon housings

[aaaudiprotein]

Yep, mine look like yours.

[absolutegtr]

mine looks like the middle drawing.....but i went with the OEM retrofit kit from akinaboy

[Frey7190]

Mine look like the middle drawing line.. Only thing is... My headlights are stock 04 xenon a4 lights... The only thing done to them is the clear mod. Can this be adjusted so there one flat line, like on my RX330.??

[B-Rob]

Mine look like that every time I pull into my garage, but they straighten out when I get the car exactly perpendicular to the wall. They stay kinked like that right up until the last second though. If you're SURE you're car is straight with the wall, try adjusting the yaw (side to side rotation) of each headlight.

[akaEsCo01]

Mine look like the middle drawing line.. Only thing is... My headlights are stock 04 xenon a4 lights... The only thing done to them is the clear mod. Can this be adjusted so there one flat line, like on my RX330.??

It's not supposed to be a flat line, your driver side is supposed to be lower than the passenger side. A proper beam should look like a backwards Z

[Tgr_Clw]

Ecodes. The only way to fly:

[1stb6]

Thanks everybody.....So i feel better. I will just adjust so its decent at 15-20' from wall.

Im also glad that most people could grasp a concept from my "MSPaint-etchah'sketch-3second-quickdraw-soicouldgetananswer" drawing....



NO OFFENCE OR ANYTHING TOASTER (just havin a GREAT day and havin fun)

[mxrz]

Ecodes. The only way to fly:

Not really, I much prefer the DOT pattern and cutoff, it provides for little more light above the cutoff, so highway signs are better illuminated. Ecodes are much darker above the cutoff.

[Tgr_Clw]

Not really, I much prefer the DOT pattern and cutoff, it provides for little more light above the cutoff, so highway signs are better illuminated. Ecodes are much darker above the cutoff.

To each his own, but I personally like as much light on the road as possible. I still have no problems seeing highway signs.

[mxrz]

To each his own, but I personally like as much light on the road as possible. I still have no problems seeing highway signs.

I don't see a lack of light on the road with DOT spec beams

[Tgr_Clw]

I don't see a lack of light on the road with DOT spec beams

Better light distribution (more even) with the ECE spec.

[Siggiepop]

i have no trouble seeing with the s2000 =)

[Tgr_Clw]

i have no trouble seeing with the s2000 =)

S2000 has amazing light output

[mxrz]

Better light distribution (more even) with the ECE spec.

That's a matter of opinion, I want light in certain areas, less so in others, so even doesn't really mean better.